Model BM-3007

This will provide a transition from the round supply air opening of the air handler and convert it for the square ducts currently being used by Spacepak.

Model SPS-PD

The square plenum duct comes in 4 ft. lengths, 6 per carton for a total of 24 ft. This is the main trunk line and is used as the connection point for the 2" supply tubing.

Model SPC-3, for use with 2 & 2.5 ton systems
Model SPC-4, for use with 3 & 3.5 ton systems
Model SPC-5, for use with 4 & 5 ton systems

The flexible return air duct is sold in 10 ft. lengths and is used as the main return air duct for the air handler. Specify system size at check out.

Model SPC-1D

The return air box with filter and grille will mount in either the ceiling or a sidewall and will provide the return air opening that will connect to the flexible return air duct.

Model SPS-EC-10

The plenum end cap will connect to the end of the square plenum duct trunkline and forms a termination point for the trunkline.

Model SPC-71-10

This proprietary Spacepak tool is used to cut the openings in the square plenum duct for the 2" supply tubing connections.

This proprietary Spacepak tool is designed for easier installation and to assure full setting of all four clips (fasteners) in the plenum take-off of the 2" supply tubing, guaranteeing a sturdy, air-tight connection

The plenum tee is used wherever a "T" is formed in the main plenum duct.

The 90 degree elbow is used where a 90 degree turn is required in the main plenum duct.

The 45 degree elbow is used where a 45 degree turn is required in the main plenum duct.