|
|
|
| Send to friend | |
| Product rating | |
The Goodman 95% Two Stage Variable Speed Furnace
Choose The Best Level Of Energy Efficiency
Finding a balance between your family's comfort and monthly energy costs is not always easy. The new Goodman GMH95 series 95% high efficiency furnace with multi-speed blower may just be the cost effective answer you're looking for.
And The Savings Don't End There
This Goodman furnace's 95% AFUE rating means 95 cents of each $1.00 of heating energy expense warms your home. Some older furnaces rate at only 60% AFUE, meaning only 60 cents of the fuel burned contributes to your home's heating.
The remaining 40 cents is lost energy--wasteful and expensive. Best of all, the Goodman 95% efficient furnace can lower your energy consumption by up to 50% when compared to an older, inefficient furnace.
Two Stage - Why Less Is More
The two-stage feature of the Goodman GMV9 furnace is like having two furnaces in one. On the coldest days, the furnace operates in the high-stage mode at 100% capacity. But on most days, the furnace comfortably conserves energy by operating in the low-stage mode at just 70% capacity.
The GMH9 two-stage gas valve runs quietly on low stage 90% of the time, producing just 25% of the normal high-fire sound while significantly reducing energy consumption.
Standard Features
- Corrosion-resistant, aluminized-steel tubular heat exchanger and stainless-steel recuperative coil
- Lifetime Limited Warranty on Heat Exchanger plus 10-year Furnace Replacement Limited Warranty
- Designed for multi-position installation ? upflow, horizontal right or left
- Energy-saving Hot Surface Ignition system with Norton® Mini-Igniter and patented adaptive learning algorithm
- Energy-saving PSC, multi-speed, direct-drive blower motor
- Quiet, corrosion-resistant, induced-draft blower assembly
- Integrated furnace control with diagnostics
- Low-voltage terminal blocks
- Suitable for direct vent (2-pipe) or non-direct vent (1-pipe) applications
- Convenient left or right connection for gas and electric service
- All models comply with California NOx Standards
- 2-stage gas valve for efficient and cost effective operation
Cabinet Features
- Heavy-gauge, reinforced, fully insulated steel cabinet with durable, Architectural Gray baked-enamel finish
- Top venting is standard; alternate flue/vent located on right side
- Foil-faced insulation lines the heat exchanger compartment
- Bottom or side air inlet; removable, solid bottom
Special Sound Reducing Features
- Multi-speed blower motor
- Special sound isolated blower assembly
- Fully insulated cabinet
- Heavy gauge steel cabinet
You and your family will appreciate the whisper-quiet operation of the GMH9 furnace. Your Goodman furnace uses a multi-speed blower motor and a sound isolating assembly to reduce the noise common in other furnaces.
Upgraded Reliability For Longer Life
Goodman packs all the latest high-technology features into this furnace without breaking your budget.
Features like the energy-saving, reliable hot surface ignition system with patented adaptive learning algorithm to maximize the igniter life and the patented, corrosion-resistant, aluminized steel tubular heat exchanger with a stainless-steel recuperative coil for many years of trouble-free service.
In fact, Goodman guarantees the performance and backs with a Limited Lifetime Warranty. The GMH9 furnace is easily converted for use with propane with the addition of the field installed LPT-01A propane conversion kit for only $129.00.
The high-efficiency combustion process allows venting with 2 or 3 inch PVC without the need for a traditional chimney flue. And because it can be direct-vented to the outside fresh air can be used for combustion.
This is helpful if the air in the vicinity of the furnace is corrosive, such as around paint or chemical storage, and will protect the heat exchanger from the harmful effects.
As an added feature not commonly found on many furnaces, the Goodman 95% efficient furnace is a low Nox furnace, which emits fewer oxides of nitrogen than ordinary furnaces, contributing to better air quality.
The fuel stingy auto-ignition system eliminates the old-fashioned standing pilot for greater ignition dependability without the wasted energy.
Designed For Easier Installation
The furnace can be installed in an upflow position (ductwork above the furnace) or horizontally (furnace in an attic or crawlspace) without the need for modification.
Your installer will appreciate the thoughtful installation flexibility provided by the alternate top or right-hand flue venting. The convenient left or right connection for gas and electric service will make installation a snap.
The GMV9 series furnace can be installed almost anywhere in your home, including the attic, crawlspace, garage, closet, or alcove. The return air can be ducted through either side or from the bottom, depending on your particular need.
If your replacing a similar furnace with this Goodman GMV9 series furnace it will normally require about 4-6 hours to complete the job. Goodman has thought of just about everything to make installation quick and easy.
Finally the GMV9 furnace features a heavy-gauge, reinforced and insulated steel cabinet with a durable and attractive baked-enamel finish. This furnace will arrive at your home completely assembled and factory run-tested to ensure that your installation goes off without a hitch.
- One Goodman multi speed natural gas furnace (Model # GMH950703BXA)
- Stimulus Tax Credit certified More...
- FREE Shipping ... Continental United States
- FREE Installation Guides ... Provided with all equipment purchases
Under the terms of all manufacturer's warranty and to comply with federal refrigerant handling laws, it is required that the system be checked, started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Failure to comply with this provision will void all factory warranties. Keep a copy of the installation ticket for your records. Please ensure that all supply and return ductwork is properly sized and that a permit is obtained (where required). Always conform with applicable local and state codes. Electrical connections should only be made by a licensed electrical contractor. Unqualified persons should never attempt installation of this or any HVAC system.
The Goodman Corporation
Goodman Manufacturing Company, L.P. ("Goodman") produces a complete line of residential and commercial air conditioning and heating equipment at its three modern, high technology factories, totaling over 1,200,000 square feet in Houston, Texas, Dayton and Fayetteville, Tennessee.
Goodman's equipment is sold through a worldwide network of independent distributors and installers who are dedicated to uphold the company's high standards of quality. In fact, Goodman is the second largest manufacturer of heating and cooling equipment in the world.
The Goodman philosophy: Be the highest quality, lowest cost producer of heating and air conditioning equipment in the world.
Is it successful? Goodman's share of the market has grown faster than any other major manufacturer. Goodman's Quality and Value speaks for itself.
Goodman has been very successful at increasing its presence in the mature HVAC industry, due primarily to the following philosophies:
- High quality at a low cost equals value
- Maintain low overhead
- Invest money normally spent on advertising and promotions in research and development, which translates to high quality at a low cost for the consumer
- Create products that are engineered for reliable long life, utilizing the best components with some of the lowest failure rates in the industry
- Offer one of the best warranties in the industry
| | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
