|
|
|
| Send to friend | |
What Is The Best Use Of Package Units?
This package unit is designed for ground level or roof-top installation and features a side-by-side supply and return duct configuration. Best uses include modular homes and mobile homes, flat rooftops, or any home with an open crawl space where the ductwork is under the floor.
If you have an existing package unit now (no indoor unit anywhere in the home), the replacement is easiest with a new package unit. A package unit is easily discerned, as it will have two ducts connected directly to it, outside you're home.
The Grandaire 13 SEER air conditioning package unit offers an outstanding combination of low cost and superior operating performance for residential and light commercial applications. This package unit will provide numerous options for contractors and homeowners looking for an all-in-one unit with hassle-free installation. Ask us if a package type unit is right for you.
The Importance Of 13 SEER
Seasonal Energy Efficiency Ratio (SEER) is the unit by which air conditioning efficiency is measured. In the world of air conditioning, the higher the SEER, the better the efficiency, and the lower your energy costs.
Minimum efficency established by the Department of Energy. Potential energy savings may vary depending on your personal lifestyle, system settings, equipment maintenance, local climate, actual construction and installation of equipment and duct system.
The Heart Of The System
The same parent company that manufactures quality brands such as Westinghouse, Maytag, and Frigidaire also makes Grandaire on the same assembly lines with the same commitment to quality.
The Grandaire name is not promoted as heavily so the marketing costs savings are passed along to you. Same quality, lower price.
For example, the Copeland Scroll compressor (the hardest working component) is absolutely the smoothest, quietest, most efficient compressor ever created. And because it has fewer moving parts, there is very little to wear out. In fact, over time this compressor will “wear in” becoming more efficient with time. More...
The Copeland Scroll Story:
Once in a while, a new technology is developed that gains widespread acceptance through superior function and design.
The Copeland Scroll Compressor has gained this respect and industry-wide acceptance through time-tested field use and not from laboratory theory.
The Copeland Scroll Compressor has proven itself to be the quietest and most dependable ever created.
Here is why:
The Copeland Scroll technology is based on the concept of compliance. Two scroll members interact to simultaneously achieve high efficiency and durability.
This efficient "twisting" motion greatly reduces the numbers of parts that can fail while eliminating the inefficient up and down piston motion of ordinary compressors.
- Continuous flank contact, maintained by centrifugal force, minimizes gas leakage and maximizes efficiency.
- Radial compliance allows the scroll members to separate the presence of liquid refrigerant or debris, thereby substantially improving durability and reliability.
- Axial compliance allows the scroll to remain in continuous contact in all normal operating conditions, ensuring minimal leakage without the use of tip seals.
- Both radial and axial compliance allow the scroll members to actually "wear in" rather than wear out.
Selecting The Proper System Is Easier Than Ever
Up to now selecting the proper size air conditioning system has been difficult for both dealers and homeowners. AC4Life has made it possible for the first time for you to properly select the right capacity for your home with our online sizing calculator .
You can select from a simple calculator for a general idea to our optimized software program that allows you to input the required information about your home and lifestyle for the most accurate and economical way to ensure comfort and efficiency. The small fee for this software is refundable with any complete system purchase.
If the software program is not for you we offer an exclusive service where an experienced sizing professional will do the work for you. The small fee for this convenient service is also refundable with any complete system purchase.
You can also obtain the model of the outdoor unit from a small nomenclature plate on the exterior of the unit. Simply call us and we will tell you what size (tonnage) system that you have now.
You can always call us toll-free at 1-866-862-8922 and our experienced system designers will happily assist you in the selection process.
No more missed appointments or intrusive high pressure salespeople in your home. Work right from your computer in the comfort of your home. Once you have selected the correct size simply browse the choices offered on this site and place your order on the web or call us.
Engineered For Quality
In addition to providing you with better indoor comfort, we want you to feel comfortable investing in a product that will perform when you need it most.
That's why each Grandaire air conditioner package system is checked approximately 78 times during the manufacturing process, then run-tested to check for operation performance.
When it comes to compressor reliability, Grandaire products continue to be recognized for outlasting other manufacturers who use the same compressor .
In fact, the compressor manufacturer reported that Grandaire performed 35% better than the industry standard.
In the final analysis, computer-automated testing is performed to capture operational data for future reference should we ever need it for service. Grandaire products are built with proven components to provide safe, clean and reliable comfort year-round.
Grandaire package air conditioners meet the Energy Star guidelines for efficient performance. The bottom line to you is savings in your utility costs.
Best-in-the-Business Warranties
When a complete heating and cooling system is truly built to exacting standards of quality and durability, the manufacturer's confidence shows in its warranty.
Grandaire and AC 4 Life provide a:
Supreme Durability
A protective guard protects the heat pump coil from damage by weather and flying debris. The exterior is finished with a silicone protective polyurethane coating that undergoes a 950-hour salt spray test for harsher climates. That's up to 90% better protection than standard outdoor finishes.
R-410a Refrigerant - Environmentally Friendly
Your new Grandaire 13 SEER central heating and air conditioning system is not only easy on your wallet, but is also easy on our environment.
Since this refrigerant does not contain Chlorine, it is more environmentally friendly than R-22 refrigerant, the refrigerant currently used in most air conditioning systems.
Introduced as the alternative to R-22, R-410a has helped increase the durability and reliability of air conditioning compressors.
ORDER NOW!!!
- One 13 SEER GP6SDX Series Grandaire packaged air conditioning unit Model # GP6SDX36K with Earth Friendly R-410a refrigerant
- FREE Shipping ... Continental United States
- FREE Installation Guides ... Provided with all equipment purchases
Under the terms of all manufacturer's warranty and to comply with federal refrigerant handling laws, it is required that the system be checked, started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Failure to comply with this provision will void all factory warranties. Keep a copy of the installation ticket for your records. Please ensure that all supply and return ductwork is properly sized and that a permit is obtained (where required). Always conform with applicable local and state codes. Electrical connections should only be made by a licensed electrical contractor. Unqualified persons should never attempt installation of this or any HVAC system.
Nordyne Background
NORDYNE is a product driven indoor comfort systems manufacturer. We differentiate ourselves through product innovation, quality and service.
We develop, manufacture and launch products ahead of the competition; creating an outstanding value proposition for each step of the channel.
Our philosophy is simple.... use proven technology to build reliable products for customers.
For over 80+ years, NORDYNE has been designing and manufacturing heating and cooling products. Our philosophy is simple.... use proven technology to build reliable products for customers.
We choose only reliable components to build our heating and cooling systems. Along with these components, our units are designed and tested for reliability, safety and efficiencies. We test "combination systems" so when you put one of our furnaces with one of our air conditioners you know they will deliver the most reliable home comfort, while taking advantage of the best efficiencies of each product installed.
As you know, design and testing products are just the preface to executing the deliverables...we take just as much pride in our manufacturing process. While most manufacturers use batch processing techniques and randomly tests products, we have a unique approach. We use Demand Flow Technology® (DFT) to build high quality products for all of our customers.
DFT has many unique benefits, but the most beneficial to the buyer is the results. We build quality into our product at every step in the manufacturing process. On our manufacturing line everyone touching your product is triple checking the workmanship. Then, each product is 100% computer-automated tested, to remove human error in the final analysis. NORDYNE is the only heating and cooling manufacturer to be DFT certified. As a result, the benefit of our products is reliability...it shows in our product warranties and our brand names.
While you may not have heard of NORDYNE before, you certainly have heard of our brands. In our residential and commercial business, NORDYNE makes Frigidaire, Tappan, Philco, Westinghouse, Kelvinator and Gibson central heating and cooling systems. Because NORDYNE products and business practices are highly regarded in the heating and cooling industry, our products feature some of the most recognized consumer brands in the appliance industry. Additionally, our brands are designed to fit a variety of buyer needs.
NORDYNE also has had an important role in the manufactured home environment for decades. Because of our years of experience with this industry we understand the importance of a matched system and designing products unique to manufactured homes. That is why most manufactured homes built today (and of years past) feature our Intertherm and Miller heating and cooling products. Historically, these brands boast some of the "firsts" in heating and cooling technology for the manufactured home buyer, dating back to the early 1900's.
NORDYNE supports the traditional marketing chain in the heating and cooling industry. We sell to independent distributors to provide our products nationwide. In turn, they sell to independent licensed dealers or contractors to sell and install products at the consumer level. To assure our product delivers the same quality and efficiencies originally built at the manufacturing level, be sure to check out our consumer tips featured at each of our brand site to help you select the right contractor. While there you can browse specific product feature information.
Grandaire heating and cooling products are backed by some of the best warranties, including our quality pledge : We will guarantee the replacement of your unit if you have a major component failure within the first ten years of ownership. Continuous flank contact, maintained by centrifugal force, minimizes gas leakage and maximizes efficiency.
We use a manufacturing process unique to the heating and cooling industry. While most manufacturers test their products at random, we test each and every furnace and air conditioner we manufacture.
Today, we offer a wide variety of heating and cooling products and your Grandaire dealer can recommend a system to meet your budget and comfort needs.
HERE IS YOUR WARRANTY COVERAGE! (Learn More)
COMPONENT
- All PARTS
- COMPRESSOR
WARRANTY√
- 10 years
- 10 years
*Labor is not covered under the terms of the manufacturer's warranty
* This unit is approved for use in mobile homes
Under the terms of all manufacturer's warranty and to comply with federal refrigerant handling laws, it is required that the system be checked and started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Please ensure that all supply and return ductwork is properly sized and that the installation is permitted (where required) and conforms with local and state codes. Electrical connections should always be made by a licensed electrical contractor.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
