A heat pump is a central air conditioning and highly efficient heating system that will "extract" heat from the air in the wintertime for cost effective heating comfort in all but the most severe winter climates. The system actually "reverse-cycles" in the heating mode and captures heat from outside and "pumps" it into your home.
The Best Compressor Ever Made - Period
The Fedders 13 seer heat pump condensers represent the latest generation design, packed with high technology features - Like the Copeland Scroll Compressor , absolutely the smoothest, quietest, most durable compressor ever developed.
Because it has fewer moving parts, there is very little to wear out. In fact, over time this compressor actually "wears in" and becomes more efficient.
The Copeland Scroll Compressor has proven itself to be the quietest and most dependable ever created.
Unlike a furnace it doesn't burn fuel to make heat. It simply uses electricity to move heat from one place to another. In the cooling mode, an air conditioner or heat pump simply capture heat from inside your home and transfer it outside.
In heating, a heat pump actually reverse-cycles and captures heat from outside and moves it inside. This process is more efficient than electric heat as it is much less expensive to transfer existing heat than to actually generate it.
There is usable heat in the air down to about 0 degrees Fahrenheit. It feels cold to us because our skin temperature is 98.6 degrees.
A heat pump's heating capacity is rated at 47 degrees ambient (outside) temperature.
As the outside temperature drops the heat pumps capacity drops in a linear fashion relative to the outdoor temperature.
Most heat pumps will produce about half of their rated capacity at 12 degrees ambient. An electric heating element provides supplemental heat to assist the heat pump as it's capacity declines.
The heat pump monitors both the outdoor temperature and inside supply air temperature and energizes the assist as needed, automatically.
High End Features Without The High End Price
Quality Built
- Galvanized steel exterior cabinet
- 1,000-hour salt spray, appliance grade finish
- Powder-coated finish
- Full louvered panel to protect coil
- Formed base with 2.5" ground clearance
- Limited 5 year factory warranty on all parts
Easy to Install
- Factory-charged with R-22 refrigerant
- Only 3 screws to access electrical controls
- Easy access to service valves
Refrigerant Circuit
- Factory installed liquid line dryer
- Long life copper tubes, aluminum fins
- State-of-the-art compressors
- Large, wrap-around coil surface
Performance
- Efficiency rating of 13 seer
- Cooling capacities from 1.5 to 5.0 tons
High Performance
Operation For
Lower Energy Costs
Your air conditioning and heating equipment must properly heat and cool your home in extreme and every-day weather conditions but if the energy required to power these units is too high, your family may have to sacrifice comfort for costs savings.
A Fedders central air conditioning system is both energy efficient and affordable. If your current air conditioner is 10 years or older, there is a strong likelihood that energy costs are higher than necessary.
When you purchase a new, inexpensive Fedders 13 seer air conditioning system you will see savings on your first electric bill. And you'll be doing your part to help reduce harmful pollutants in the environment.
Fedders - A Warranty That Really Means Business
While all manufacturers offer a parts warranty on equipment they sell, none has commited to internet purchases the way that Fedders has. Just about every other brand has severe internet limitations or outright warranty exclusions for equipment purchased via the internet.
Why take chances with expensive warranty parts repairs?
When you purchase your Fedders air conditioning system from AC Direct, you'll not only get the guaranteed lowest price, but also a Fedders factory assurance that your parts warranty will be there when you need it most.
Simply have your initial system startup completed by a certified air conditioning contractor to validate your parts warranty for its full term.
Quality is Paramount
When you purchase a Fedders air conditioner for your home, you have a system that has been expertly manufactured and thoroughly tested to meet the company's single, worldwide standard of quality.
Quality Assurance (QA) and Quality Control (QC) personnel operate at every production facility around the globe. Fedders QC personnel also visit component manufacturers to ensure that the suppliers' manufacturing processes meet the high standards set by Fedders.
In addition, by capitalizing on cost savings afforded by its global manufacturing operations and using the latest, most modern manufacturing technologies, Fedders is able to produce the highest quality products and offer them to you at competitive prices.
The newest Fedders 13 seer air conditioning condensers represent the latest generation design, packed with high technology features. And, this latest model is not only an outstanding value, but also one of the most attractive models available with a modern design, quality fit and finish, and outstanding structural integrity.
One outdoor Fedders air conditioning unit (Model # CH42ACD1VF)
One factory matched indoor air (Model # AFPC48A1)
One electric heating element
FREE Shipping ... Continental United States
FREE Installation Guides ... Provided with all equipment purchases
Under the terms of all manufacturer's warranty and to comply with federal refrigerant handling laws, it is required that the system be checked, started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Failure to comply with this provision will void all factory warranties. Keep a copy of the installation ticket for your records. Please ensure that all supply and return ductwork is properly sized and that a permit is obtained (where required). Always conform with applicable local and state codes. Electrical connections should only be made by a licensed electrical contractor. Unqualified persons should never attempt installation of this or any HVAC system.
Fedders
Fedders Corporation of Liberty Corner, N.J., provides air conditioning and other air treatment products for commercial and residential applications to markets worldwide.
Product lines include residential central air conditioning systems, including condensing units, air handlers, gas furnaces, air cleaners, and humidifiers, vertical and horizontal packaged air conditioners and heat pumps for commercial, residential and telecommunications applications and also, appliance air treatment products.
Fedders Residential Central Air Products provide a wide variety of solutions for the value-minded homeowner who seeks high quality, whole house comfort.
Fedders, Trion by Fedders, and Herrmidifier by Fedders, brands deliver high efficiency, central air conditioning products, heating products, and products providing optimum humidity control for increased comfort and health, and powerful air purification that replaces often inadequate standard filtration.
Fedders Commercial Products is comprised of popular brands. Products by Fedders, Islandaire, and Trion provide a wide range of designs for Commercial HVAC applications.
Employing some of the most innovative ideas in the industry, these models deliver high efficiency, dependable air conditioning, heating and air filtration for numerous commercial applications including modular buildings, telecommunications towers, schools, hotels, restaurants, shopping centers, hospitals and offices.
Fedders, a leading air conditioning manufacturer, offers a full line of window air conditioners, portable air conditioners, through the wall air conditioners, air conditioners for casement windows and wall hung ductless mini split air conditioners.
Available under the Fedders, or Maytag brands, these products provide quiet, efficient comfort for any home.
HERE IS YOUR WARRANTY COVERAGE!
COMPONENT
OUTDOOR UNIT
COMPRESSOR
INDOOR UNIT
PARTS
5 years
5 years
5 years
*Labor is not covered under the terms of the manufacturer's warranty
* This unit is not approved for use in mobile homes
Under the terms of all manufacturer's warranty and to comply with federal refrigerant handling laws, it is required that the system be checked and started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Please ensure that all supply and return ductwork is properly sized and that the installation is permitted (where required) and conforms with local and state codes. Electrical connections should always be made by a licensed electrical contractor.
Energy Efficiency Equals Energy Savings
• A permanently lubricated permanent split capacitor (PSC) motor in the air handler adapts the air flow to your home’s heating and cooling requirements; providing more consistent temperatures and improved air filtration throughout the home.
• The multi-speed blower also offers quieter, vibration-free operation and uses less energy than conventional units that continuously start and stop when the desired room temperature has been reached.
• Air handlers from Fedders can integrate a full range of cooling coils, including 13 SEER, enabling them to be used with any Fedders 10, 12 or 13 SEER remote condensing and/or heat pump units. The Fedders Air Handler, combined with a Fedders 13 SEER Coil, can deliver considerable energy savings
• All Fedders multi-positional Air Handlers are capable of upflow, downflow and horizontal left or right flow to match all installation requirements
The Perfect Companion To You Fedders System
Your home’s air handler is more than the indoor companion to your heat pump or air
conditioner; the proper air handler – such as those from Fedders – will maximize the
indoor air comfort in your home, use less energy and reduce your energy bills.
The air handler’s primary function is to circulate air throughout your home; hot in the winter, cool in the summer. The more efficient your air handler is, the more comfortable your home will be.
With air-handling capacities from 1-1/2 to 5 tons, Fedders Air Handlers are rated in accordance with the Department of Energy (DOE) and the Air-Conditioning and Refrigeration Institute (ARI) test standards so they can offer the efficiency, reliability and durability you need
– with the reputation for high quality and affordability that Fedders is known for.
The appliance-grade finish features a strong, unitized, galvanized steel construction with a fully insulated, 20-gauge painted cabinet.
The unit’s full 1-inch insulation with foil facing provides superior insulating properties, eliminates dust and fiber particulate from the air stream and offers noise reduction.
All units feature high temperature, glass-filled polypropylene vertical and horizontal drain pans and a large filter door that provides easy access for filter replacement.
The Fedders Air Handler is the perfect complement to a Fedders high-quality, high performance heat pump or air conditioning unit.
A total indoor air solution designed for maximum efficiency, long life and your total comfort.
Heat Pump Technology 
Because it has fewer moving parts, there is very little to wear out. In fact, over time this compressor actually "wears in" and becomes more efficient. 
The appliance-grade finish features a strong, unitized, galvanized steel construction with a fully insulated, 20-gauge painted cabinet. 
