Ruud UPRL Series
The Copeland Two-stage Scroll Compressor The UPRL Series Ruud 16 SEER heat pump condensers represent the latest generation design, packed with high technology features -- Like the Copeland Scroll compressor, absolutely the smoothest, quietest, most durable compressor ever developed. Because it has fewer moving parts, there is very little to wear out. In fact, over time this compressor actually “wears in” and becomes more efficient. Scroll Details The Environmentally-Friendly R-410a Refrigerant provides additional peace of mind because your new system won't harm the environment and meets the standards set by the federal government. The cost of service will potentially be reduced in the future as older refrigerants (R-22) are gradually phased out through federally legislated production limitations. Two-Stage Cooling Function means that your system will spend about 80% of the time operating in low-speed cooling, The system will operate for longer periods in a super efficient mode resulting in lower operating noise, better humidity control, and less variation in temperature throughout your home. You will experience comfort like never before. Make An Investment In Savings With Efficient performance
The Ruud super efficient heat pumps feature SEER ratings of 16, making it one the most energy efficient choices for home comfort. Compared with a 15 year old system, you could save up to 55% on your energy bill. Here's a savings example for a 3 ton system: Annual operating costs for a 15 year old, 8 SEER system--$810.00* Annual operating costs for a Ruud 16 SEER system---$396.00* If you live in very warm climate your savings could be even greater.
SEER stands for Seasonal Energy Efficiency Ratio. SEER gives an indication of the energy efficiency of the system. The higher the SEER, the more efficient the unit. And, the more efficient the unit, the lower your energy costs. When you purchase a system with a high SEER, you'll use less energy to cool your house, resulting in lower electric bills. In many cases, these savings are enough to partially or fully offset the cost of the new equipment within a few years. HSPF provides an efficiency rating for the heating capacity of a heat pump. HSPF stands for Heating Seasonal Performance Factor. This is a comparison of the heating efficiency and with ratings of up to 9.5, the Ruud UPRL series heat pump systems far exceed the federal minimum. The UPRL series 16 seer Ruud heat pump air conditioning system can lower your energy costs by 50% or more when compared to an 8 seer/5.6 HSPF system. * Based on .10 cents average per Kilowatt Hour and 1800 annual operating hours
Quiet comfortThe Ruud 16 SEER super efficient heat pump operates at one of the lowest sound levels available. Here's why :
The last thing you want is to hear a noisy air conditioner starting up at night. Ruud understands and builds each unit to ensure that your air conditioning won't interfere with a good night's sleep. Comfort Control System - A Ruud ExclusiveThe Comfort Control System provides:
Durable constructionMaterials for all components are factory tested and engineered for long-lasting performance and reliability.
Improved air quality![]() The variable speed air handler that is matched with this system is not only among the quietest made but can significantly reduce air conditioning humidity levels in your home. And, when you add one of our whole-house air cleaners to your system, you will experience a reduction in dust, pollen and other allergens throughout your entire home resulting in a cleaner, healthier, more comfortable home. Affordable and Efficient PerformanceDon't let the affordable price tag fool you– Buying direct eliminates many layers of overhead from your purchase and Ruud is a leader in home heating and cooling systems with over 100 years of experience. In fact, the leading consumer advocacy group awarded the Ruud Brand a top quality rating for durability. Quality claims are a dime a dozen but Ruud's dependability is documented and reflects a quality commitment rarely matched in the industry today. * The manufacturer requires that the system be started up and checked by a licensed ac contractor prior to use to validate system warranty and comply with EPA refrigerant handling laws.
Plus, to save costs at installation time, the Ruud heat pump condensers are pre-charged with R-410A refrigerant for up to 15-20 feet of tubing. The new UPRL series super efficient Ruud heat pump air conditioners offer affordable, reliable, and quiet operation you can count on year after year. R-410a Refrigerant - Environmentally Friendly
Additional Outstanding Features
Copeland Scroll Compressor Details The Copeland Scroll Compressor has proven itself to be the quietest and most dependable ever created. Here's why: The Copeland Scroll technology is based on the concept of compliance.Two scroll members interact to simultaneously achieve high efficiency and durability.
This efficient twisting motion greatly reduces the numbers of parts that can fail while eliminating the inefficient up and down piston motion of ordinary compressors. This unique and patented approach. achieving both radial and axial compliance - provides important advantages:
Best-in-the-Business WarrantiesWhen a complete heating and cooling system is truly built to exacting standards of quality and durability, the manufacturer's confidence shows in its warranty. Ruud and AC Direct provide a:
ORDER NOW!!!
Under the terms of all manufacturer's warranty and to comply with federal refrigerant handling laws, it is required that the system be checked, started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Failure to comply with this provision will void all factory warranties. Keep a copy of the installation ticket for your records. Please ensure that all supply and return ductwork is properly sized and that a permit is obtained (where required). Always conform with applicable local and state codes. Electrical connections should only be made by a licensed electrical contractor. Unqualified persons should never attempt installation of this or any HVAC system. The Ruud Corporation
A 100-Year Tradition of Reliability More than 100 years ago, Edwin Ruud, a Norwegian mechanical engineer, came to America and developed the first successful automatic water heater. That early success marked the beginning of a tradition of innovation and value that led to the introduction of RUUD heating and air conditioning equipment in the 1950s. Since then, the RUUD Air Conditioning Division has grown into one of North America's largest manufacturers of quality cooling and heating products for residential and light commercial use. Today, RUUD operates two manufacturing facilities in Arkansas and Georgia - both employing highly trained workers and state-of-the-art equipment. These facilities offer more than two million combined square feet of manufacturing, research and development, and office space. Over the years, the product lines have expanded, changed, and improved significantly as new design techniques and better manufacturing technologies have become available. What remains unchanged throughout RUUD's history is their commitment to producing the most reliable, long-lasting, efficient equipment you can buy. HERE IS YOUR WARRANTY COVERAGE! COMPONENT
PARTS √
*Labor is not covered under the terms of the manufacturer's warranty
Under the terms of all manufacturer's warranty and to comply with federal refrigerant handling laws, it is required that the system be checked and started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Please ensure that all supply and return ductwork is properly sized and that the installation is permitted (where required) and conforms with local and state codes. Electrical connections should always be made by a licensed electrical contractor.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The UHPL series factory matched Ruud variable speed air handler is the answer to superior heating and cooling performance. For quiet performance, improved humidity control and greater comfort in both heating and cooling this air handler simply out- performs the competition
A variable speed air handler is dramatically different from a standard air handler in that it features the high efficiency Electronically Commutated Motor (ECM) by General Electric.
The Ruud UHPL series variable speed air handler provides whisper-quiet air delivery thanks to the General Electric variable speed DC motor. By “ramping up” slowly at startup, this motor completely eliminates the harsh “impact” noises created by full speed startup in ordinary air handlers.
This “soft start” significantly reduces fan and motor noise so you can rest easy. You simply can't buy a quieter air handler. Best of all, this air handler functions automatically - No adjustments or controls to fiddle with. Just set your thermostat and walk away. The air handler senses the optimum operating parameters while you and your family enjoy the performance that only variable speed technology can provide.
Less Really Is More because the ECM Motor enhances performance because full air delivery is only needed a small portion of the time.
During lower demand times this motor reduces its speed, providing up to 4 times better humidity control, better air distribution throughout your home, and greatly reduced operating costs.
Better air distribution will provide a marked improvement in those areas of your home where air delivery has been a problem, such as the rooms farthest from the air handler.
Say Goodbye To Drafts with the Ruud variable speed air handler (when purchased with optional electric heating element). Wintertime drafts are caused by what is referred to as "cold blow," or the cold blast of air upon heating startup.
"Cold blow" results from cold air that develops in the duct system while the heat is in an off-cycle. When the air handler heater fan cycles on, this cold air is moved very quickly into your home, resulting in an uncomfortable draft.
This Ruud variable speed air handler virtually eliminates cold blow with a "soft start," or a gradual increase in fan speed over the initial 3 to 4 minutes of the on-cycle. This cold air is combined with preheated air from the air handler blower and is delivered at a slower velocity until it reaches full operating temperature.
The result?
Improved heating comfort and a dramatic reduction of the uncomfortable drafts associated with non-variable speed air handlers.
Ruud variable speed air handler quality features include

The ruud variable speed air handler that is factory matched with this system is not only among the quietest made but can significantly reduce cooling-mode humidity levels in your home. And, when you add one of our whole-house air cleaners to your system, you will experience a reduction in dust, pollen and other allergens throughout your entire home resulting in a cleaner, healthier, more comfortable home.
The Ruud variable speed air handler is versatile and can be installed as an upflow (ductwork above the air handler), downflow (ductwork under the air handler), and horizontally (air handler in an attic, crawlspace, or basement).
If you are capable, you can do most of the installation yourself and then set up a service call for a professional to come and open the refrigeration system and check the charge.
Any qualified air conditioning technician can install this system in your home or office. It will normally require about 5-8 hours to replace an existing, similar type system.
* The manufacturer requires that the system be started up and checked by a licensed ac contractor prior to use to validate system warranty and to comply with EPA refrigerant handling laws.
|
