|
|
|
| Send to friend | |
Ruud RQPM Series
The Ruud RQPM Series 14 seer heat pump package units with earth friendly R-410a refrigerant are a leap forward in providing low cost, superior operating performance for residential and light commercial applications.
They are mobile home approved and will provide numerous options for contractors and homeowners looking for an all-in-one unit with hassle-free installation.
FEATURES
- Copeland Scroll Compressor
- Copper Tube/ Aluminum Fin Coil construction
- Powder painted steel cabinet protects the coil
- Painted Base Pan for greater corrosion resistance
- Demand Defrost Control for improved performance
- Gauge Ports
- Control Box is fully accessible for ease of servicing
- Power and control wiring are kept separate
- Certified and rated under ARI Standard 240
What Is The Best Use Of Package Units?
This package unit is designed for ground level or roof-top installation and features a side-by-side supply and return duct configuration.
Best uses include modular homes and mobile homes, flat rooftops, or any home with an open crawl space where the ductwork is under the floor.
If you have an existing package unit now (no indoor unit anywhere in the home), the replacement is easiest with a new package unit.
A package unit is easily discerned, as it will have two ducts connected directly to it, outside you're home.
Top rated quality and value
The Ruud brand was recently given a top rating by the leading consumer advocacy group among all major heating and air conditioning manufacturers. Quality claims are a dime a dozen - documented and published results are much harder to come by.
The RQPM Series package heat pump unit's compact size and flush mount installation capability not only provide an attractive appearance that leaves no unsightly, dangerous or unsanitary gaps, but also better performance and energy efficiency as a result of additional coil clearance.
Additionally, full louver coil protection completely protects the coil from weather extremes and yard hazards. The cabinet has a powder painted finish that protects it from the harshest weather extremes and keeps it looking new for years.
All of these benefits and advantages make the RQPM series package unit the perfect choice for homes with space or ducting limitations.
Selecting The Proper System Is Easier Than Ever
Up to now selecting the proper size heat pump system has been difficult for both dealers and homeowners. AC 4 Life has made it possible, for the first time for you to properly select the right capacity for your home with our online sizing calculator .
You can select from a simple calculator for a general idea to our optimized software program that allows you to input the required information about your home and lifestyle for the most accurate and economical way to ensure comfort and efficiency. The small fee for this software is refundable with any complete system purchase.
If the software program is not for you we offer an exclusive service where an experienced sizing professional will do the work for you. The small fee for this convenient service is also refundable with any complete system purchase.
You can also obtain the model of the outdoor unit from a small nomenclature plate on the exterior of the unit. Simply call us and we will tell you what size (tonnage) system that you have now.
You can always call us toll-free at 1-866-862-8922 and our experienced system designers will happily assist you in the selection process.
No more missed appointments or intrusive high pressure salespeople in your home. Work right from your computer in the comfort of your home. Once you have selected the correct size simply browse the choices offered on this site and place your order on the web or call us.
Select Your Heating Element Capacity
The electric supplemental heating in this system is designed to provide assistance to the heat pump as neccessary. Simply select from the available options at checkout. The various element sizes and their heating output in Btu's are listed below:
Pricing includes up to a 15Kw heating element
Element
- 5Kw
- 8Kw
- 10Kw
- 15Kw
Output (Btu's)
- 17,000
- 27,000
- 34,000
- 51,000
Circuit (Amps)
- 30
- 50
- 60
- 80
A perfect package of features
Using a compact footprint in all sizes ranging from two to five tons, the Ruud RQPM Series mobile home approved package heat pump unit features the high-quality Copeland Scroll compressor, absolutely the smoothest, quietest, most durable compressor ever developed. Because it has fewer moving parts, there is very little to wear out. In fact, over time this compressor actually “wears in” and becomes more efficient. Scroll Details
Other features include forkable base rails that allow for separation between the unit base and the ground, a removable drain pan, easily accessible evaporator coil and indoor blower assembly; high-static airflow, and a field installed heat strip where heating is desired.
Designed with installation ease in mind
When Ruud engineers and product development teams finished the design, they traveled throughout North America asking for feedback from contractors on how to improve on the package unit design concept. The contractors provided many suggestions for installation and service-friendly design enhancements, and those changes were quickly incorporated into the final product design.
Ruud has designed this package heat pump for ground level or rooftop installation with a side-by-side supply and return duct configuration. It can be installed in mobile or modular homes, on flat rooftops, or any home with an open crawl space.
Any qualified air conditioning technician can easily install this equipment in your home or office. It will normally require about 4-6 hours to replace an existing, similar type system. For you do-it-yourselfers replacing an existing package unit, simply connect your existing supply and return ducts along with the electrical connections, and the installation is complete .
Only a qualified electrician should make the electrical connections and to validate the warranty you must have the system started up and checked by a licensed heating and cooling contractor. We don't believe you'll find a better combination of quality and value in package heat pump units anywhere, at any price.
Copeland Scroll Compressor Details
Once in a while, a new technology is developed that gains widespread acceptance through superior function and design;
the Copeland Scroll Compressor has gained respect and industry-wide acceptance through time-tested field use and not from laboratory theory.
The Copeland Scroll Compressor has proven itself to be the quietest and most dependable ever created.
Here's why:
The Copeland Scroll technology is based on the concept of compliance.Two scroll members interact to simultaneously achieve high efficiency and durability.
This efficient twisting motion greatly reduces the numbers of parts that can fail while eliminating the inefficient up and down piston motion of ordinary compressors.
This unique and patented approach. achieving both radial and axial compliance - provides important advantages:
- Continuous flank contact, maintained by centrifugal force, minimizes gas leakage and maximizes efficiency.
- Radial compliance allows the scroll members to separate the presence of liquid refrigerant or debris, thereby substantially improving durability and reliability.
- Axial compliance allows the scroll to remain in continuous contact in all normal operating conditions, ensuring minimal leakage without the use of tip seals.
- Both radial and axial compliance allow the scroll members to actually wear in rather than wear out.
Best-in-the-Business Warranties
When a complete heating and cooling system is truly built to exacting standards of quality and durability, the manufacturer's confidence shows in its warranty.
Ruud and AC 4 Life provide a:
ORDER NOW!!!
- One Ruud RQPM series 14 seer self contained air condtioning heat pump package unit (Model RQPMA030JK)
- One supplemental heating element up to 15 Kw. (10Kw for 2 ton)
- Stimulus Tax Credit certified More...
- FREE Shipping ... Continental United States
- FREE Installation Guides ... Provided with all equipment purchases
Under the terms of all manufacturer's warranty and to comply with federal refrigerant handling laws, it is required that the system be checked, started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Failure to comply with this provision will void all factory warranties. Keep a copy of the installation ticket for your records. Please ensure that all supply and return ductwork is properly sized and that a permit is obtained (where required). Always conform with applicable local and state codes. Electrical connections should only be made by a licensed electrical contractor. Unqualified persons should never attempt installation of this or any HVAC system.
The Ruud Corporation
A 100-Year Tradition of Reliability
More than 100 years ago, Edwin Ruud, a Norwegian mechanical engineer, came to America and developed the first successful automatic water heater. That early success marked the beginning of a tradition of innovation and value that led to the introduction of RUUD heating and air conditioning equipment in the 1950s.
Since then, the RUUD Air Conditioning Division has grown into one of North America's largest manufacturers of quality cooling and heating products for residential and light commercial use.
Today, RUUD operates two manufacturing facilities in Arkansas and Georgia - both employing highly trained workers and state-of-the-art equipment. These facilities offer more than two million combined square feet of manufacturing, research and development, and office space. Over the years, the product lines have expanded, changed, and improved significantly as new design techniques and better manufacturing technologies have become available.
What remains unchanged throughout RUUD's history is their commitment to producing the most reliable, long-lasting, efficient equipment you can buy.
HERE IS YOUR WARRANTY COVERAGE!
COMPONENT
- COMPRESSOR
- ALL OTHER PARTS
WARRANTY√
- 10 Years
- 5 years
*Labor is not covered under the terms of the manufacturer's warranty
* This unit is not approved for use in mobile homes
Under the terms of all manufacturer's warranty and to comply with federal refrigerant handling laws, it is required that the system be checked and started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Please ensure that all supply and return ductwork is properly sized and that the installation is permitted (where required) and conforms with local and state codes. Electrical connections should always be made by a licensed electrical contractor.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
