Heat Pump Technology Unbeatable Features At An Unbeatable Price
The Ruud UPNL series outdoor heat pump condensing unit offers not only high efficiency, power bill busting operation, but rock-solid, industry-leading quality and unmatched value as well. Need proof? You've got it in The Copeland Scroll compressor (the hardest working component). This is absolutely the smoothest, quietest, most efficient compressor ever developed. And because it has fewer moving parts, there is very little to wear out. In fact, over time this compressor will “wear in” becoming more efficient with time. (details) Ruud is the only manufacturer to install this amazing compressor in its entire residential product line. This scroll compressor will deliver years of reliable, trouble-free performance. Best of all, the high efficiency, 14 seer operation can reduce your cooling costs as much as 45% compared to the average 12 to 15 year old system. The outstanding Heating Seasonal Performance Factors (HSPF) of up to 9.5 can reduce heating costs by up to 65% compared to straight electric heat. We're sure you'll find better ways to spend the savings without handing it over to the power company. The Environmentally-Friendly R-410a Refrigerant provides additional peace of mind because your new system won't harm the environment and meets the standards set by the federal government. The cost of service will potentially be reduced in the future as older refrigerants (R-22) are gradually phased out through federally legislated production limitations Industry Leading QualityThe quality of this heat pump condenser is apparent the moment you remove the carton. The tough, protective cabinet features electro-statically applied paint that is then baked for long lasting good looks and protection. Yard debris and severe weather are no match for this solid, durable cabinet, featuring a steel reinforced top for maximum strength. The UPNL series heat pump models also feature a special sound-reducing package consisting of a PSC, 4 blade, 8-pole fan motor and discharge line muffler. The result? Quiet and smooth operation so you and your neighbors can rest easy.
Ruud installs protective high and low pressure controls to prevent damage to the compressor from pressure extremes. Why settle for less than the absolute highest measure of protection for your new system? This Ruud condenser is designed for ground level or rooftop mounting and is pre-charged with R-410a refrigerant. Make An Investment In Savings With Efficient performance![]() The UPNL series efficient Ruud heat pump feature SEER ratings of 14 and an HSPF of up to 9.5, making it an energy efficient choice for home comfort. Compared with a 15 year old system, you could save up to 45% on your energy bill. Here's a savings example for a 3 ton system: Annual operating costs for a 15 year old, 8 SEER system--$810.00* Annual operating costs for a Ruud 14 SEER system---$462.00* If you live in very warm climate your savings could be even greater. SEER stands for Seasonal Energy Efficiency Ratio. SEER gives an indication of the energy efficiency of the system. The higher the SEER, the more efficient the unit. And, the more efficient the unit, the lower your energy costs. When you purchase a system with a high SEER, you'll use less energy to cool your house, resulting in lower electric bills. In many cases, these savings are enough to partially or fully offset the cost of the new equipment within a few years. * Based on .10 cents average per Kilowatt Hour and 1800 annual operating hours Quiet comfortThe Ruud UPNL series heat pump operates at very low sound levels. Here's why :
Durable constructionMaterials for all components are factory tested and engineered for long-lasting performance and reliability.
Top Rated Quality From The Leading Consumer Advocacy Group
In fact, the Ruud Brand was awarded a top quality rating for durability by the leading consumer advocacy group. Quality claims are a dime a dozen but Ruud's dependability is documented and reflects a quality commitment rarely matched in the industry today. * The manufacturer requires that the system be started up and checked by a licensed ac contractor prior to use to validate system warranty and comply with EPA refrigerant handling laws. Plus, to save costs at installation time, the heat pump condenser is pre-charged with R-410a refrigerant for up to 15-20 feet of tubing. Copeland Scroll Compressor Details The Copeland Scroll Compressor has proven itself to be the quietest and most dependable ever created. Here's why: The Copeland Scroll technology is based on the concept of compliance.Two scroll members interact to simultaneously achieve high efficiency and durability.
This efficient twisting motion greatly reduces the numbers of parts that can fail while eliminating the inefficient up and down piston motion of ordinary compressors. This unique and patented approach. achieving both radial and axial compliance - provides important advantages:
ORDER NOW!!!
*Not approved for use in mobile homes Under the terms of all manufacturer's warranty and to comply with federal refrigerant handling laws, it is required that the system be checked, started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Failure to comply with this provision will void all factory warranties. Keep a copy of the installation ticket for your records. Please ensure that all supply and return ductwork is properly sized and that a permit is obtained (where required). Always conform with applicable local and state codes. Electrical connections should only be made by a licensed electrical contractor. Unqualified persons should never attempt installation of this or any HVAC system. The Ruud Corporation
A 100-Year Tradition of Reliability More than 100 years ago, Edwin Ruud, a Norwegian mechanical engineer, came to America and developed the first successful automatic water heater. That early success marked the beginning of a tradition of innovation and value that led to the introduction of RUUD heating and air conditioning equipment in the 1950s. Since then, the RUUD Air Conditioning Division has grown into one of North America's largest manufacturers of quality cooling and heating products for residential and light commercial use. Today, RUUD operates two manufacturing facilities in Arkansas and Georgia - both employing highly trained workers and state-of-the-art equipment. These facilities offer more than two million combined square feet of manufacturing, research and development, and office space. Over the years, the product lines have expanded, changed, and improved significantly as new design techniques and better manufacturing technologies have become available. What remains unchanged throughout RUUD's history is their commitment to producing the most reliable, long-lasting, efficient equipment you can buy. HERE IS YOUR WARRANTY COVERAGE! COMPONENT
PARTS √
*Labor is not covered under the terms of the manufacturer's warranty
Under the terms of all manufacturer's warranty and to comply with federal refrigerant handling laws, it is required that the system be checked and started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Please ensure that all supply and return ductwork is properly sized and that the installation is permitted (where required) and conforms with local and state codes. Electrical connections should always be made by a licensed electrical contractor.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The Ruud UHKL series factory matched air handler with earth friendly R-410a refrigerant is the answer to superior heating and cooling performance. For quiet performance, improved humidity control and greater comfort in both heating and cooling this air handler simply out-performs the competition.
An air handler is comprised of an evaporator coil and a blower, which circulates cooled or heated air throughout your home. The Ruud UHKL series air handlers are easy to install, and what's more, they provide years of quiet and dependable operation.
The Ruud High Achiever® models UHKL series air handlers offer homeowners an ECM Motor, which provides improved energy efficiency, quiet operation and energy savings
This newly developed air handler increases energy efficiency resulting in lower energy costs. Thanks to the new General Electric ECM motor, whisper-quiet air delivery is a standard feature. By “ramping up” slowly at startup, this motor completely eliminates the harsh “impact” noises created by full speed startup in ordinary air handlers. This “soft start” significantly reduces fan and motor noise so you can rest easy.
Best of all, this air handler functions automatically - No adjustments or controls to fiddle with. Just set your thermostat and walk away. The air handler senses the optimum operating parameters while you and your family enjoy the performance that only variable speed technology can provide.
Say Goodbye To Drafts with the Ruud air handler. Wintertime drafts are caused by what is referred to as "cold blow," or the cold blast of air upon heating startup. "Cold blow" results from cold air that develops in the duct system while the heat is in an off-cycle. When the air handler heater fan cycles on, this cold air is moved very quickly into your home, resulting in an uncomfortable draft.
This Ruud air handler virtually eliminates cold blow with a "soft start," or a gradual increase in fan speed over the initial 3 to 4 minutes of the on-cycle. This cold air is combined with preheated air from the air handler blower and is delivered at a slower velocity until it reaches full operating temperature. The result? Improved heating comfort and a dramatic reduction of the uncomfortable drafts associated with ordinary air handlers.
|
