The Rheem 95% Achiever furnace is Stimulus Credit certified for a 10% tax credit, up to $200.
That means that your total cost of the furnace and the cost of labor and materials to install it will qualify for this credit.
This credit is subtracted from your total tax due, so it goes right into your pocketbook, courtesy of the government.
95% Two Stage Variable Speed Gas Furnaces
Top Rated Quality - Again
If rugged dependability is high on your list, the dedicated upflow Rheem 95% Achiever Gas Furnace simply can't be beat. Since 2003 the leading consumer group has given Ruud/Rheem the highest rating available for dependability and customer satisfaction. And that hasn't changed for 2011. The same consumer group has once again rated the Rheem brand the most reliable you can buy. Period.
We believe that the Rheem line of quality gas furnaces are the best and most dependable you can buy. We base that on years of experience with these furnaces and feedback from our customers.
They may be a few hundred dollars more than some of the ordinary brands but we think they're worth every penny of the additional cost. Compare the Rheem features and rugged construction to any ordinary furnace and you'll see a visible difference that doesn't require an expert eye. Quite simply, the build quality is apparent the moment you remove the box.
Maximum Comfort is Just The Beginning:
When economical warmth inside your home is important to you, Rheem Achiever 95 high efficiency dedicated upflow furnace is your ticket to comfort. This is one of the most efficient furnaces you can buy for those wind-chilled winter evenings.
In fact, it's 95% efficient which means that 95% of the fuel you pay for is turned into heat. Older furnaces waste as much as 40% of the fuel while only 60% is converted to heat. Best of all, the Rheem 95% efficient furnace can lower your energy consumption by up to 50% when compared to an older, inefficient furnace.
Two-Stage gas Valve - Less is More
The two-stage feature of the Rheem RGRM is like having two furnaces in one. On the coldest days, the furnace operates in the high-stage mode at 100% capacity. But on most days, the furnace comfortably conserves energy by operating in the low-stage mode at just 70% capacity.
A two-stage gas valve adjusts the furnace heating output based on demand. When demand is low the furnace will operate in the lower stage, reducing your fuel bill by about 20%. When the demand is higher the furnace automatically cycles up to the higher stage, providing full capacity and more heat.
The lower operating stage also allows the furnace to heat more evenly with less on/off cycling. Instead of frequent blasts of full capacity heat the furnace will provide just the warmth called for without over-heating your home.
Unbeatable Quiet Performance
The Rheem RGRM Series Furnace features an Electronically Commutated Motor (ECM) that is simply the most advanced, efficient, and reliable technology in its class. This motor provides whisper-quiet air delivery thanks to the variable speed DC operation.
By “ramping up” slowly at startup, this motor completely eliminates the harsh “impact” noises created by full speed startup in ordinary furnaces. This “soft start” significantly reduces fan and motor noise so you and your family can rest easy. In fact, the Rheem RGRM Series gas furnace is so quiet that it produces up to 20 less decibels than a standard furnace. Learn more about this variable speed feature (This links to the variable speed link in the info center)
You simply can't buy a quieter furnace for your home.
Integrated Furnace Controls with Diagnostics
A central "brain" orchestrates the various functions of the Rheem furnace with digital accuracy. Functions like the blower and inducer motor are monitored for proper operation, increasing safety and reliability. This makes servicing the furnace quick and easy too, saving you time and money.
The 95% Rheem 2 stage, variable speed gas furnace provides many of the latest high-technology features without breaking your budget. Features like the corrosion-resistant, aluminized steel tubular heat exchanger with stainless-steel recuperative coil will provide many years of trouble-free service. Plus, the RGRM furnace features a heavy-gauge, reinforced and insulated steel cabinet with a durable and attractive baked-enamel finish.
The Rheem RGRM furnace is easily converted for use with propane with the addition of the field installed propane conversion kit.
The high-efficiency combustion process allows venting with 2 or 3 inch PVC without the need for a traditional chimney flue. And because it can be direct-vented to the outside, fresh air can be used for combustion. This is helpful if the air in the vicinity of the furnace is corrosive, such as around paint or chemical storage, and will protect the heat exchanger from the harmful effects.
The fuel stingy auto-ignition system eliminates the old-fashioned standing pilot for greater ignition dependability without the wasted energy.
Outstanding Features Include:
Furnace operates at 70% capacity for low-heat and 100% capacityfor high-heat.
Upgraded low NOx version, approved for use in California
Heat exchanger is constructed of all stainless steel for maximum
Low profile “34 inch” design is lighter and easier to handle and leaves room for optional accessories.
Left or right side gas, electric, and condensate drainage connections.
Integrated control board manages all operational functions and provides
hookups for humidifier and electronic air cleaner.
An insulated blower compartment, a slow-opening gas valve and a on the market today.
Features a Limited Lifetime Warranty on the primary and secondary heat exchanger and a 10-Year Limited Warranty on all other parts.
Molded permanent filters.
Optional indoor or outdoor combustion air. In addition, combustion air may be piped to either the top or side of the cabinet on all upflow models. A special molded fitting is provided to ease installation.
Dual certified for sealed combustion (2-pipe) or non-direct (1-pipe)applications.
Solid bottom is standard.
Control board diagnostics.
A variety of cooling coils designed to use with the Rheem
So Quiet You May Not Know Its Running
The energy-saving multi-speed, direct drive blower motor is among the quietest and most dependable available. Plus, the slow-opening gas valve and specially designed inducer system make it one of the quietest furnaces on the market today.
The elimination of odd "furnace noises" coming from your basement or closet means you and your family can relax and enjoy the quiet comfort of the Rheem RGRM Series furnace.
Flexible Installation Alternatives
Your installer will appreciate the thoughtful installation flexibility provided by the alternate top or right-hand flue venting. The convenient left or right connection for gas and electric service will make installation a snap.
The RGRM Series furnace can be installed almost anywhere in your home, including the garage, closet, or alcove (upflow applications only. If you need downflow or horizontal please let us know). The return air can be ducted through either side or from the bottom, depending on your particular need.
If you're replacing a similar furnace with this Rheem 95% efficient furnace it will normally require about 4-6 hours to complete the job. Rheem has thought of just about everything to make installation quick and easy.
One RGRM Series dedicated upflow Rheem gas furnace, 95% efficient with 2 stage operation, (Model # RGRM07EMAES) 75,000 Btu’s up to 3.0 ton blower capacity
Horizontal/downflow model is the RGTM series. Choose these models using the selector above
FREE Installation Guides
* Not Approved for use in mobile homes
Under the terms of all manufacturer's warranty and to comply with federal refrigerant handling laws, it is required that the system be checked, started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Failure to comply with this provision will void all factory warranties. Keep a copy of the installation ticket for your records. Please ensure that all supply and return ductwork is properly sized and that a permit is obtained (where required). Always conform with applicable local and state codes. Electrical connections should only be made by a licensed electrical contractor. Unqualified persons should never attempt installation of this or any HVAC system.
The Rheem Corporation
Rheem Manufacturing Company was established in the mid-1920s when brothers Richard and Donald Rheem acquired a galvanizing plant in San Francisco, California. In the 1930's, Rheem began manufacturing water heaters, and by 1936 had coast to coast distribution.
During the 1940s and 1950s, the company increased its product line to include space heating units for homes, oil furnaces and air conditioners.
In 1959, Rheem acquired Ruud Manufacturing Company, a pioneer in the water heating industry with a well-regarded product line and a distribution network throughout North America.
In subsequent years, Rheem entered the heating and air conditioning market and expanded in the late 1960's and 1970's with the rapid growth of the central air conditioning industry.
In 1985, the company acquired Raypak, a leading producer of copper tube boilers used for swimming pool heating and commercial hot water supply and hydronic heating.
A Leading Global Producer of Efficient Heating, Cooling & Water Heating Products
Respected For Reliability, Rheem is an industry leader for total heating, cooling and water heating solutions. In fact, Rheem is the only brand with product offerings covering residential and commercial heating, cooling, conventional and hybrid storage-style water heaters, tankless water heaters, solar water heating systems, hydronic and geothermal systems, indoor air quality accessories, and replacement parts for all categories – making Rheem a one-stop Air and Water comfort solutions provider.
All Rheem products meet or exceed rigorous industry and regulatory standards for quality, reliability, efficiency, and air & water quality.
From design and fabrication to finished product assembly, each phase in the manufacturing process is rigorously monitored and measured to ensure the highest quality , durability and operating excellence.
Rheem products are routinely tested and certified by various government and third-party testing labs to ensure quality standards.
Rheem is headquartered in Atlanta, Georgia. It manufactures in Fort Smith, Arkansas; Montgomery, Alabama; Oxnard, California; Acadia, Florida; and Eagan, Minnesota. All manufacturing facilities are ISO 9001 certified.
Rheem operates a state-of-the-art Parts Distribution center in Randleman, NC and distribution facilities throughout the US and in Hamilton and Mississauga, Ontario, Canada. Rheem also has an international presence in countries such as Australia, Canada, Mexico, Brazil and Singapore.
HERE IS YOUR WARRANTY COVERAGE!
ALL OTHER PARTS
*Labor is not covered under the terms of the manufacturer's warranty
* This unit is not approved for use in mobile homes
Under the terms of all manufacturer's warranty's and to comply with federal refrigerant handling laws (cooling systems only), it is required that the system be checked and started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Please ensure that all supply and return ductwork is properly sized and that proper permits are obtained (where required) and that the installation conforms to local and state codes. Electrical connections should only be made by a licensed electrical contractor.
This handy furnace installation book will provide step-by-step instructions for removing and installing your new furnace and includes full color installation photographs. Save time and money on the installation of your new furnace and learn the "how-to" tricks of the trade to complete your installation safely and properly.
Designed for Gas Furnace Systems The Honeywell programmable single state heat/cool thermostat allows you to custom-tailor the heating and cooling requirements of your home according to your needs. Additionally, studies have shown that a programmable thermostat can save up to 27% in operating costs by optimizing system run times..
Comfort is a matter of temperature and humidity - your furnace controls the temperature and the Aprilaire Model 600 maintains just the right humidity for maximum comfort. It offers all of the performance benefits you expect and it's easier than ever to install because it includes a built-in bypass damper, which means fewer parts to install.
This top rated electronic air cleaner offers amazing performance and value. The Aprilaire 5000 is the most efficient you can buy and offers features that are unsurpassed by any competitive product. Backed by a risk-free, no questions asked, money back guarantee.
Now You Can Take Control Of The Air Quality In Your Home
The GENERALAire media air cleaner is designed for use in a centrally ducted forced air system. This filter will permanently install directly beneath your indoor air handler or furnace within the return air stream. The pleated Air Bear media filter efficiently traps particles as small as 1 micron (1/24,000th of an inch in diameter)
so cleaned air is recirculated into the environment.
Germs, Viruses, and Bacteria Don't Stand a Chance
The Startech Zebra-14 UV Light is our "Best Buy" option when it comes to killing molds, bacteria, viruses and germs in your central air conditioner. This flexible and inexpensive system mounts easily and can connect to a low voltage transformer or simply be plugged in.
Professionals know that the cleanest and most sterile indoor air is only possible with the use of the UV light disinfection system. In addition to the undisputed effectiveness of UV light sterilization with regard to your health, numerous tests have been conducted that show the UV light's ability to clean indoor cooling coils that have been caked with mold and mildew in many air conditioning systems.
Rheem Propane Conversion Kit
Rheem FP Series Propane kit For 90% Plus Efficient Furnaces
The FP-15 Propane Conversion Kit allows conversion of natural gas furnaces to propane gas. The conversion is fast and easy and is completed in the field at the time of installation. This kit is required wherever propane gas will be used with a Rheem 80% efficient furnace.
UL listed 60 amp non-automatic weatherproof disconnect box. Used as a manual means to disconnect power during servicing or repair. Required by code in most areas.
One 6 foot weatherproof and liquid-tight flexible high voltage conduit connector. Used to connect high voltage electrical from the condensing unit or air handler to the disconnect box.
The supply plenum is used on the supply (warm air) side of your furnace or air handler and is the connection point for all of your supply air ducts. It is custom fabricated to fit your new furnace or air handler and is fashioned from 1 1/2" ductboard. Installation and duct connections are fast and easy. No special tools required.
The return plenum is used on the return (cold air) side of your furnace or air handler and is the connection point for all of your return air ducts. It is custom fabricated to fit your new furnace or air handler and is fashioned from 1 1/2" ductboard. Installation and duct connections are fast and easy. No special tools required. (Return plenums are for horizontal installations only. Upflow/downflow installations require a field fabricated platform.)