|
|
|
| Send to friend | |
Heat Pump Technology
A heat pump is a central air conditioning and highly efficient heating system that will “extract” heat from the air in the wintertime for cost effective heating comfort in all but the most severe winter climates.
The system actually “reverse-cycles” in the heating mode and captures heat from outside and “pumps” it into your home.
Top Rated Quality - 7 Years Running
The Rheem/Ruud 15PJL series outdoor heat pump condensing unit offers not only high efficiency, power bill busting operation, but rock-solid, industry-leading quality and unmatched value as well. Need proof? The leading consumer reporting agency has awarded Rheem/Ruud a top quality rating for 7 consecutive years!
Best of all, the high efficiency, 15 seer operation can reduce your cooling costs as much as 45% compared to the average 12 to 15 year old system. The outstanding Heating Seasonal Performance Factors (HSPF) of up to 9.5 can reduce heating costs by up to 65% compared to straight electric heat. We're sure you'll find better ways to spend the savings without handing it over to the power company.
The Environmentally-Friendly R-410a Refrigerant provides additional peace of mind because your new system won't harm the environment and meets the standards set by the federal government.
The cost of service will potentially be reduced in the future as older refrigerants (R-22) are gradually phased out through federally legislated production limitations .
Industry Leading Quality
The quality of this heat pump condenser is apparent the moment you remove the carton. The tough, protective cabinet features electro-statically applied paint that is then baked for long lasting good looks and protection.
Yard debris and severe weather are no match for this solid, durable cabinet, featuring a steel reinforced top for maximum strength.
The 15PJL series heat pump models also feature a special sound-reducing package consisting of a PSC, 4 blade, 8-pole fan motor and discharge line muffler.
The result?
Quiet and smooth operation so you and your neighbors can rest easy.
Rheem/Ruud uses only a heavy gauge copper and aluminum fin coil construction for maximum heat transfer and efficiency. This coil is designed to resist the elements and remain leak free year after year.
Rheem/Ruud installs protective high and low pressure controls to prevent damage to the compressor from pressure extremes. Why settle for less than the absolute highest measure of protection for your new system?
This Rheem/Ruud condenser is designed for ground level or rooftop mounting and is pre-charged with R-410a refrigerant.
* The manufacturer requires that the system be started up and checked by a licensed ac contractor prior to use to validate system warranty and comply with EPA refrigerant handling laws.
Make An Investment In Savings With Efficient performance
The 15PJL series efficient Rheem/Ruud heat pump feature SEER ratings of 15 and an HSPF of up to 9.5, making it an energy efficient choice for home comfort. Compared with a 15 year old system, you could save up to 45% on your energy bill. Here's a savings example for a 3 ton system
Here's a savings example for a 3 ton system:
Annual operating costs for a 15 year old, 8 SEER system--$810.00*
Annual operating costs for a Ruud 15 SEER system---$422.00*
SEER stands for Seasonal Energy Efficiency Ratio. SEER gives an indication of the energy efficiency of the system. The higher the SEER, the more efficient the unit. And, the more efficient the unit, the lower your energy costs.
When you purchase a system with a high SEER, you'll use less energy to cool your house, resulting in lower electric bills. In many cases, these savings are enough to partially or fully offset the cost of the new equipment within a few years.
* Based on .10 cents average per Kilowatt Hour and 1800 annual operating hours
Quiet comfort
The Rheem/Ruud 15PJL series heat pump operates at very low sound levels.
Here's why :
- Enclosed compressor compartment reduces operating noise
- Pedestal Base reduces vibration
- The air-discharge pattern of the grill provides quiet fan operation
- Line muffler reduces noise in heating cycle
- Internal check valve for quiet refrigerant metering
- Non-cycling reversing valve eliminates discharge noise
The last thing you want is to hear a noisy heat pump starting up at night. Rheem/Ruud understands and builds each unit to ensure that your heat pump won't interfere with a good night's sleep.
Durable construction
Materials for all components are factory tested and engineered for long-lasting performance and reliability.
- Durable full metal jacket protects the coil
- Powder coat paint provides durability and long lasting protection
- Unit is finished in a 1000-hour salt spray treatment -- Up to 50% more durable
- The Copeland Scroll Compressor is the most durable ever created
- Low pressure switch provides an unusually high level of protection
- Copper tube with aluminum fin coil construction for improved heat transfer
- Drawn painted base pan for superior corrosion resistance
- Hard start components for reliable startup under varying electric conditions
- Bi-directional filter drier protects the system from contaminants
- Unit is finished in a 1000-hour salt spray treatment -- Up to 50% more durable
Rheem/Ruud has created a specially designed drain pan that provides for more complete condensation removal, preventing the build-up of mold and mildew within the system. And, when you add one of our whole-house air cleaners to your system, you will experience a reduction in dust, pollen and other allergens throughout your entire home resulting in a cleaner, healthier, more comfortable home.
Top Rated Quality From The Leading Consumer Advocacy Group
Don't let the affordable price tag fool you– Buying direct eliminates many layers of overhead from your purchase and Rheem/Ruud is a leader in home heating and cooling systems with over 100 years of experience. In fact, the Rheem/Ruud Brand has been awarded a top quality rating for durability by the leading consumer advocacy group for the last 7 years.
Quality claims are a dime a dozen but Rheem/Ruud's dependability is documented and reflects a quality commitment rarely matched in the industry today.
* The manufacturer requires that the system be started up and checked by a licensed ac contractor prior to use to validate system warranty and comply with EPA refrigerant handling laws.
Plus, to save costs at installation time, the heat pump condenser is pre-charged with R-410a refrigerant for up to 15-20 feet of tubing.
ORDER NOW!
- One outdoor Rheem/Ruud heat pump air conditioning unit Model #15PJL30A01 R-410a refrigerant.
- One factory matched high efficiency indoor air handler Model#RHLL-HM3617JA
- All sizes are TAX CREDIT QUALIFIED…more
- FREE Shipping ... Continental United States
- FREE Installation Guides ... Provided with all equipment purchases
This product features a dramatic discount from our everyday price with our special "Google Shopping" pricing. If you are on this page, you found us through a Google shopping link where we offer our very lowest pricing. Because of this low price commitment and because you found us through a Google Shopping link, you'll get substantially reduced pricing for all available products on our site, even if the price you see is higher. Call us toll-free at 1-866-862-8922.
View all of our Google Shopping products featuring "best of the web" pricing.
*This unit is not approved for mobile homes
Under the terms of all manufacturer's warranty and to comply with federal refrigerant handling laws, it is required that the system be checked, started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Failure to comply with this provision will void all factory warranties. Keep a copy of the installation ticket for your records. Please ensure that all supply and return ductwork is properly sized and that a permit is obtained (where required). Always conform with applicable local and state codes. Electrical connections should only be made by a licensed electrical contractor. Unqualified persons should never attempt installation of this or any HVAC system.
The Ruud Corporation
A 100-Year Tradition of Reliability
More than 100 years ago, Edwin Ruud, a Norwegian mechanical engineer, came to America and developed the first successful automatic water heater. That early success marked the beginning of a tradition of innovation and value that led to the introduction of RUUD heating and air conditioning equipment in the 1950s.
Since then, the RUUD Air Conditioning Division has grown into one of North America's largest manufacturers of quality cooling and heating products for residential and light commercial use.
Today, RUUD operates two manufacturing facilities in Arkansas and Georgia - both employing highly trained workers and state-of-the-art equipment. These facilities offer more than two million combined square feet of manufacturing, research and development, and office space. Over the years, the product lines have expanded, changed, and improved significantly as new design techniques and better manufacturing technologies have become available.
What remains unchanged throughout RUUD's history is their commitment to producing the most reliable, long-lasting, efficient equipment you can buy.
HERE IS YOUR WARRANTY COVERAGE!
COMPONENT
- COMPRESSOR
- ALL OTHER PARTS
WARRANTY √
- 10 Years
- 10 years
* Labor is not covered under the terms of the manufacturer's warranty
*Online registration required for 10 year warranty
Under the terms of all manufacturer's warranty and to comply with federal refrigerant handling laws, it is required that the system be checked and started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Please ensure that all supply and return ductwork is properly sized and that the installation is permitted (where required) and conforms with local and state codes. Electrical connections should always be made by a licensed electrical contractor.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
The Ruud RHLL
The RHLL series factory matched Rheem/Ruud air handler with earth friendly R-410a refrigerant is the answer to superior heating and cooling performance. For quiet performance, improved humidity control and greater comfort in both heating and cooling this air handler simply out-performs the competition.
An air handler is comprised of an evaporator coil and a blower, which circulates cooled or heated air throughout your home. The Rheem/Ruud RHLL series air handlers are easy to install, and what's more, they provide years of quiet and dependable operation.
Durable Construction
Standard Ruud air handler quality features include:
- Sturdy construction with 1.0" of reinforced foil-faced insulation
- Rugged steel wall cabinet construction for added strength
- Copper tube and aluminum fin coils
- Molded polymer corrosion resistant drain pan
- Transformer and blower time delay for maximum efficiency
Improved air quality
The air handler that is matched with this system is not only among the quietest made but can significantly reduce mold and mildew build-up within the system.
Rheem/Ruud has developed a specially designed drain pan that provides for more complete condensation removal, preventing the build-up of standing water.
And, when you add one of our whole-house air cleaners to your system, you will experience a reduction in dust, pollen and other allergens throughout your entire home resulting in a cleaner, healthier, more comfortable home.
Flexible installation Design
The Rheem/Ruud air handler is versatile and can be installed as an upflow (ductwork above the air handler), downflow (ductwork under the air handler), and horizontally (air handler in an attic, crawlspace, or basement).
If you are capable, you can do most of the installation yourself and then set up a service call for a professional to come and open the refrigeration system and check the charge.
Any qualified air conditioning technician can easily install this system in your home or office. It will normally require about 5-8 hours to replace an existing, similar type system.
Indoor Air Handler Features
- Fully insulated with 1.0" foil facing - Provides quieter operation
- Rugged steel wall cabinet insulation for added strength
- Features GE's new X-13 (ECM) motor which provides enhanced SEER performance with most Ruud outdoor unit
- Built-in evaporator coil with horizontal and vertical thermoplastic drain pans - Allows multi position installation
- Blower operation designed for soft start and stop - More efficient operation eliminating cold blast of air on heating startup
- Simple and uncomplicated design and application - Requires no special controls or installation procedures
- Durable, attractive cabinet resists corrosion 50% better
- Circuit Board - Combines commonly used connections in one area
- Ease of service - Plug in wire connections and built-in filter rack
- TXV metering device provides precise and efficient refrigerant control
- 5 field selectable air flow settings - Can be adjusted to optimize system air delivery for each individual mode of operation
- Power supply entry at top - Ease of installation
- Rust resistant nickel chromium heating elements - Increased durability and longer life
| ||
|