America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- 2.5 ton - best for spaces between 1200 -1500 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Best if you already have a self-contained outdoor unit in place now or if you have no place for an indoor unit (air handler/furnace)
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
ACiQ 2.5 Ton Package Unit AC With 60000 BTU 81% AFUE Gas Furnace | 13.4 SEER2 Downflow / Horizontal Airflow | R454B
- Package Unit: PGB430060K000B
- Optional Square To Round Adapter
AC Size Calculator | Get BTU’s and Tonnage – Free and Easy!
Welcome! START HERE:
Use the sizing calculator below to calculate your required system size.
Follow these easy steps:
- 2.5 ton - best for spaces between 1200 -1500 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Best if you already have a self-contained outdoor unit in place now or if you have no place for an indoor unit (air handler/furnace)
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
ACiQ 2.5 Ton Package Unit AC With 60000 BTU 81% AFUE Gas Furnace | 13.4 SEER2 Downflow / Horizontal Airflow | R454B
Model Number
PGB430060K000B
Dimensions
47" W x 42-15/16" D x 43" H
Documents
Warranty
Heat Exchanger: 20 years | Parts: 10 years
AHRI Number
215565360
ACiQ PGB430060K000B 2.5 Ton Gas Pack – 60,000 BTU, 13.4 SEER2, R454B
Smart comfort in a single package—built for performance, designed for simplicity.
The ACiQ PGB430060K000B is a 2.5-ton packaged air conditioner and gas furnace system that delivers dependable heating and cooling in one streamlined unit. With 13.4 SEER2 cooling efficiency and 60,000 BTU of gas heating power, this model is ideal for homeowners who want reliable comfort without the complexity of separate systems. It’s pre-charged with R454B refrigerant, a low-GWP alternative that meets 2025 environmental standards.
This unit is engineered for fast installation and long-term durability, featuring a rust-resistant composite base, heavy-duty steel cabinet, and convertible airflow for rooftop or ground-level setups. Whether you're upgrading or replacing, the PGB430060K000B offers a quiet, energy-efficient solution that’s ready to go.
Features & Benefits:
- 2.5 Ton Cooling / 60,000 BTU Heating – Ideal for mid-sized homes needing year-round comfort.
- 13.4 SEER2 / 11.05 EER2 – Meets modern energy efficiency standards.
- R454B Refrigerant – Low global warming potential and future-ready.
- ECM Blower Motor – Quiet, efficient airflow with enhanced humidity control.
- Direct Spark Ignition – Reliable gas ignition for consistent heating.
- Convertible Duct Design – Supports both horizontal and downflow installations.
- Durable Cabinet – Zinc-coated steel and composite base resist rust and corrosion.
- Quiet Operation – Sound levels as low as 73 dBA.
- Warranty Coverage:
- 20-year heat exchanger limited warranty (lifetime with registration)
- 10-year parts limited warranty (with registration)
- 3-year no-hassle replacement warranty (original owner)
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST