Condenser
(1) Goodman 16 SEER 4.0 Ton Two Stage Straight Cool Condenser
Model Number
GSXC160481
Dimensions
35-3/4" W x 35-3/4" D x 37" H
Air Handler
(1) 4.0 Ton Goodman AVPTC Variable Speed Air Handler
Model Number
AVPTC49D14A
Dimensions
24-1/2" W x 23-5/16" D x 58" H
Heaters
Choice of (1) HKSX Electric Strip Heater
Model Number
5kW | 8kW | 10kW | 15kW | 20kW
Dimensions
Varies
Goodman GSXC16 High-Efficiency Air Conditioner Features
Standard
- High-efficiency two-stage scroll compressor
- Two-speed PSC condenser fan motor
- Integrated communicating ComfortBridge™ Technology
- Commissioning and diagnostics via indoor board Blue-tooth with the CoolCloud™ phone and tablet application
- Factory-installed filter drier
- Factory-installed transformer
- Factory-installed high and low-pressure switches
- High-density foam compressor sound blanket
- Copeland® ComfortAlert™ built in diagnostics
- Fully charged for 15’ of tubing length
- Factory-installed sensors monitoring coil and ambient temperature
- Contactor with lug connection
- In communicating mode, only two low voltage wires to the outdoor unit are required
- AHRI Certified - ETL Listed
- Ground lug connection
- Color-coded terminal strip for non-communicating set-up
- Copper tube & enhanced aluminum fin coil
- Customized control algorithms
Cabinet
- Heavy-gauge galvanized steel cabinet and louvered coil guards
- Service valves with sweat connections and easy-access gauge ports
- Engineered sound control top design
- Wire fan discharge grille
- Baked-on powder-paint finish with 500-hour salt-spray approval
- Single-panel access to controls with space for field-installed accessories
- Service port and controls are accessible while unit is operating
- Compact footprint
- Rust-resistant screws
- When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
Goodman AVPTC Multi-Position, Variable-Speed ECM-Based Air Handler with Internal TXV Features
- Internal factory-installed thermal expansion valves for cooling and heat pump applications
- Variable-speed ECM blower motor
- Integrated communicating ComfortBridge™ Technology
- Commissioning and diagnostics via on board Bluetooth with the CoolCloud phone and tablet application
- Auto configuration of the airflow and tonnage in communicating mode
- Provides constant CFM over a wide range of static pressure conditions independent of duct system
- CFM indicator
- Fault recall of six most recent faults
- Provides adjustable low CFM for efficient fan-only operation
- Improved humidity and comfort control
- Built-in compatibility with multi-stage heat pump and cooling applications
- All-aluminum evaporator coil
- AHRI certified; ETL listed
- Rigid SmartFrame™ cabinet
- Cabinet air leakage less than 2.0% at 1.0 inch H2O when tested in accordance with ASHRAE standard 193
- Cabinet air leakage less than 1.4% at 0.5 inch H2O when tested in accordance with ASHRAE standard 193
- Horizontal or vertical configuration capabilities
- 21" depth for easier attic access
- DecaBDE-free thermoplastic drain pan with secondary drain connections
- Screw-less sides and back helps to reduce condensation when installed in humid locations
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- Galvanized, leather grain-embossed finish
- Glue-less cabinet insulation retention
- Tool-less filter access
- Field Installed 3 kW – 25 kW electric heater kits available
COMPONENT
- COMPRESSOR LIMITED WARRANTY
- COMPRESSOR REPLACEMENT
- PARTS
WARRANTY
- Limited Lifetime
- 10 years
- 10 years
Note: If the unit is properly registered online within 60 days after the installation date, the warranty lasts for as long as the original registered owner or his or her spouse (“registered owner”) own and reside in the home in which the unit was originally installed for a period up to 10 YEARS for parts. Otherwise it will be a period up to 5 YEARS.
































