You have no items in your shopping cart.
Condenser
(1) Direct Comfort 1.5 Ton 14 SEER GSX Straight Cool Condenser
Model Number
DC-GSX140181L
Dimensions
26" W x 26" D x 27-1/2" H
Gas Furnace
(1) Direct Comfort 60K BTU 80% AFUE GMS8 Multi-Position, Multi-Speed Gas Furnace 1200 CFM
Model Number
DC-GMS80603A
Dimensions
14" W x 28" D x 33-3/8" H
Indoor Evaporator Coil
(1) Direct Comfort 3.0 Ton CAPF Indoor Evaporator Coil
Model Number
DC-CAPF3636A6
Dimensions
17-1/2" W x 21" D x 22" H
TXV Valve
(1) Goodman 1.5 to 2.0 Ton Goodman TXV Kit
Model Number
TXV2N4
Dimensions
5-3/4" W x 8-1/4" D x 3-1/4" H
Direct Comfort GSX14 Energy-Efficient Air Conditioner Features
Standard
- Energy-efficient compressor
- Single-speed condenser fan motor
- Factory-installed filter drier
- Copper tube/aluminum fin coil
- Service valves with sweat connections and easy-access gauge ports
- Contactor with lug connection
- Ground lug connection
- AHRI Certified; ETL Listed
Cabinet
- Heavy-gauge galvanized-steel cabinet with a louvered sound control top
- Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
- Wire fan discharge grille
- Steel louver coil guard
- Single-panel access to controls with space provided for field-installed accessories
- When properly anchored, meets the 2010 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
Direct Comfort GMS8 Multi-Position, Multi-Speed Gas Furnace 80% AFUE Features
Standard
- Dual-diameter tubular heat exchanger
- Single-stage combination redundant gas valve
- Norton hot surface mini-igniter
- Quiet multi-speed direct-drive circulator blower motor
- Furnace control board with self-diagnostics and low-voltage terminal block
- Quiet single-speed, induced-draft blower
- Certain models available with low NOx emissions
Cabinet
- Foil-faced insulation lines the heat exchanger compartment
- Factory sealed to achieve 2% or less leakage rate at 1.0” water gauge external duct static pressure
- Designed for multi-position installation: GMS8 and GHS8: upflow, horizontal left or right GDS8: dedicated downflow
- Coil and furnace fit flush for most installations
Direct Comfort CAPF Indoor Evaporator Horizontal Coil Product Features
- All-Aluminum evaporator coil
- Optimized for use with R-410A refrigerant
- Some models suitable for use with R-410A or R-22 refrigerant
- CAPT models feature factory-installed thermal expansion valves for cooling and heat pump applications
- Check flowrator for cooling and heat pump applications
- Vertical and horizontal models available
- 21" depth for easier attic access
- Split seam front for easy access
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- Galvanized, leather grain-embossed finish
- Rust resistant, thermoplastic drain pans featuring a low water-retention design
- DecaBDE-free thermoplastic drain pan with secondary drain connections
- UV-resistant drain pan
- AHRI certified; ETL listed
COMPONENT
- HEAT EXCHANGER
- UNIT REPLACEMENT
- PARTS
WARRANTY
- Limted Lifetime
- Limited 10 years
- 10 years
Direct Comfort products and systems are covered by outstanding limited warranties. Be certain to review the standard and registered limited warranty coverage associated with the Direct Comfort product that you select for your home. Note: You do not need to register for the standard warranty coverage, but you will get additional warranty protection by registering the model and serial number of your product at www.directcomforthvac.com within 60 days of installation.* In both cases, installation must be performed by a local, independent contractor that meets the local, state and federal requirements for the installation of HVAC equipment.
Download the complete warranty for this product here.
*Registration is not required in California or Quebec to get the additional protection.