Mitsubishi 20000 BTU 2 Zone Ductless Heat Pump Mini Split AC System | Condenser MXZ-2C20NA4-U1

MSZ-GS Series Wall-Mounted Air Handler Features

• Slim wall-mounted indoor units provide zone comfort control
• The outdoor unit powers the indoor unit, and should a power outage occur, the system is automatically restarted when power returns
• Multiple fan speed options: Quiet, Low, Medium, High, Super-high, Auto
• Multiple control options available:
  • - Hand-held Remote Controller (provided with unit)
  • - kumo cloud® smart device app for remote access
  • - Third-party interface options- Wired or wireless controllers
• Hot-Start Technology: no cold air rush at equipment startup or when restarting after Defrost Cycle
• Quiet operation
• Smart Set: recalls a preferred preset temperature setting at the touch of a button

Mitsubishi SVZ-KP Series Air Handler Overview

SVZ-KP Connection Rules

• Up to 2 SVZ-KP’s may be connected to this system*.
• When 2 SVZ-KP’s are connected, no additional indoor units can be used*.
• When 1 SVZ-KP is connected, additional indoor units can be connected.
• When 1 SVZ-KP is connected, total connected capacity must not exceed 130%.

*No limitation to the number of units connected when the SPTB1 accessory is used, total connected capacity must not exceed 130%.

Features:

• Multi-position air handling unit
• Multi-Position installation without any additional kits
• Quiet operation
• Selectable external static pressure settings with capabilities up to 0.80 In. W.G.
• Auto fan speed control: Low, Medium, High
• Indoor unit powered from outdoor unit using A-Control (Optional)
• Auto restart following a power outage

Mitsubishi SLZ-KF Series Ceiling Cassette Features

• Four-way 2'x2' ceiling-cassette indoor unit for ceiling recessed applications
• Built-in drain mechanism for condensate removal; lifts to 19-11/16"
• Wide air-flow pattern for better air distribution
• Design features ventilation air intake knockout
• Long-life air filter included with indoor unit
• Indoor unit powered from outdoor unit using A-Control
• Choice of fan speed: Low, Medium, High
• Automatic restart following a power outage

SEZ-KD Series Horizontal-Ducted Air Handler Features

• Horizontal-ducted indoor unit for concealed applications
• Ultra thin body: 7-7/8" high
• Built-in drain mechanism for condensate removal; lifts to 21-11/16"
• Air filter is included with indoor unit
• Quiet operation - as low as 23 dBA
• Indoor unit powered from outdoor unit using A-Control
• AUTO fan speed control
• Automatic restart following a power outage

MLZ-KP Series One Way (Recessed) Ceiling Indoor Unit Features

• Available sizes: 9, 12, 18 kBtu/h
• Fits between 16” joists spacing
• Stylish, square design panel
• Built-in condensate lift mechanism (19.6”)
• Serviceable from the bottom (electrical and flare connections)
• Adjustable fan speeds and vane directions
• Washable antibacterial and deodorizing filter
• Multiple control options available:
  • - Handheld Remote Controller (provided with unit)
  • - kumo cloud® smart device app for remote access
  • - Third-party interface options
  • - Wired or wireless controllers
• Pocket inside the access panel for kumo cloud® Wireless Interface

MFZ-KJ Floor Mounted Indoor Units Overview

Key Features

• HEALTHIER INDOOR AIR - Sophisticated multi-part filtration systems reduce contaminants such as allergens, viruses and bacteria from the air.
• PERFORMANCE IN COLD CLIMATES - Hyper-Heating INVERTER^® technology provides exceptional performance down to -13° F outdoor ambient, with 100% heating capacity at 5° F outdoor ambient.
• WHISPER-QUIET OPERATION - Both the indoor and outdoor units are extremely quiet. Indoor units operate as low as 19 dB(A) - that's quieter than a whisper.
• HIGHLY-EFFICIENT INVERTER TECHNOLOGY - Traditional systems operate on an inefficient cycle of 100% on or 100% off. With Mitsubishi Electric’s INVERTER-driven compressor technology, our systems constantly measure conditions and then adjust compressor and fan speed up or down to maintain the desired temperature.
• EASY-ACCESS, WASHABLE FILTERS - Front panels make it easy to access the filters. Instead of wasting money on new filters several times a year, Mitsubishi Electric indoor units use easy-to-clean, washable filters. You’ll never get caught without a filter again.
• HOT-START TECHNOLOGY - With Hot-Start technology and multi-vane airflow, you get hot air right away and rapid heating of the room.
• REMOTE CONTROL - Wireless controllers are available to program the system around your comfort level and your life's busy schedule. Whether you’re gone for the day or on an extended vacation, you can control your system from just about any smartphone or tablet. You’ll never again have to return to a house that’s freezing cold or blazing hot.

CONTROLLER FEATURES INCLUDE:

• MODE: HEAT, COOL, AUTO, and DRY
• FAN: Adjusts fan speed
• STOP/START: A 12-hour ON/OFF timer
• ECONO COOL: Energy efficient cooling option
• VANE: Sets horizontal vane position
• TIME: Power off timer and clock adjustment
• SMART SET: Programs multiple settings into one quick-press feature. Programs heating set back

MHK2 Overview