Goodman 3 Ton 16.7 SEER2 Dual Fuel Hybrid Heat Pump System – Two Stage Heat Pump & Two Stage Variable Speed 80000 BTU Gas Furnace, 96% AFUE, Upflow, R32
-
Condenser
1 × Goodman 3 Ton 17.2 SEER2 R32 High-Efficiency Two Stage Heat Pump Condenser (GLZT7CA3610)
$4,825.07$4,825.07 -
Gas Furnace
1 × Goodman 80000 BTU Gas Furnace - 2 Stage 96% Efficient Variable Speed ECM Upflow / Horizontal | R32 (GRVT960804CN)
$2,954.00$2,954.00 -
Evaporator Coil
1 × Goodman 3 Ton R32 Evaporator Coil With Internal TXV Upflow / Downflow (CAPTA3626C3)
$924.37$924.37
Heat pumps lose efficiency below ~25°F. A heat kit adds electric backup for the coldest days. Most homes this size choose 8–10 kW.

We highly recommend this protection. Covers the technician’s bill if a repair is ever needed — parts are already covered separately.
-
0% Interest — for orders over $3000
-
No Credit Needed — Offered at checkout
-
7 night Luxury Resort Stay — For orders over $3000
What's Included
What's Included
Goodman 3 Ton 17.2 SEERS R32 High-Efficiency Two Stage Heat Pump Condenser
Model Number
GLZT7CA3610
Dimensions
35-1/2" W x 35-1/2" D x 39-1/2" H
Documents
Limited Warranty
Parts: 10 years
Goodman 96% AFUE 80000 BTU Variable Speed ECM 2 Stage Gas Furnace Upflow / Horizontal | R32
Model Number
GRVT960804CN
Dimensions
21" W x 29" D x 34-1/2" H
Documents
Limited Warranty
Parts: 10 years | Heat Exchanger: Limited Lifetime
Goodman 3 Ton R32 Evaporator Coil With Internal TXV Upflow / Downflow
Model Number
CAPTA3626C3
Dimensions
21" W x 21" D x 26" H
Documents
Warranty
Parts: 10 years
AHRI Number
217170000
Outdoor Unit Details
Outdoor Unit Details
GLZT7C Overview
Standard Features
- Two-Stage Copeland® UltraTech scroll compressor
- High-density foam compressor sound blanket
- Integrated communicating ComfortBridge™ technology
- Commissioning and diagnostics via indoor board Bluetooth with the CoolCloud™ phone and tablet application
- Goodman® GTST Connected Thermostat Compatibility
- ComfortAlert™ built in diagnostics
- Copper tube/enhanced aluminum fin coil - 5mm on 2.0-3.0T
- Copper tube/enhanced aluminum fin coil - 7mm on 4.0-5.0 T
- Efficient, two-speed ECM condenser fan motor
- Simple low-voltage wiring to outdoor unit in communicating mode
- Diagnostic indicator lights and storage of six fault codes
- Color-coded terminal strip for non-communicating set-up
- High- and low-pressure switches
- Time-delay technology with short-cycle protection to ensure quiet, reliable defrost
- Factory-installed bi-flow liquid-line filter drier
- Factory-installed suction-line accumulator
- Factory-installed compressor crankcase heater
- Factory-installed high-capacity muffler
- Factory-installed coil and ambient temperature sensors
- AHRI Certified; ETL Listed
Cabinet Features
- Grille-style sound control top design
- Custom Nickel Gray powder-paint finish
- 500-hour salt-spray tested
- Wire fan discharge grille
- Steel louver coil guard
- Single panel access to controls with space provided for field-installed accessories
- Sweat connection service valves with easy access to gauge ports
- When properly anchored, meets the 2024 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
Indoor Unit Details
Indoor Unit Details
GRVT96 Overview
Standard Features
- Integrated communicating ComfortBridge™ Technology
- Commissioning and diagnostics via on board Bluetooth with the CoolCloud phone and tablet application
- Heavy-duty aluminized-steel tubular heat exchanger
- Stainless-steel secondary heat exchanger
- Two-stage gas valve provides quiet, economical heating
- Durable Silicon Nitride igniter
- Quiet two-speed induced draft blower
- Compatible with any single-stage thermostat
- Self-diagnostic control board with constant memory fault code history output to a triple 7-segment display
- Color-coded low-voltage terminals with provisions for electronic air cleaner
- Efficient and quiet variable-speed airflow system gently ramps up or down according to heating or cooling demand
- Multiple continuous fan speed options offer quiet air circulation
- Auto-Comfort and enhanced dehumidification modes available
- All models comply with California 40 ng/J Low NOx emissions standard
- Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD) on or after October 1, 2019.
Cabinet Features
- Designed for multi-position installation — upflow, horizontal left or right
- Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
- Easy to install top venting with optional side venting
- Convenient left or right connection for gas and electrical service
- Cabinet air leakage (QLeak) ≤ 2%
- Heavy-gauge steel cabinet with durable baked-enamel finish
- Fully insulated heat exchanger and blower section
- Airtight solid bottom or side-return with easy-cut tabs for effortless removal in bottom air-inlet applications
Goodman CAPTA3626C3 Cased Coil – 3 Ton, 21" Cabinet
Reliable performance with wider airflow handling
The Goodman CAPTA3626C3 is designed for 3-ton systems and comes in a 21-inch cabinet for improved airflow handling. With its robust build, it ensures long-term comfort and durability.
Featuring an all-aluminum coil and factory-installed TXV, it offers efficiency and system reliability.
Features & Benefits
- 3 Ton nominal capacity
- 21" cabinet width for stronger airflow
- All-aluminum coil for dependable performance
- Factory-installed TXV included
- Compatible with Goodman AC and heat pump units
Shipping & Returns
Shipping & Returns
Fast nationwide fulfillment from the USA. Free shipping on qualifying orders over $1,500. See our shipping and returns policy for full details.