America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Heat pumps are all electric and good for mild and cold climates.
- Commercial mini splits are designed for higher demand, non-residential commercial applications.
Mitsubishi 24000 BTU Single Zone Mini Split Heat Pump AC System | Up To 22.6 SEER2 | Light Commercial | Choose Your Indoor Unit | R454B
- Outdoor Unit: PUZ-AH24NL
- Indoor Unit: Choice of 1 Indoor Unit
- Controller: Included With Indoor Unit
Mini Split Sizing BTU Calculator
Use this Free & Easy Mini Split BTU Calculator to Select the Right Size Mini Split AC or Heat Pump for your Home.
When using a mini split sizing calculator for rooms below a conditioned space, apply an additional .7 factor to your final Btu outcome.
For example, if your Btu requirement via this calculator is 18,000 Btu's: 18,000 Btu's x .7 factor = 12,600 Btu's required. When in doubt, it is okay to go up a size or two. Unlike standard non-variable systems, The mini split inverter technology allows the system to adjust to the actual room requirements in both heating and cooling.
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Heat pumps are all electric and good for mild and cold climates.
- Commercial mini splits are designed for higher demand, non-residential commercial applications.
As low as $6,906.03 was $7,315.00
Mitsubishi 24000 BTU Mini Split Heat Pump AC Outdoor Unit | Light Commercial | Single Zone Inverter
Model Number
PUZ-AH24NL
Dimensions
37-13/32" W x 14" D x 37-1/8" H
Documents
Warranty
Parts: 10 years | Compressor: 7 years
Mitsubishi 24000 BTU Mini Split AC Horizontal Ducted Indoor Unit | Light Commercial
Model Number
PEAD-AA24NL
Dimensions
43-5/16" W x 28-7/8" D x 9-7/8" H
Documents
Warranty
Parts: 10 years
Mitsubishi 24000 BTU Mini Split AC Wall Mount Indoor Unit | Light Commercial | R454B
Model Number
PKA-AK24NL
Dimensions
46-1/16" W x 11-5/8" D x 14-3/8" H
Documents
Warranty
Parts: 10 years
Mitsubishi 24000 BTU Mini Split AC Ceiling Cassette Indoor Unit | Light Commercial
Model Number
PLA-AE24NL
Dimensions
33-1/16" W x 33-1/16" D x 11-3/4" H
Documents
Warranty
Parts: 10 years
Mitsubishi 24000 BTU Mini Split AC Air Handler Indoor Unit | Light Commercial Multi-Positional
Model Number
PVA-AA24NL
Dimensions
21" W x 21-5/8" D x 54-1/4" H
Documents
Warranty
Parts: 10 years
MHK2 Kit
Mitsubishi Wireless Remote Controller
Model Number
MRCH2
Dimensions
4-5/64" W x 1-1/16" D x 4-5/64" H
Documents
Warranty
Parts: 5 years
Mitsubishi Wireless Receiver
Model Number
MIFH2
Dimensions
1-3/4" W x 39/64" D x 3-3/32" H
Documents
Warranty
Parts: 5 years
Mitsubishi Cable For Wireless Receiver
Model Number
MRC2
Length
39-23/64"
Documents
Warranty
Parts: 5 years
PUZ-AH24NL Overview
Features
- Blue Fin Coating: An anti-corrosion treatment applied to the aluminum fins of the heat exchanger of the outdoor unit to protect against corrosion caused by salt, sulfur, and other airborne contaminants, especially in coastal and industrial areas.
- Continuous operation: 24-hour continuous operation (cooling mode)
- Fast restart
- High pressure protection
- INVERTER-driven compressor: An inverter-driven compressor generates the precise capacity needed to maintain a temperature set point.
- Low ambient cooling: Low ambient cooling down to -40°F providing 100% capacity (with wind baffles)
- Pre-charged refrigerant: 12k -30k BTU/h come pre-charged for ease of installation. 24,000 – 30,000 BTU/h are pre-charged to maximum line length of 225 feet. 12,000 – 18,000 BTU/h are pre-charged for up to 165 feet of line length. For units with a capacity of 36,000 BTU/h and above, additional refrigerant charges will be required.
- Seacoast protection: Seacoast Protection, made standard in the 2022 production, features a robust anti-corrosion system with phosphate and acrylicenamel coated external panels, epoxy resin-coated fan motor support and separator assembly valve beds, and Blue Fin treatment for the heat exchanger coil. These components are rated for 2,000 hours of durability under ASTM B117 testing standards, ensuring longevity in corrosive coastal environments.
- Superior energy and operational efficiency
- Also known as "Mr. Slim" - Mitsubishi's popular nickname for its ductless mini split line
PEAD-AA24NL Overview
The Mitusishi Mid Static intelli-AIR ducted indoor units are designed to keep your home or business comfortable all year round. Whether you have a small house or a larger space like an office, daycare, shop, or restaurant, these hoirzontal ducted indoor unit offer the right size and power to meet your needs.
They work by moving air through hidden ducts to heat or cool multiple rooms at once—perfect for open areas or spaces with long duct runs. The PEAD-AA24NL can be installed out of sight in the attic, ceiling, or under the floor, and they run so quietly you’ll barely notice they’re there.
As a smart, energy-saving heat pump, the Mid Static intelli-AIR system adjusts its power to use only the energy needed to maintain your ideal indoor temperature—helping you stay comfortable while saving on energy bills.
Features
- Built-in condensate lift mechanism (up to 27-9/16”)
- Wide ranging external static pressure (0.14-0.60 in. WG)
- Unobtrusive ceiling-concealed design for short-run ductwork
- Multiple control options including: comfort app, third-party interfaces and both wired and wireless controllers
- Auto fan speed mode
- Optional FB Series filter boxes for easy access and service
PKA-AK24NL Overview
This ductless wall-mounted unit features a modern, compact design that’s perfect for smaller commercial spaces like daycare centers, classrooms, churches, and small offices. It’s available as a single-zone or multi-zone system, giving you flexibility based on your needs.
With the ability to connect to outdoor units over long distances, it offers more installation options. Plus, the Dual Barrier Coating on key components helps keep the unit clean and running efficiently over time—reducing maintenance and improving performance.
Features
- Auto fan speed mode: Automatic adjustment of fan speed
- Ideal PKA spaces: Ideal for spaces such as server rooms, daycare centers, classrooms, churches, small offices, and more
- Light commercial: Units with this icon are suitable for light commercial applications such as small offices, restaurants, and retail.
- Multiple control options, including the comfort app for remote access, third-party interfaces, and both wired and wireless controllers
- Simple installation
- Single-zone: One outdoor unit connects to one indoor unit to control the comfort in a single space.
- Sleek, compact design
- Up and down swing-mode: An indoor unit with this capability can move air up and down throughout the room like an oscillating fan using the horizontal vanes.
- Vane settings: Vane setting for air flow direction control
PLA-AE24NL Overview
This ductless ceiling unit is designed to fit neatly into your ceiling while delivering powerful, even airflow. With 72 unique airflow patterns, you can choose to use 2, 3, or all 4 vanes to direct air exactly where it’s needed—perfect for rooms with different layouts.
It also includes the advanced 3D i-see Sensor®, which scans the room to detect people and temperature differences. It automatically adjusts airflow and temperature for maximum comfort and energy savings—especially when the room is empty.
Features
- 3D i-see Sensor®: The advanced sensor scans each room to produce a complete thermal profile that includes heat signatures based upon size, temperature and movement, then adjusts temperature and airflow based on user preference, and saves energy according to room occupancy.
- Available Knockouts: Knockouts for outside-air intake and branch-duct run
- Built-in condensate lift mechanism
- Easy-to-clean filter: Easy-to-clean, washable filter (optional high-efficiency filter available - requires multi-function casement)
- Filter indicator signal
- Ideal PLA spaces: Ideal for retail shops, classrooms, office spaces, conference centers, building lobbies, and more
- Individual vane settings: Individual vane settings for direct/indirect airflow control or variable airflow patterns
- Light commercial: Units with this icon are suitable for light commercial applications such as small offices, restaurants, and retail.
- Multiple control options, including the comfort app for remote access, thirdparty interfaces, and both wired and wireless controllers
- PLA Airflow settings: Airflow settings for high and low ceiling applications
- Space-efficient ductless installation
- Up and down swing-mode: An indoor unit with this capability can move air up and down throughout the room like an oscillating fan using the horizontal vanes.
PVA-AA24NL Overview
The PVA Multi-Position Air Handler is a great choice for large homes, multi-family buildings, and light commercial spaces. It’s built to last, with a top-quality, corrosion-resistant black ZAM finish and a built-in humidifier for added comfort.
This whisper-quiet unit is perfect for new construction, system replacements, or upgrades. It can work with your existing backup heating system or help you switch to a more eco-friendly, all-electric heating and cooling solution.
Features
- Ducted air handler: Ducted air handler provides a solution to cool and heat large zones
- Enclosed ECM motor: Highly efficient totally enclosed ECM motor
- Fiberglass free insulation: 1 inch R4.2 fiberglass free insulation reduces condensation and boosts efficiency
- Light commercial: Units with this icon are suitable for light commercial applications such as small offices, restaurants, and retail.
- Multi-position installation: Multi-position installation: horizontal (left or right), vertical (up or down). For downflow configurations, the CMA-1 is recommended for proper management of condensate to prevent water blow-off in certain conditions
- Multiple control options, including the comfort app for remote access, third-party interfaces, and both wired and wireless controllers
- Optional electric heat kit: Optional electric heat kit for additional heat capacity
- Optional humidifier control and ERV control
- Positive pressure cabinet: Positive pressure cabinet with air leakage of less than 1.0% at 1.0 in.WG
- Selectable external static pressure: Selectable external static pressure: 0.30, 0.50 and 0.80 in.WG with 3 fan speeds at each static setting
- Single-zone: One outdoor unit connects to one indoor unit to control the comfort in a single space.
- Unique blow through design: Unique blow through design allows simple coil cleaning when the blower is removed
Mitsubishi Wireless Wall Mounted Remote Controller Kit MHK2 Series Overview
MRCH2 Wireless Redlink Remote Controller Specifications
- Touchpanel, Backlit, easy-to-read display
- New RedLINK™ 3.0 wireless technology
- User functions allow user to set:
- - On/Off
- - Operation modes: cool, heat, drying, and fan
- - Set temperature(separate dual set points for heat and cool)
- - Fan speed setting
- - Airflow direction
- Set temperature range limits (dependent on the system connected):
- - Cooling from 50° to 99°F
- - Heating from 40° to 90°F
- - Auto from 50° to 90°F with dual temperature setting
- MHK2 Scheduling options:
- - No Schedule
- - MO-SU = Every day the same
- - MO-FR, SA, SU = 5-1-1schedule
- - MO-FR, SA-SU = 5-2 schedule
- - Each Day = Everyday individual
- - Allow kumo cloud to be schedule holder
- Hold function
- Temporary or Permanent schedule override
- Lockout:
- - On, Off, Mode, FanSpeed, Setpoint, VaneDirection
- Day/Time display with a 12 or 24-hour clock
- Supports both Fahrenheit and Celsius
- RedLINK™ Wireless Connection Status
- Filter sign display
- Diagnostics: Displays and records error codes
- Adjustable auto mode deadband
- Space temperature off set adjustment
- Space humidity off set adjustment
- Hide (on screen only)
- - Indoor temperature, Indoor humidity
- Temperature Sensing Source
- MHK2
- Indoor Unit
- RedLINK Wireless Indoor Air Sensor(IAS)
- Average of MHK2 and RedLINK Wireless Indoor Air Sensor (IAS)
- IndoorHumiditySource
- MHK2
- RedLINK Wireless Indoor Air Sensor (IAS)
- Average of MHK2 and RedLINK Wireless Indoor Air Sensor (IAS)
- Improved indoor unit function code list
- Indoor unit type
- Expanded to 28 indoor unit codes
- Reset to factory default
- Uses two “AA” alkaline batteries (included)
- Dimensions: 4-5/64” H x 4-5/64” W x 1-1/16” D (104x104x27mm)
- Operating Ambient Temperature: 32° to 120° F (0° to 48.9° C)
- Operating Relative Humidity: 5% to 90%
MIFH2 WIRELESS RECEIVER SPECIFICATIONS:
- Included in MHK2 Kit
- Mounts next to or near indoor units to allow MRCH2 Remote Controller operation
- Connects to indoor unit control board with MRC2 Cable
- Dimensions: 3-3/32” H x 1-3/4” W x 39/64” D (74.8 x 44.4 x 15.4 mm)
- Operating Ambient Temperature:-40° to 165°F(-40° to 73.9°C)
- Operating Relative Humidity: 5% to 95%
MRC2 CABLE
- Included in MHK2 Kit in the MIFH2 box
- Connects MIFH2 Wireless Receiver to the CN105 connectoron indoor unit control board
- Length: 39-23/64"(1m)
Outdoor Unit
Horizontal Ducted
Wall Mount
Ceiling Cassette
Multi-Positional Air Handler
MHK2 Controller
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST