Under the terms of all manufacturer's warranty and to comply with federal refrigerant handling laws, it is required that the system be checked, started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Failure to comply with this provision will void all factory warranties. Keep a copy of the installation ticket for your records. Please ensure that all supply and return ductwork is properly sized and that a permit is obtained (where required). Always conform with applicable local and state codes. Electrical connections should only be made by a licensed electrical contractor. Unqualified persons should never attempt installation of this or any HVAC system.
The M-series Mitsubishi Mr. Slim ducted heat pump air conditioners with R-410a refrigerant are perfect for use in residential and light commercial applications.
Whisper-quiet and extremely reliable, these systems go where traditional systems can't – Computer and phone rooms, room additions, music studios, and small offices, to name just a few.
The popular, proven and best selling Mitsubishi Mr. Slim air conditioning systems have two basic components: an easily installed indoor and outdoor unit.
For many years, ductless split air conditioner systems with wall mounted indoor units have been the quiet solution for cooling and heating problems around the world.
Now, if you are looking for indoor units that can be installed completely out of view in either a ceiling or beneath the floor, the SEZ series indoor ducted units are the ideal alternative to extensively ducted central systems.
One indoor unit can be ducted to two adjoining rooms, providing comfort in two spaces with minimal ductwork and installation effort. That means that a multi-zone system with two indoor units can discretely heat and cool up to 4 rooms.
These systems are similar to a central system in that the compressor is outside, eliminating the noise associated with wall-type units.
The Multi-Zone Mitsubishi Mr. Slim is the perfect addition for:
The indoor section is extremely quiet and is tucked away from view in either the ceiling or below the floor. Each indoor unit can heat and cool up to 2 adjoining rooms.
The MXZ-2B20NA multi-zone system is perfect for schools, hospitals, and homes where multiple room heating and cooling is desired but extensive ductwork is impractical.
The Mitsubishi Mr Slim Multi-Zone System is truly flexible to meet your specific needs and can cool and heat 2 separate areas (up to 4 individual rooms) that you select. Choose from up to 4 different indoor capacity combinations (don't worry - we'll help make the selection easy).
Each of the 2 selected indoor sections can be independently controlled , separate and apart from the other zones with the handheld, wireless remote control programmable thermostat.
You select the comfort level desired with customized and distinct temperature settings for each zone. Only through zone control can the use of energy be minimized without the wasted expense from cooling or heating unused areas.
R-410a refrigerant is a totally friendly, non-ozone depleting refrigerant, making smaller, more energy efficient systems practical. Fully compliant with new federal refrigerant regulations
Anti-allergy Enzyme Filter uses artificial blue enzyme catalyst on the filter filaments to capture harmful microbes
Hybrid Catechin Pre-filter fibers are infused with a bioflavinoid found in green tea that has antiviral and antioxidant properties
A-Control for Unit Wiring allows communication and power between outdoor and indoor units on only 3 wires
Inverter driven DC Compressor operates at high efficiency with outstanding reliability More
Pulse Amplitude Modulation (PAM) Control aligns electrical input wave to improve and condition the electrical power factor up to 98%
Low-ambient Cooling allows for efficient cooling operation with outdoor temperatures as low as 14 degrees F
Powerful Mode provides 15 minutes of extra high power cooling or heating
Plus: " Econo Cool" mode, 1 degree F step temperature setting, self-diagnostic function, swing mode (up and down), auto-restart, dry mode, and auto cool/heat changeover
Is it on ? That's the first thing our customers ask when their new Mitsubishi split system is started up for the first time. In fact, the computer on your desk may make more noise than the low speed fan setting on most Mitsubishi ducted split systems.
With indoor decibel levels of as low as 23Db, you won't even be able to tell when the system is actually operating.
To put this in perspective, a human whisper is in the range of about 40Db and a quiet refrigerator is around 48-55 Db. A decibel rating of 23 is inaudible even at very close range. You simply cannot buy a quieter system.
Mitsubishi Electric is the undisputed industry leader in ductless heating and air conditioning technology. The versatility and variety of applications is virtually unlimited.
Perhaps you have an older home or business that was built before ducted air conditioning became available and you desire the comfort and humidity control provided by air conditioning and heating.
The Mr. Slim ductless split system is the perfect answer for spot cooling or heating uncomfortable rooms without the expense associated with a traditional centrally ducted system.
Proven performance, long-term reliability and ease of installation make the Mr. Slim M-Series ductless air conditioner by Mitsubishi the smart and cost effective choice.
The M-series Mitsubishi ductless air conditioners and heat pumps with R-410a refrigerant are perfect for use in residential and light commercial applications. Whisper-quiet and extremely reliable, these systems go where ductwork can't - Computer and phone rooms, room additions, music studios, and small offices, to name just a few.
We all know what air conditioners and heat pumps can cost to operate but forget everything you know and consider the penny: That's right the penny. Because as little a 5 of them will get you one hour of comfort with this new Mitsubishi Ductless Split System. .
Bask in 100 hours of comfort for as little as $5.00.
That's just .05 cents per hour!
That means the energy required to provide the comfort you deserve is more affordable than ever.
Imagine never having to worry about high power bills again; just dial in a comfortable setting and walk away. In fact, with SEER ratings of 15.5, the Mitsubishi Mr. Slim ductless multi-zone heat pump is one of most efficient and cost-effective systems you can buy. Mitsubishi engineers designed these systems to provide peace of mind from both a comfort and energy standpoint.*
*Operating cost estimates based on a nationwide average of .10 cents per KW of energy usage. Your actual costs may vary.
Advanced Inverter Technology:
By controlling compressor rotation speed precisely, the innovative Inverter Technology offers exceptional performance and reduced energy consumption for maximum savings and comfort.
High Speed Heating and Cooling: Compressor rotation speed is controlled according to the cooling and heating demand of each zone. Maximum comfort is achieved by flexibly controlling compressor speed to accurately match operating requirements. More
Mitsubishi Electric is the undisputed industry leader in ductless heating and air conditioning technology. The versatility and variety of applications is virtually unlimited.
Perhaps you have an older home or business that was built before ducted air conditioning became available and you desire the comfort and humidity control provided by air conditioning and heating.
The Mr. Slim split system is the perfect answer for spot cooling or heating uncomfortable hot or cool rooms without the expense associated with a traditional centrally ducted system.
Proven performance, long-term reliability and ease of installation make the Mr. Slim M-Series heat pump by Mitsubishi the smart and cost effective choice.
Mitsubishi is world-renowned for the quality and durability of their ductless split systems. In fact, we have never encountered a more dependable heating and air conditioning system, period. Our warranty experience with these systems is outstanding and second to none. Our customers are ecstatic with both the quality and performance of their Mitsubishi air conditioner system, each and every time.
The Mitsubishi Mr. Slim is designed to be one of the most reliable air conditioners you can buy. In fact, every major component is designed and manufactured by Mitsubishi so the system provides highly reliable operation that is only possible when all components are purpose-designed and built to work in harmony.
The air conditioning and heating industry experiences an average failure rate in the United States of about 4%, or about 4 system failures for every 100 units built. The Mitsubishi Mr. Slim enjoys a failure rate that is only one-eighth of the industry average, or one-half of 1%.
This means that Mitsubishi will need to produce about 800 systems to experience the same 4 failures. That's quality the way it should be. You may find a system that is slightly less expensive upfront, but nobody beats Mitsubishi's total overall cost benefit that comes from rugged durability, parts availability, and ease of installation.
Mr. Slim SEZ ducted indoor units provide a cost effective alternative to traditional central systems that require extensive ductwork to function.
These amazing systems locate the indoor unit in the general area where heating and cooling is needed, utilizing short- run ducts to evenly and quietly distribute air throughout the space. This means easy installation and less mess.
Mitsubishi Mr. Slim includes a wireless control center that offers complete control and easy to use functions that don't require an advanced degree to operate.
These functions include a two-speed fan operation, Cool, Heat, Auto, and Dry operating modes and a programmable 24-hour timer for convenient, customized cooling on/off periods. The self-diagnostic LCD display quickly detects malfunctions and even pinpoints the location.
All Mitsubishi mini split outdoor units are designed with easy service and maintenance in mind. Service points are located behind easy-access panels to make installation easier for your service technician. All M-series indoor units feature a washable filter design without filter replacement headaches.
Use our handy ductless sizing calculator located here. This calculator will provide an estimate as to the size needed for your application. If you are still unsure, have a local contractor visit your jobsite for a thorough analysis of your needs.
For residential homes that are well insulated about 15-20 Btu's per square foot is normally sufficient. For the top floor in a multi-story home about 25-30 Btu's per square foot is required.
Standard office spaces with an average number of occupants and office equipment will require around 35-40 Btu's per square foot. If there are no outside exposed exterior walls this can be reduced by about 20%.
COMPONENT
WARRANTY