This system includes one heat pump AC condenser and one indoor unit of your choice.
Model #: PUZ-A18NHA
Dimensions: 31-1/2" W x 11-13/16" D x 23-5/8" H
Model #: PKA-A18HA7
Dimensions: 35-3/8" W x 9-13/16" D x 11-5/8" H
Model #: PVA-A18AA7
Dimensions: 17" W x 21-5/8" D x 50-1/4" H
Model #: PLA-A18EA7
Dimensions: 33-1/6" W x 33-1/16" D x 10-5/32" H
Model #: PLP-40BAU
Dimensions: 37-7/16" W x 37-7/16" D x 1-3/8" H
Model #: PEAD-A12AA7
Dimensions: 35-7/16" W x 28-7/8" D x 9-7/8" H
Under the terms of all manufacturer's warranty and to comply with federal refrigerant handling laws, it is required that the system be checked, started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Failure to comply with this provision will void all factory warranties. Keep a copy of the installation ticket for your records. Please ensure that all supply and return ductwork is properly sized and that a permit is obtained (where required). Always conform with applicable local and state codes. Electrical connections should only be made by a licensed electrical contractor. Unqualified persons should never attempt installation of this or any HVAC system.
Existing homes– The comfort of central air conditioning and heating without the fuss and mess of duct work. No unsightly duct chases or exposed duct work.
Installation is greatly simplified and the integrity of your home is maintained. Cool and heat only those areas you desire.
Mitsubishi Electric delivers flexible and convenient cooling and heating solutions to almost any commercial, institutional or large residential application. Choose from small, quiet indoor and outdoor units that operate with the increased efficiency you need. Whether in a church, office building, school, nursing home, restaurant, retail store, or equipment room, the compact design of the indoor units make cooling and heating difficult spaces a breeze.
With wall-mounted, ceiling-recessed, ceiling-suspended and horizontal ducted options, capacities of up to 42,000 Btu's of cooling or heating performance and available Hyper-Heating INVERTER P-Series technology that provides 100 percent heating capacity down to 5 degrees F, Mitsubishi Electric systems have the perfect solution for almost any building.
Innovative Compressor Technology
Located in the outdoor unit, INVERTER-driven compressor systems detect subtle changes in temperature and, like a car's cruise control, automatically adjust compressor speed unlike conventional units, which start and stop repetitively.
Special components within the compressor increase the magnetic flux and reduce its weight, allowing the compressor to generate higher energy efficiencies with higher performance than ever at low levels of sounds during start-up and running.
Flexible Control
Convenient and efficient zone control means you can cool or heat only the spaces in use. You can even have single or dual controllers connected to one system. The controller does not even have to be in the space shared with the indoor unit. Features of the controller include a weekly timer, temperature range limiting, auto-off, expanded fault codes, and service call number display.
In 2009 Mitsubishi Electric was given the GREEN PRODUCT award by the industry-leading publication, Building Products Magazine . They were one of only 16 products to receive this award for energy efficiency, resource efficiency, and health and comfort.
We'll ship the equipment at wholesale prices and you select the qualified contractor of your choice to install it. Â
Learn more about how commercial ductless air conditioners work in the AC4Life information center.
R-410a refrigerant is a totally friendly, non-ozone depleting refrigerant, making smaller, more energy efficient systems practical. Fully compliant with new federal refrigerant regulations
Inverter driven DC Compressor operates at high efficiency with outstanding reliability – Enjoy high speed cooling or heating and consistent delivery of comfort year-round
Pulse Amplitude Modulation (PAM) Control aligns electrical input wave to improve and condition the electrical power factor up to 98%
Quiet Operation – You can hold a board meeting or teach a class in quiet comfort
Easy Installation – Installs quickly room by room with minimal interruption
Advanced Microprocessor Technology – Built-in electronics ensure efficient operation and maximum performance for optimum comfort
Zone Control – You can cool or heat only those spaces in use for maximum control and energy efficiency
Low-ambient Cooling allows for efficient cooling operation with outdoor temperatures as low as 0 degrees F (requires accessory wind baffle)
Powerful Mode provides 15 minutes of extra high power cooling
Plus: " Econo Cool" mode, 1 degree F step temperature setting, self-diagnostic function, swing mode (up and down), auto-restart, and dry mode.
Wall mounted– Easily installed above windows or doorways. Can be installed in about half a day. Requires only a 3†hole in the wall or ceiling, so they can be installed in some of the toughest spaces, even on brick or masonry walls. Fully adjustable airflow, keeping room temperatures even throughout the space.
Ceiling Suspended -
Mounts conveniently on the ceiling. With 4 different selectable airflow positions, the air is distributed evenly throughout the space for better comfort. Auto Vane cooling feature permits the angle to self-adjust into a horizontal position and circulate cold air more effectively
Horizontal Ducted – If you have a crawl or attic space, this unit can be tucked away, completely out of sight and will comfortably cool up to 2 adjoining rooms. Use in place of inefficient and extensive duct systems. Locate the ducted unit in the area it will cool using a short, efficient duct run. No visual intrusion within the space
Ceiling Recessed (Cassette) - When installed, the flush-mounted grille is all you see. With its fresh air intake capability and four-way discharge airflow, the PL series ceiling cassette gives you plenty of fresh, comfortable air. Built-in condensate removal pump is included. You'll need about a foot of area above the ceiling.
Tip: Use our convenient sizing calculator to get an idea of how much cooling you need on a room-by-room basis.
Freight delivery to your home or office: This item will be delivered curbside to your home or business via a tractor-trailer freight vehicle. Delivery is available to Alaska and Hawaii for an additional fee — Call 1-866-862-8922 for more details. Delivery takes 5-7 business days once your order has been processed. Allow extra time for delivery to remote addresses. Inspect all boxed items carefully before signing by removing the cartons from the equipment.
100 hours Of Cooling Comfort For As Little As $10.00.
That's just .10 cents per hour.
COMPONENT
WARRANTY
Note:It is the customer's responsibility to register the product with the manufacturer. One of the main benefits of registering the product is extending the manufacturer warranty to 10 years; otherwise coverage is 5 years.
Under the terms of all manufacturer's warranty and to comply with federal refrigerant handling laws, it is required that the system be checked and started up and signed-off on by a licensed air conditioning/heating contractor prior to use. Please ensure that all supply and return ductwork is properly sized and that the installation is permitted (where required) and conforms with local and state codes. Electrical connections should always be made by a licensed electrical contractor.