Use Code 3offACD for an Extra 3% Off
Free Shipping On Orders Over $1500
America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Good for extreme southern climates with very low heating demand such as south Florida and south Texas (otherwise a heat pump is the best option)
Intertherm 20 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet (E7ED-B020K1)
Model #: E7ED-B020K1
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Good for extreme southern climates with very low heating demand such as south Florida and south Texas (otherwise a heat pump is the best option)
Intertherm 20 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7ED-B020K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
High-Capacity Electric Heat Built Around Manufactured-Home Comfort
Powerful 20 kW heating supports dependable warmth in properly sized factory-built homes.
The Intertherm E7ED-B020K1 is a nominal 20 kW downflow electric furnace designed for manufactured and modular home applications requiring higher heating capacity. It delivers up to approximately 63,000 BTUs at 230 volts or 51,000 BTUs at 208 volts when properly installed and supplied with the required electrical service.
For homeowners familiar with the former Revolv product family, Intertherm now carries that specialized manufactured-home HVAC legacy forward. The furnace combines durable nichrome heating elements with a 16-speed constant-torque ECM blower. Its factory-installed coil cabinet supports the addition of an approved coil for a compatible air conditioner or heat pump.
- Nominal 20 kW heating capacity: Supplies approximately 63,000 BTUs at 230 volts or 51,000 BTUs at 208 volts.
- High-capacity downflow heating: Delivers warm air through compatible manufactured-home floor duct systems.
- 16-speed ECM blower: Allows heating and cooling airflow to be adjusted for the installed equipment.
- Compatible comfort-system design: Supports approved 2- to 4-ton air conditioners and heat pumps.
- Factory-installed coil cabinet: Provides an integrated location for a compatible indoor coil.
- Durable nichrome elements: Offer reliable electric heat with minimal routine mechanical maintenance.
- Fully insulated cabinet: Helps reduce heat loss and equipment noise.
- Built-in electrical protection: Circuit breakers and automatic-reset controls help protect the unit during operation.
The E7ED-B020K1 is a strong option when a professional heat-loss calculation confirms that higher-capacity electric heat is required. Because this model places a substantial demand on the electrical system, service capacity, wiring, circuit protection, ductwork, and connected HVAC equipment must be verified before purchase.
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST