Intertherm 3 Ton AC And 80% AFUE Downflow Gas Furnace System with Coil Cabinet for Mobile Homes - Select Your Furnace, R454B

Reliable Gas Heating Designed Around the Manufactured-Home Footprint

Single-stage downflow comfort with configuration options for compatible central cooling systems.

The Intertherm MG1E Series Gas Furnace provides dependable single-stage heating for compatible manufactured and mobile homes. Its downflow, front-return design fits the specialized airflow arrangement commonly found in factory-built housing, where heated air is delivered into ductwork below the furnace.

MG1E models offer up to 80% AFUE and nominal input capacities from 56,000 to 90,000 BTU. Available configurations include models with or without an integrated coil cabinet, allowing the furnace to support qualifying replacement installations and compatible central air-conditioning systems.

• Up to 80% AFUE: Provides established gas-furnace performance for factory-built housing.
• Single-Stage Heating: Delivers a consistent level of heat when the thermostat calls.
• Downflow/Front-Return Design: Matches common manufactured-home duct and return-air layouts.
• Multiple Heating Capacities: Available in nominal input capacities from 56,000 to 90,000 BTU.
• Coil-Cabinet Options: Models are available with or without an integrated cabinet for compatible cooling coils.
• Natural Gas or Propane Capability: Conversion must follow the manufacturer’s instructions using approved components.
• Matched Cooling Options: Designed to work with approved Intertherm coils and outdoor equipment.

The Intertherm MG1E Series was formerly sold under the Revolv brand. Before purchasing, confirm the required heating capacity, fuel type, return-air arrangement, coil-cabinet configuration and approved cooling-system match.

Complete the Furnace Venting Path Through the Home’s Roof

Adjustable roof-jack options help provide the combustion-air and exhaust path required by compatible furnaces.

Intertherm Roof Jack Kits are designed for compatible MG1E and M5SB manufactured-home furnaces that require a roof-mounted venting assembly. The roof jack extends from the furnace through the ceiling and roof, allowing the system to draw combustion air and discharge flue gases outdoors.

Available in multiple adjustment ranges and configurations for flat or sloped roofs, these roof jacks allow a qualified installer to select the model that matches the home’s roof pitch and vertical distance. Their aluminum construction provides corrosion resistance for long-term outdoor exposure.

• Furnace-Specific Application: Designed for compatible Intertherm MG1E and M5SB furnaces.
• Multiple Length Ranges: Adjustable options accommodate different ceiling and roof dimensions.
• Flat and Sloped Roof Options: Models are available for several roof-pitch requirements.
• Combustion-Air and Exhaust Path: Supports the furnace’s required outdoor venting process.
• Aluminum Construction: Provides corrosion resistance for exterior installation.
• Matched Installation: Designed to connect with the applicable furnace and roof configuration.

These Intertherm roof-jack products were formerly marketed under the Revolv brand. Select the exact model according to the furnace, roof pitch and required adjustment range; the product image may be representative of the roof-jack family rather than the exact dimensions of every model.

Purpose-Built Indoor Cooling for 3.5-Ton Manufactured-Home Systems

A compact micro-channel coil engineered specifically for approved air-conditioning applications.

The Intertherm C85DAMX42U-B is a 3.5-ton, 42,000 BTU uncased indoor evaporator coil designed for compatible manufactured and modular home air-conditioning systems. This model is intended for cooling-only applications and should be paired with an approved Intertherm air conditioner and compatible furnace.

For customers who previously knew this equipment family under the Revolv name, Intertherm carries that manufactured-home HVAC heritage forward. The coil uses a vertical micro-channel A-coil design and a factory-installed TXV to regulate R454B refrigerant flow, supporting dependable cooling and efficient system operation.

• 3.5-ton cooling capacity: Supports approved air-conditioning systems with approximately 42,000 BTUs of nominal capacity.
• Cooling-only application: Designed for compatible split-system air conditioners rather than heat-pump installations.
• R454B compatibility: Engineered for current R454B refrigerant systems.
• Micro-channel construction: Provides efficient indoor heat transfer in a compact coil assembly.
• Factory-installed TXV: Controls refrigerant flow to help the air conditioner perform consistently across changing conditions.
• Uncased vertical design: Installs within an approved manufactured-home furnace or coil cabinet.
• Manufactured-home fit: Designed around the specialized indoor equipment configuration of factory-built housing.

The C85DAMX42U-B is a strong replacement or new-system option when a certified 3.5-ton cooling-only match calls for this exact coil. It is not interchangeable with the similarly sized C85DAMX43U-B heat-pump coil; a qualified HVAC professional should verify the complete equipment match before ordering.