Use Code 3offACD for an Extra 3% Off
Free Shipping On Orders Over $1500
America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- 3 ton - best for spaces between 1500 - 1800 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Good for extreme southern climates with very low heating demand such as south Florida and south Texas (otherwise a heat pump is the best option)
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
Intertherm 3 Ton AC & Downflow Electric Furnace System with Coil Cabinet for Mobile Homes - Choose a Compatible Furnace, R454B
- Condenser: HSA4ME5M1SN36K
- Electric Furnace: 10kW - 15kW Options
- Uncased Coil: C85DAMX3036U-B
- 3 ton - best for spaces between 1500 - 1800 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Good for extreme southern climates with very low heating demand such as south Florida and south Texas (otherwise a heat pump is the best option)
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
As low as $5,109.01 was $5,240.00
Intertherm 3 Ton 14.3 SEER2 Air Conditioner Condenser for Mobile Homes, R454B
Model Number
HSA4ME5M1SN36K
Dimensions
31.75" W x 31.75" D x 37.25" H
Documents
Warranty
Standard: Parts: 1 year | 5 years
Registered: Parts: 5 years | 10 years
Intertherm 12 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7ED-B012K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 15 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7ED-B015K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 17 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7ED-B017K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 2.5-3 Ton Uncased A-Vertical Evaporator Coil With TXV for Mobile Home - 19-3/4-inch Cabinet Width, R454B
Model Number
C85DAMX3036U-B
Dimensions
18-1/8" W x 19-1/3" D x 18" H
Documents
Warranty
Parts: 3 year
Dependable Home Cooling Engineered for Hot-Weather Comfort
Efficient 3-ton cooling designed around the specialized needs of factory-built homes.
The Intertherm HSA4ME5M1SN36K is a 3-ton, 36,000 BTU split-system air conditioner designed for compatible manufactured and modular home HVAC installations. With a 14.3 SEER2 efficiency rating, it provides reliable cooling while helping homeowners manage energy consumption during warm weather.
For customers who previously purchased or searched for Revolv equipment, Intertherm is the current brand carrying that manufactured-home HVAC product tradition forward. The HSA4ME outdoor unit is protected by a powder-coated galvanized-steel cabinet engineered to withstand exposure to outdoor conditions while maintaining a clean, modern appearance.
- 3-ton cooling capacity: Delivers approximately 36,000 BTUs of cooling for properly sized applications.
- 14.3 SEER2 performance: Provides efficient cooling and an opportunity to reduce energy use compared with older systems.
- R454B refrigerant: Incorporates a modern refrigerant with a lower environmental impact than R410A.
- Manufactured-home application: Designed specifically for use with compatible factory-built home equipment.
- Protective steel cabinet: Powder-coated galvanized steel helps resist corrosion, fading, scratching, and chipping.
- Matched-equipment design: Works with approved Intertherm indoor coils and furnaces for complete-system operation.
The HSA4ME5M1SN36K is well suited for homeowners who need dependable 3-ton cooling and want equipment engineered specifically for factory-built housing. Proper load calculation, equipment matching, and professional installation are essential for achieving the expected comfort and efficiency.
Dependable Downflow Electric Heating for Factory-Built Homes
Comfortable, all-electric heat designed for homes with ductwork located beneath the furnace.
The Intertherm E7ED Series Electric Furnace provides dependable heating for compatible manufactured and mobile homes with downflow duct systems. In a downflow installation, heated air moves from the furnace into ductwork located beneath the unit, making this configuration a practical replacement choice for many factory-built homes.
Available in heating capacities from 10 to 23 kW, the E7ED family makes it easier to match the furnace to the home’s heating requirements. Its compact cabinet supports installation in common manufactured-home utility spaces, while front service access helps qualified HVAC professionals perform routine inspection and maintenance.
- Downflow Configuration: Designed to deliver heated air into ductwork below the furnace.
- Multiple Heating Capacities: Available in 10, 12, 15, 17, 20 and 23 kW models.
- All-Electric Operation: Provides heat without an onsite gas burner or combustion flue.
- Compact Cabinet: Designed for the space requirements commonly found in factory-built homes.
- Front Service Access: Helps simplify professional inspection and maintenance.
- Cooling-System Compatibility: Can support a matched central air-conditioning installation when paired with approved components.
The Intertherm E7ED Series was formerly sold under the Revolv brand. Choose the appropriate model based on the required heating capacity, electrical service and compatible cooling equipment, and have the system sized and installed by a qualified HVAC professional.
Purpose-Built Indoor Cooling for 3.5-Ton Manufactured-Home Systems
A compact micro-channel coil engineered specifically for approved air-conditioning applications.
The Intertherm C85DAMX42U-B is a 3.5-ton, 42,000 BTU uncased indoor evaporator coil designed for compatible manufactured and modular home air-conditioning systems. This model is intended for cooling-only applications and should be paired with an approved Intertherm air conditioner and compatible furnace.
For customers who previously knew this equipment family under the Revolv name, Intertherm carries that manufactured-home HVAC heritage forward. The coil uses a vertical micro-channel A-coil design and a factory-installed TXV to regulate R454B refrigerant flow, supporting dependable cooling and efficient system operation.
- 3.5-ton cooling capacity: Supports approved air-conditioning systems with approximately 42,000 BTUs of nominal capacity.
- Cooling-only application: Designed for compatible split-system air conditioners rather than heat-pump installations.
- R454B compatibility: Engineered for current R454B refrigerant systems.
- Micro-channel construction: Provides efficient indoor heat transfer in a compact coil assembly.
- Factory-installed TXV: Controls refrigerant flow to help the air conditioner perform consistently across changing conditions.
- Uncased vertical design: Installs within an approved manufactured-home furnace or coil cabinet.
- Manufactured-home fit: Designed around the specialized indoor equipment configuration of factory-built housing.
The C85DAMX42U-B is a strong replacement or new-system option when a certified 3.5-ton cooling-only match calls for this exact coil. It is not interchangeable with the similarly sized C85DAMX43U-B heat-pump coil; a qualified HVAC professional should verify the complete equipment match before ordering.
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST