Use Code 3offACD for an Extra 3% Off
Free Shipping On Orders Over $1500
America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Good for extreme southern climates with very low heating demand such as south Florida and south Texas (otherwise a heat pump is the best option)
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
Intertherm 4 Ton Heat Pump & Downflow Electric Furnace System with Coil Cabinet for Mobile Homes - Choose a Compatible Furnace, R454B
- Condenser: HSH4ME5M1SP48K
- Electric Furnace Options: 15kW - 23kW
- Uncased Coil: C85DAMX48U-B
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Good for extreme southern climates with very low heating demand such as south Florida and south Texas (otherwise a heat pump is the best option)
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
As low as $6,387.23 was $6,551.00
Intertherm 4 Ton 14.3 SEER2 Heat Pump for Mobile Homes, R454B
Model Number
HSH4ME5M1SP48K
Dimensions
31.75" W x 31.75" D x 45" H
Documents
Warranty
Standard: Parts: 1 year | 5 years
Registered: Parts: 5 years | 10 years
Intertherm 15 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7ED-B015K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 17 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7ED-B017K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 20 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7ED-B020K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 23 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7ED-B023K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 4 Ton Uncased A-Vertical Evaporator Coil With TXV for Mobile Home - 19-3/4-inch Cabinet Width, R454B
Model Number
C85DAMX48U-B
Dimensions
18-1/8" W x 19-1/6" D x 25" H
Documents
Warranty
Parts: 3 year
High-Capacity Heating and Cooling Built for Year-Round Reliability
Efficient 4-ton performance delivers dependable comfort for properly sized factory-built homes.
The Intertherm HSH4ME5M1SP48K is a 4-ton, 48,000 BTU split-system heat pump engineered for compatible manufactured and modular home HVAC installations. It provides substantial cooling capacity during hot weather while also operating as an efficient heating system when temperatures fall.
For homeowners familiar with equipment formerly sold under the Revolv name, Intertherm now carries that factory-built home HVAC tradition forward. This model offers 14.3 SEER2 cooling efficiency and 7.5 HSPF2 heating efficiency. Its scroll compressor helps support reliable, quieter operation, while Guardian Seal and durable cabinet construction protect the outdoor equipment from weather-related wear.
- 4-ton capacity: Supplies approximately 48,000 BTUs of heating and cooling for higher-capacity applications.
- Year-round home comfort: Combines summer air conditioning and efficient heat-pump heating in one system.
- 14.3 SEER2 cooling efficiency: Helps deliver strong cooling performance while managing seasonal energy consumption.
- 7.5 HSPF2 heating efficiency: Supports efficient heat-pump operation during cooler weather.
- R454B refrigerant: Uses a modern refrigerant with lower global warming potential than R410A.
- Scroll compressor: Provides smooth, durable, and quieter operation.
- Guardian Seal protection: Helps protect the outdoor unit against corrosion, fading, scratching, and chipping.
- Matched-system design: Works with approved Intertherm C85DA coils and compatible furnace equipment.
The HSH4ME5M1SP48K provides a durable all-season solution for manufactured or modular homes that require 4-ton capacity. Professional load calculation, approved indoor-equipment matching, and qualified installation are necessary to achieve the expected comfort and efficiency.
Dependable Downflow Electric Heating for Factory-Built Homes
Comfortable, all-electric heat designed for homes with ductwork located beneath the furnace.
The Intertherm E7ED Series Electric Furnace provides dependable heating for compatible manufactured and mobile homes with downflow duct systems. In a downflow installation, heated air moves from the furnace into ductwork located beneath the unit, making this configuration a practical replacement choice for many factory-built homes.
Available in heating capacities from 10 to 23 kW, the E7ED family makes it easier to match the furnace to the home’s heating requirements. Its compact cabinet supports installation in common manufactured-home utility spaces, while front service access helps qualified HVAC professionals perform routine inspection and maintenance.
- Downflow Configuration: Designed to deliver heated air into ductwork below the furnace.
- Multiple Heating Capacities: Available in 10, 12, 15, 17, 20 and 23 kW models.
- All-Electric Operation: Provides heat without an onsite gas burner or combustion flue.
- Compact Cabinet: Designed for the space requirements commonly found in factory-built homes.
- Front Service Access: Helps simplify professional inspection and maintenance.
- Cooling-System Compatibility: Can support a matched central air-conditioning installation when paired with approved components.
The Intertherm E7ED Series was formerly sold under the Revolv brand. Choose the appropriate model based on the required heating capacity, electrical service and compatible cooling equipment, and have the system sized and installed by a qualified HVAC professional.
High-Capacity Indoor Cooling Designed for Factory-Built Homes
Efficient 4-ton heat transfer supports dependable cooling in properly matched air-conditioning systems.
The Intertherm C85DAMX48U-B is a 4-ton, 48,000 BTU uncased indoor evaporator coil developed for compatible manufactured and modular home air-conditioning systems. This model is intended for cooling-only applications and works with an approved outdoor air conditioner and compatible indoor furnace.
For homeowners familiar with the former Revolv equipment line, Intertherm now carries that manufactured-home HVAC tradition forward. Its micro-channel A-coil design efficiently transfers indoor heat to the R454B refrigerant, while the factory-installed TXV regulates refrigerant flow to support consistent cooling performance.
- 4-ton cooling capacity: Supports approved air-conditioning systems with approximately 48,000 BTUs of nominal capacity.
- Cooling-only design: Intended for compatible air-conditioner combinations rather than heat-pump applications.
- R454B compatibility: Engineered for current R454B split-system equipment.
- Micro-channel construction: Supports efficient heat transfer through a compact indoor coil design.
- Factory-installed TXV: Adjusts refrigerant flow to help maintain proper system performance.
- Vertical A-coil configuration: Designed for compatible manufactured-home furnace and airflow arrangements.
- Uncased installation: Fits inside an approved furnace or coil cabinet without an additional outer casing.
The C85DAMX48U-B provides the indoor heat-transfer component needed for an approved 4-ton Intertherm cooling system. Because this model is designed for air-conditioning applications, a qualified HVAC professional should verify the outdoor condenser, furnace, airflow, and certified coil match before purchase.
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST