You have no items in your shopping cart.
(1) Direct Comfort 3.0 Ton High Efficiency Variable Speed Air Handler - DC-AVPTC37C14A (Dimensions: 21" W x 19_7/8" D x 53_7/16" H)
- ComfortNet™ Communicating System compatible
- 2- to 5-ton blower capacities
- All-aluminum evaporator coil
- Variable-speed ECM blower motor
Files
Product SpecficationsGoodman AVPTC Multi-Position, Internal TXV Variable-Speed ECM Based Comfortnet Compatible Air Handler Features
- Internal factory-installed thermal expansion valves for cooling and heat pump applications
- Variable-speed ECM blower motor
- ComfortNet™ Communicating System compatible
- Auto configuration of the airflow and tonnage in communicating mode
- Provides constant CFM over a wide range of static pressure conditions independent of duct system
- CFM indicator
- Fault recall of six most recent faults
- Provides adjustable low CFM for efficient fan-only operation
- Improved humidity and comfort control
- Built-in compatibility with multi-stage heat pump and cooling applications
- All-aluminum evaporator coil
- 3 kW – 25 kW electric heater kits
- AHRI certified; ETL listed
- Rigid SmartFrame™ cabinet
- Cabinet air leakage less than 2.0% at 1.0 inch H2O when tested in accordance with ASHRAE standard 193
- Cabinet air leakage less than 1.4% at 0.5 inch H2O when tested in accordance with ASHRAE standard 193
- Horizontal or vertical configuration capabilities
- 21" depth for easier attic access
- DecaBDE-free thermoplastic drain pan with secondary drain connections
- Screw-less sides and back helps to reduce condensation when installed in humid locations
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- Galvanized, leather grain-embossed finish
- Glue-less cabinet insulation retention
- Tool-less filter access



COMPONENT
- PARTS
WARRANTY
- 10 years
Direct Comfort products and systems are covered by outstanding limited warranties. Be certain to review the standard and registered limited warranty coverage associated with the Direct Comfort product that you select for your home. Note: You do not need to register for the standard warranty coverage, but you will get additional warranty protection by registering the model and serial number of your product at www.directcomforthvac.com within 60 days of installation.* In both cases, installation must be performed by a local, independent contractor that meets the local, state and federal requirements for the installation of HVAC equipment.
Download the complete warranty for this product here.
*Registration is not required in California or Quebec to get the additional protection.