America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
11am - 8pm EST
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Heat pumps are all electric and good for mild and cold climates.
Mitsubishi 18000 BTU Mini Split AC Ducted Air Handler Indoor Unit And MHK2 [SVZ-AP18NL,MHK2] | R454B
- Indoor Unit: SVZ-AP18NL
- Controller: MHK2
Mini Split Sizing BTU Calculator
Use this Free & Easy Mini Split BTU Calculator to Select the Right Size Mini Split AC or Heat Pump for your Home.
When using a mini split sizing calculator for rooms below a conditioned space, apply an additional .7 factor to your final Btu outcome.
For example, if your Btu requirement via this calculator is 18,000 Btu's: 18,000 Btu's x .7 factor = 12,600 Btu's required. When in doubt, it is okay to go up a size or two. Unlike standard non-variable systems, The mini split inverter technology allows the system to adjust to the actual room requirements in both heating and cooling.
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Heat pumps are all electric and good for mild and cold climates.
As low as $3,170.30 was $3,393.20
Free Shipping
Over $1500
DELIVERY TIME 5-10 BUSINESS DAYS
EXCLUDING WEEKENDS AND HOLIDAYS
Professional Support Staff
GUARANTEED LOWEST PRICES
FREE
SHIPPING
OVER $1500
DELIVERY TIME
5 - 10 BUSINESS DAYS, EXCLUDING WEEKENDS AND HOLIDAYS
PROFESSIONAL
SUPPORT STAFF
ADD TO CART FOR
GUARANTEED LOWEST PRICES
0% Interest
Orders $3000+ offered at checkout
No Credit Needed
Bad credit/no credit is OK - offered at checkout
Orders over $2500 get a
7 night luxury resort stay
Mitsubishi 18000 BTU Mini Split AC Ducted Air Handler Indoor Unit
Model Number
SVZ-AP18NL
Dimensions
17" W x 21-5/8" D x 39-13/16" H
Documents
Warranty
Parts: 10 years
MHK2 Kit
Mitsubishi Wireless Remote Controller
Model Number
MRCH2
Dimensions
4-5/64" W x 1-1/16" D x 4-5/64" H
Documents
Warranty
Parts: 5 years
Mitsubishi Wireless Receiver
Model Number
MIFH2
Dimensions
1-3/4" W x 39/64" D x 3-3/32" H
Documents
Warranty
Parts: 5 years
Mitsubishi Cable For Wireless Receiver
Model Number
MRC2
Length
39-23/64"
Documents
Warranty
Parts: 5 years
SVZ-AP18NL Overview
The SVZ Multi-position Air Handler is a quiet, compact unit that can be installed either horizontally or vertically, making it easy to fit in almost any space in your home. It’s built with durable, corrosion-resistant materials and includes a built-in humidifier. This energy-efficient, eco-friendly system is a great replacement for traditional heating and cooling systems, and it works well in new homes, additions, or upgrades.
- Unique blow through design: Unique blow through design allows simple coil cleaning when the blower is removed
- Selectable external static pressure: Selectable external static pressure: 0.30, 0.50 and 0.80 in.WG with 3 fan speeds at each static setting
- Positive pressure cabinet: Positive pressure cabinet with air leakage of less than 1.0% at 1.0 in.WG
- Optional humidifier control and ERV control
- Optional electric heat kit: Optional electric heat kit for additional heat capacity
- Multiple control options, including the comfort app for remote access, third party interfaces, and both wired and wireless controllers
- Multi-zone: A multi-zone unit provides the temperature management of multiple zones within a building.
- Multi-position installation: Multi-position installation: horizontal (left or right), vertical (up or down). For downflow configurations, the CMA-1 is recommended for proper management of condensate to prevent water blow-off in certain conditions
- Fiberglass free insulation: 1 inch R4.2 fiberglass free insulation reduces condensation and boosts efficiency
- Enclosed ECM motor: Highly efficient totally enclosed ECM motor
- Ducted air handler: Ducted air handler provides a solution to cool and heat large zones
Mitsubishi Wireless Wall Mounted Remote Controller Kit MHK2 Series Overview
MRCH2 Wireless Redlink Remote Controller Specifications
- Touchpanel, Backlit, easy-to-read display
- New RedLINK™ 3.0 wireless technology
- User functions allow user to set:
- - On/Off
- - Operation modes: cool, heat, drying, and fan
- - Set temperature(separate dual set points for heat and cool)
- - Fan speed setting
- - Airflow direction
- Set temperature range limits (dependent on the system connected):
- - Cooling from 50° to 99°F
- - Heating from 40° to 90°F
- - Auto from 50° to 90°F with dual temperature setting
- MHK2 Scheduling options:
- - No Schedule
- - MO-SU = Every day the same
- - MO-FR, SA, SU = 5-1-1schedule
- - MO-FR, SA-SU = 5-2 schedule
- - Each Day = Everyday individual
- - Allow kumo cloud to be schedule holder
- Hold function
- Temporary or Permanent schedule override
- Lockout:
- - On, Off, Mode, FanSpeed, Setpoint, VaneDirection
- Day/Time display with a 12 or 24-hour clock
- Supports both Fahrenheit and Celsius
- RedLINK™ Wireless Connection Status
- Filter sign display
- Diagnostics: Displays and records error codes
- Adjustable auto mode deadband
- Space temperature off set adjustment
- Space humidity off set adjustment
- Hide (on screen only)
- - Indoor temperature, Indoor humidity
- Temperature Sensing Source
- MHK2
- Indoor Unit
- RedLINK Wireless Indoor Air Sensor(IAS)
- Average of MHK2 and RedLINK Wireless Indoor Air Sensor (IAS)
- IndoorHumiditySource
- MHK2
- RedLINK Wireless Indoor Air Sensor (IAS)
- Average of MHK2 and RedLINK Wireless Indoor Air Sensor (IAS)
- Improved indoor unit function code list
- Indoor unit type
- Expanded to 28 indoor unit codes
- Reset to factory default
- Uses two “AA” alkaline batteries (included)
- Dimensions: 4-5/64” H x 4-5/64” W x 1-1/16” D (104x104x27mm)
- Operating Ambient Temperature: 32° to 120° F (0° to 48.9° C)
- Operating Relative Humidity: 5% to 90%
MIFH2 WIRELESS RECEIVER SPECIFICATIONS:
- Included in MHK2 Kit
- Mounts next to or near indoor units to allow MRCH2 Remote Controller operation
- Connects to indoor unit control board with MRC2 Cable
- Dimensions: 3-3/32” H x 1-3/4” W x 39/64” D (74.8 x 44.4 x 15.4 mm)
- Operating Ambient Temperature:-40° to 165°F(-40° to 73.9°C)
- Operating Relative Humidity: 5% to 95%
MRC2 CABLE
- Included in MHK2 Kit in the MIFH2 box
- Connects MIFH2 Wireless Receiver to the CN105 connectoron indoor unit control board
- Length: 39-23/64"(1m)
- 2677
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST