Choose your 1.5 ton or 2 ton AC unit and get wholesale prices right here. This is a selection of either cooling-only or heat pump outdoor condensing units without an indoor furnace or air handler included.
If you have an existing system in place and want to replace just the outdoor AC unit, you’re on the right page.
If you need a full system, see our complete system offerings below:
A 3 ton unit will typically cool between 1500 square feet and 1800 square feet. See our free system sizing calculator if you need help. The broad range for sizing is 500-600 square feet of living space per ton of cooling.
However, 500-600 square feet per ton of cooling is just a general assumption and should not be your only source of sizing information.
Some newer, very well insulated homes may only need 1 ton of cooling for 800 to 1000 square feet. An older, poorly insulated home may need 1 ton for each 400 square feet of living space.
Insulation and window quality have a huge impact on properly sizing your air conditioning and heating system.
An upstairs space requires considerably more cooling than a downstairs space with the exact same square footage.
Your best way to know for sure is to get a local HVAC contractor to visit your home to help you with the sizing of your system.
The issue here is that an oversized air conditioner will cool the home too quickly and begin to “short-cycle”. Short-cycling occurs when the system cycles on and off too frequently. A system that is too large for your home will cool so quickly that it will cycle off prematurely.
(Such as installing a 3 ton AC system when a 2 ton would have been optimum.)
This frequent cycling not only reduces the operating life of the equipment but also creates a more immediate problem; lack of proper humidity removal.
Your air conditioning system needs to run long enough between it’s on and off cycles to remove the humidity in the air of your home. When the system satisfies the set temperature of your thermostat too quickly, it does not have enough time to reduce the humidity in your home to a comfortable level.
This, in turn, means that you will always feel warmer than necessary which further means you and your family will probably drop the temperature setting by a few degrees. Each degree you reduce the temperature by increases your system operating time as well as the utility cost by 10%.
Ideally, your AC unit will be just the right size to achieve an optimum level of comfort based on both temperature AND humidity.
Goodman is the largest manufacturer of heating and cooling systems in the world. They are known for their reliability and value-oriented pricing. Parts are readily available throughout the US and the world.
AC Direct has had a working relationship with Goodman for 20 years. We trust their reliability and particularly appreciate their drive to increase the efficiency levels of AC units across the globe.
Their prices are very reasonable, providing excellent value in terms of superior equipment lifespan, reliability, and dealer factory support.
Brothers Richard and Donald Rheem founded Rheem Manufacturing Company in Emeryville, CA, in 1925.
During almost 100 years of operation, Rheem is currently the only manufacturer in the world that produces heating, cooling, water heating, pool & spa heating and commercial refrigeration products, and it is the largest manufacturer of water heating products in North America.
From industry-leading technologies to next- generation energy efficiencies, Rheem has been a pioneer in developing some of the most innovative advancements in heating, cooling and water heating.
With a long list of award-winning solutions, Rheem continues providing advanced comfort, savings and experiences for their customers—just as they’ve done for nearly 100 years.
At AC Direct for almost 20 years we’ve appreciated and applauded Rheem’s commitment to quality and reliability in their full line of AC unit production along with a broad offering of complete systems for both residential and commercial applications.
Direct Comfort offers a complete line of residential air conditioning and heating home comfort products designed, engineered and assembled in the United States. Direct Comfort can provide you with years and years of reliable indoor comfort.
Direct Comfort is sold exclusively through a network of third party independent internet resellers such as AC Direct. This network of resellers specializes in working with homeowners researching online for the best overall value for their home comfort needs.
If you are a homeowner looking to purchase your next 1.5 ton or 2 ton AC unit or complete system, you can now buy online in confidence knowing that AC Direct, as a leader in this network, has committed to uphold a high set of standards, ethics, and professionalism in selling, marketing, and supporting your Direct Comfort HVAC equipment purchase.
Direct Comfort prides itself on testing to some of the most stringent manufacturing quality standards in the AC unit industry.
This means that when you select AC Direct and the Direct Comfort brand, you can rest assured that you have made a wise decision by choosing a high-quality product designed to deliver the most for you and your home.
AC Direct - Right System, Right Price, Right Away!
If you have questions or need help give us a call!