America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- 2 ton - best for spaces between 1000 - 1200 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- If you have an indoor furnace, or air handler, along with an outdoor AC unit, this system will serve as a replacement for both.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- Low NOx and Ultra-Low NOx refers to California (only) emission limits on nitrogen oxides released by gas furnaces and are determined by local EPA standards and will vary for each type of gas furnace.
Goodman 2 Ton 15 SEER2 AC & Gas Furnace System - 60,000 BTU 96% AFUE Multi-Speed Ultra-Low NOx Gas Furnace, California & Colorado Compliant, Upflow, R32
- Condenser: GLXS5BA2410
- Gas Furnace: GR9S960603BU
- Evaporator Coil: CAPTA3022B3
Furnace BTU Sizing Tonnage Calculator
Heating Square Footage Range by Climate Zone
| Region 1 | Region 2 | Region 3 | Region 4 | Region 5 |
| 30 - 35 BTU's per square foot | 35 - 40 BTU's per square foot | 40 - 45 BTU's per square foot | 45 - 50 BTU's per square foot | 50 - 60 BTU's per square foot |
- 2 ton - best for spaces between 1000 - 1200 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- If you have an indoor furnace, or air handler, along with an outdoor AC unit, this system will serve as a replacement for both.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- Low NOx and Ultra-Low NOx refers to California (only) emission limits on nitrogen oxides released by gas furnaces and are determined by local EPA standards and will vary for each type of gas furnace.
Free Shipping
Over $1500
*Excludes Commercial Products
DELIVERY TIME 3-10 BUSINESS DAYS
EXCLUDING WEEKENDS AND HOLIDAYS
ProfessionalU.S. Support
GUARANTEED LOWEST PRICES
FREE
SHIPPING
OVER $1500
*Excludes Commercial Products
DELIVERY TIME
3 - 10 BUSINESS DAYS
EXCLUDING WEEKENDS AND HOLIDAYS
PROFESSIONAL
U.S. SUPPORT
ADD TO CART FOR
GUARANTEED LOWEST PRICES
0% Interest
Orders $3000+ offered at checkout
No Credit Needed
Bad credit/no credit is OK - offered at checkout
Orders over $3000 get a
7 night luxury resort stay
Goodman 2 Ton Up To 16.5 SEER2 R32 High-Efficiency Cooling Only Condenser
Model Number
GLXS5BA2410
Dimensions
29" W x 29" D x 32" H
Documents
Warranty
Parts: 10 years
Goodman 60000 BTU 96% Efficient Gas Furnace - California & Colorado Ultra-Low NOx, Upflow / Horizontal Multi-Speed, R32
Model Number
GR9S960603BU
Dimensions
17-1/2" W x 28-7/8" D x 34-1/2" H
Documents
Limited Warranty
Parts: 10 years | Limited Replacement: 10 years
Goodman 2.5 Ton R32 Evaporator Coil With Internal TXV Upflow / Downflow
Model Number
CAPTA3022B3
Dimensions
17-1/2" W x 21" D x 22" H
Documents
Warranty
Parts: 10 years
AHRI Number
215380229
Goodman 2 Ton Up To 16.5 SEER2 R-32 Air Conditioner Condenser
Model: GLXS5BA2410
High-efficiency cooling performance designed for dependable home comfort and energy savings.
The Goodman GLXS5BA2410 air conditioner condenser provides 2 tons (24,000 BTU) of dependable cooling capacity for residential applications. Designed to deliver up to 16.5 SEER2 efficiency, this air conditioning unit helps homeowners stay comfortable while lowering energy usage and monthly utility costs.
Engineered for reliable operation and long-lasting performance, the GLXS5BA2410 utilizes environmentally friendly R-32 refrigerant and durable cabinet construction. Its advanced cooling technology and quality Goodman components make it an excellent choice for homeowners seeking efficient and affordable indoor comfort.
Features & Benefits
- 2 ton cooling capacity (24,000 BTU)
- Up to 16.5 SEER2 high-efficiency performance
- Designed for cooling-only air conditioning applications
- Uses environmentally friendly R-32 refrigerant
- Energy-efficient operation helps reduce utility costs
- Factory-installed filter drier for enhanced system protection
- Heavy-gauge galvanized steel cabinet construction
- Weather-resistant powder-coated finish
- Quiet and dependable cooling performance
- Copper tube and aluminum fin coil design for efficient heat transfer
- Compatible with matched Goodman indoor equipment
- AHRI Certified and ETL Listed
- Ideal for residential replacement and new construction applications
Goodman 60,000 BTU 96% AFUE Ultra-Low NOx Gas Furnace for California & Colorado Applications
Model: GR9S960603BU
High-efficiency heating performance with Ultra-Low NOx emissions and flexible installation options.
The Goodman GR9S960603BU is a 60,000 BTU gas furnace designed to deliver reliable, energy-efficient heating for residential applications. With up to 97% AFUE performance and a multi-speed ECM blower motor, this furnace helps maximize indoor comfort while reducing energy consumption. Its Ultra-Low NOx design meets strict California and Colorado emissions requirements, making it an excellent choice for homeowners seeking efficient and environmentally responsible heating.
Built with a heavy-duty stainless-steel tubular primary heat exchanger and a super-ferritic stainless-steel secondary heat exchanger, the GR9S960603BU is engineered for long-lasting durability and dependable operation. The versatile upflow and horizontal installation design, quiet operation, and advanced self-diagnostic controls make this furnace a practical solution for a wide range of replacement and new construction applications.
Features & Benefits
- 60,000 BTU input heating capacity
- Up to 97% AFUE high-efficiency performance
- Ultra-Low NOx emissions compliant with California and Colorado requirements
- Eligible for installation in SCAQMD and SJVUAPCD regulated areas
- Single-stage gas valve for dependable heating operation
- Multi-speed ECM blower motor for improved airflow performance and efficiency
- Heavy-duty stainless-steel tubular primary heat exchanger
- Super-ferritic stainless-steel secondary heat exchanger for enhanced durability
- Durable silicon nitride igniter for reliable startups
- Quiet multi-speed induced draft blower operation
- Self-diagnostic control board with LED fault code history
- Designed for upflow, horizontal left, or horizontal right installation
- Compatible with direct vent (2-pipe) and non-direct vent (1-pipe) venting applications
- Convenient left or right gas and electrical connections
- Fully insulated heat exchanger and blower compartment for quieter operation
- Heavy-gauge steel cabinet with durable finish
- Low cabinet air leakage design helps improve overall efficiency
- Compatible with R-32 cooling system applications
- AHRI Certified and ETL Listed
- Ideal for residential replacement and new construction heating applications
Goodman CAPTA3022B3 Cased Coil – 2–2.5 Ton, 17.5" Cabinet
Balanced comfort with reliable design
The Goodman CAPTA3022B3 offers 2–2.5 tons of capacity and features a 17.5-inch wide cabinet for flexible airflow. Designed for upflow or downflow installations, it provides reliable cooling and heating support.
Engineered with an aluminum coil and TXV, it is built to last and easy to maintain.
Features & Benefits
- 2–2.5 Ton nominal capacity
- 17.5" cabinet width for system flexibility
- All-aluminum coil for durability
- Factory-installed TXV ensures efficiency
- Designed for Goodman AC and heat pump systems
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST
