America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
11am - 8pm EST
- 2.5 ton - best for spaces between 1200 -1500 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- Best for mild to cold climates. The heat pump is the primary heat source and the gas furnace works for supplement heating when the temperature drops down to about 30 degrees or so
Goodman 2.5 Ton Dual Fuel Hybrid Heat Pump System – 80000 BTU California Low NOx Gas Furnace, 80% AFUE, 14.5 SEER2, Horizontal, R32
- Condenser: GLZS5BA3010
- Gas Furnace: GR9S800804BU
- Evaporator Coil: CHPTA3026B3
Furnace BTU Sizing Tonnage Calculator
Heating Square Footage Range by Climate Zone
| Region 1 | Region 2 | Region 3 | Region 4 | Region 5 |
| 30 - 35 BTU's per square foot | 35 - 40 BTU's per square foot | 40 - 45 BTU's per square foot | 45 - 50 BTU's per square foot | 50 - 60 BTU's per square foot |
- 2.5 ton - best for spaces between 1200 -1500 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- Best for mild to cold climates. The heat pump is the primary heat source and the gas furnace works for supplement heating when the temperature drops down to about 30 degrees or so
Free Shipping
Over $1500
*Excludes Commercial Products
DELIVERY TIME 3-10 BUSINESS DAYS
EXCLUDING WEEKENDS AND HOLIDAYS
ProfessionalU.S. Support
GUARANTEED LOWEST PRICES
FREE
SHIPPING
OVER $1500
*Excludes Commercial Products
DELIVERY TIME
3 - 10 BUSINESS DAYS
EXCLUDING WEEKENDS AND HOLIDAYS
PROFESSIONAL
U.S. SUPPORT
ADD TO CART FOR
GUARANTEED LOWEST PRICES
0% Interest
Orders $3000+ offered at checkout
No Credit Needed
Bad credit/no credit is OK - offered at checkout
Orders over $3000 get a
7 night luxury resort stay
Goodman 2.5 Ton Up To 16 SEER2 R32 High-Efficiency Heat Pump Condenser
Model Number
GLXS5BA3010
Dimensions
35-1/2" W x 35-1/2" D x 39-1/2" H
Documents
Warranty
Parts: 10 years
Goodman Ultra-Low Nox Furnace California | 80000 BTU 80% Efficient Gas Furnace Multi-Speed ECM | Upflow / Horizontal | R32
Model Number
GR9S800804BU
Dimensions
17-1/2" W x 28" D x 33-3/8" H
Documents
Limited Warranty
Heat Exchanger: Limited Lifetime | Parts: 10 years
Goodman 2.5 Ton R32 Evaporator Coil With Internal TXV Horizontal
Model Number
CHPTA3026B3
Dimensions
17-1/2" W x 21" D x 26" H
Documents
Warranty
Parts: 10 years
AHRI Number
215382581
GLZS5B Overview
Standard Features
- High-efficiency scroll compressor
- SmartShift® technology to ensure quiet reliable defrost
- Enhanced aluminum fin with coil - 5mm diameter copper tubes in 1.5 ton - 3.5 ton
- Enhanced aluminum fin coil with 7mm diameter copper tubes 4 - 5 ton
- Single-speed PSC condenser fan motor
- Factory-installed suction-line accumulator
- Factory-installed compressor crankcase heater
- Factory-installed high-capacity muffler
- High- and low-pressure switches
- Service valves with sweat connections and easy access to gauge ports
- Fully charged for 15’ of tubing length
- Ground lug connection
- Fully enclosed contactor
- Capacitor with extended life
- AHRI Certified; ETL Listed
Cabinet Features
- Removable grille style top design compliant with UL 60335-2-40
- Steel louver coil guard
- Heavy-gauge galvanized-steel cabinet
- Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
- Top and side maintenance access
- Single panel access to controls with space provided for field-installed accessories
- When properly anchored, meets the 2023 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
Goodman GR9S800804BU Gas Furnace – 80,000 BTU, 80% AFUE, Ultra-Low NOx
Reliable, eco-conscious heating for larger homes
The Goodman GR9S800804BU delivers 80,000 BTU of heating capacity with 80% AFUE efficiency, making it a dependable choice for larger homes. With Ultra-Low NOx emissions, it complies with strict California environmental standards while still providing powerful performance.
This model features a 4-burner configuration, a durable aluminized-steel heat exchanger, and a 10" x 8" blower motor for reliable airflow. Its self-diagnostics and quiet operation make it a homeowner-friendly option backed by Goodman’s trusted warranty.
Features & Benefits
- 80,000 BTU input / 64,000 BTU output
- 80% AFUE efficiency helps manage utility costs
- Ultra-Low NOx compliant furnace
- 4-burner heating system
- 10" x 8" blower for dependable airflow
- ECM blower motor ensures quiet comfort
- Durable construction with steel cabinet
- Backed by Goodman’s warranty for peace of mind
Goodman CHPTA3026B3 Horizontal Coil – 2.5 Ton, 17.5" Cabinet
Reliable comfort for mid-sized systems
The Goodman CHPTA3026B3 is built for 2.5-ton residential systems and comes in a 17.5-inch cabinet, making it versatile for horizontal installations. Its durable coil and TXV design provide precise performance and efficiency.
With Goodman’s rugged cabinet design, this coil is built to withstand long-term use while delivering reliable comfort.
Features & Benefits
- 2.5 Ton nominal capacity
- 17.5" cabinet width
- All-aluminum coil design
- Factory-installed TXV for efficiency
- Optimized for R-32 refrigerant systems
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST
