America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
11am - 8pm EST
- 3.5 ton - best for spaces between 1700- 2100 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Best if you already have a self-contained outdoor unit in place now or if you have no place for an indoor unit (air handler/furnace)
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
MrCool 3.5 Ton 13.4 SEER2 Gas/Electric Package Unit - 90000 BTU Gas Heat, 81% AFUE, Multi-Positional, R454B, VersaPro Series
Model #: MPG42S090MO13C
AC Size Calculator | Get BTU’s and Tonnage – Free and Easy!
Welcome! START HERE:
Use the sizing calculator below to calculate your required system size.
Follow these easy steps:
- 3.5 ton - best for spaces between 1700- 2100 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Best if you already have a self-contained outdoor unit in place now or if you have no place for an indoor unit (air handler/furnace)
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
As low as $6,311.00
Free Shipping
Over $1500
*Excludes Commercial Products
DELIVERY TIME 5-10 BUSINESS DAYS
EXCLUDING WEEKENDS AND HOLIDAYS
ProfessionalU.S. Support
GUARANTEED LOWEST PRICES
FREE
SHIPPING
OVER $1500
DELIVERY TIME
5 - 10 BUSINESS DAYS, EXCLUDING WEEKENDS AND HOLIDAYS
PROFESSIONAL
U.S. SUPPORT
ADD TO CART FOR
GUARANTEED LOWEST PRICES
0% Interest
Orders $3000+ offered at checkout
No Credit Needed
Bad credit/no credit is OK - offered at checkout
Orders over $3000 get a
7 night luxury resort stay
MrCool 3.5 Ton 13.4 SEER2 Gas/Electric Package Unit - 90000 BTU Gas Heat, 81% AFUE, Multi-Positional, R454B, VersaPro Series
Model Number
MPG42S090MO13C
Dimensions
51.56" W x 49.75" D x 44.81" H
Documents
Limited Warranty
Parts: 5 years | Heat Exchanger: 20 years
AHRI Number
217334302
MRCOOL 3.5 Ton 13.4 SEER2 Gas/Electric Package Unit – 90,000 BTU Heat, 81% AFUE, VersaPro Series (MPG42S090MO13C)
High-capacity performance for larger residential spaces
The MRCOOL MPG42S090MO13C 3.5 Ton Packaged Unit provides powerful comfort with 40,000 BTU cooling capacity and 90,000 BTU heating. Designed for larger homes, this model brings dependable performance and high airflow (up to 1400 CFM) for exceptional climate control.
This unit features an ECM blower motor, microchannel condenser coil, quiet PSC fan motor, and rugged power-painted steel cabinet. With eco-friendly R454B refrigerant and single-stage operation, the unit balances performance and efficiency.
Features & Benefits
- 3.5 ton / 40,000 BTU cooling capacity
- 90,000 BTU gas heat with 72,000 BTU output
- Multi-positional installation options
- ECM blower motor rated at 1400 CFM
- PSC outdoor fan motor for long-lasting performance
- High-efficiency microchannel condenser coil
- R454B refrigerant with lower environmental impact
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST