Use Code FALL3 for an Extra 3% Off
Free Shipping On Orders Over $1500
America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- 5 ton - best for spaces between 2400- 3000 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Heat pumps are all electric and good for mild and cold climates.
- If you have an indoor furnace, or air handler, along with an outdoor AC unit, this system will serve as a replacement for both.
Goodman 5 Ton 16.6 SEER2 Side Discharge Heat Pump Split System - 115V Air Handler, Not Compatible with Heat Kits, R32
- Condenser: GZV6SA6010
- Air Handler: AHVE60DP0300
- Thermostat (Optional): Choose a compatible proprietary Goodman or Daikin communicating thermostat
AC Size Calculator | Get BTU’s and Tonnage – Free and Easy!
Welcome! START HERE:
Use the sizing calculator below to calculate your required system size.
Follow these easy steps:
- 5 ton - best for spaces between 2400- 3000 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Heat pumps are all electric and good for mild and cold climates.
- If you have an indoor furnace, or air handler, along with an outdoor AC unit, this system will serve as a replacement for both.
Goodman 5 Ton Variable-Speed Inverter Side Discharge Heat Pump – Up to 16.2 SEER2, High-Efficiency, R32
Model Number
GZV6SA6010
Dimensions
37" W x 12-5/8" D x 39" H
Documents
Limited Warranty
Parts: 10 years
Goodman 5 Ton R32 Multi-Position, Variable-Speed, ECM-Based Air Handler With Internal EEV (115V)
Model Number
AHVE60DP0300
Dimensions
24-1/2" W x 21" D x 58" H
Documents
Limited Warranty
Parts: 10 years
Goodman GTST Connected Thermostat
Model Number
GTST-CW-WH-A
Dimensions
3.3" W x 3.3" H x 1.04" D
Documents
Limited Warranty
Parts: 5 years
Daikin One Touch Smart Thermostat
Model Number
DTST-TOU-A
Dimensions
11-9/16" W x 13-3/4" D x 7-1/16" H
Documents
Limited Warranty
Parts: 12 years
AHRI Number
215429797
Goodman GZV6SA6010 5 Ton Variable-Speed Side Discharge Heat Pump
Maximum-capacity inverter comfort for large homes and high-demand applications
The Goodman GZV6SA6010 is a 5-ton (60,000 BTU) variable-speed heat pump engineered for large homes and demanding comfort needs. Its inverter-driven technology delivers smooth, efficient heating and cooling while minimizing temperature swings and operating noise.
With a compact side-discharge design and all-region approval, this system offers powerful performance, flexible installation, and modern efficiency using environmentally friendly R-32 refrigerant.
- 5 ton (60,000 BTU) heating and cooling capacity
- Variable-speed inverter compressor
- Side-discharge space-saving design
- R-32 refrigerant
- All-region approved heat pump
- Designed for large homes and high-load applications
High-Capacity Airflow Built for Whole-Home Comfort
5 Ton Capacity. Variable-Speed Control. Modern R32 Technology.
The Goodman AHVE60DP0300 delivers 5 tons of indoor airflow capacity for compatible Goodman R32 communicating systems. Designed for higher-capacity residential applications, its variable-speed ECM blower provides responsive airflow control while operating from 115V single-phase power.
An all-aluminum evaporator coil, internal electronic expansion valve (EEV), and factory-installed R32 refrigerant sensor support modern R32 system operation, while the 24.5-inch-wide SmartFrame™ cabinet provides the space required for this higher-capacity indoor unit.
Key Features
- 5 ton nominal capacity
- 115V single-phase operation
- Variable-speed communicating ECM blower motor
- Internal electronic expansion valve (EEV)
- All-aluminum evaporator coil
- Factory-installed R32 refrigerant sensor
- Optimized for R32 refrigerant
- Horizontal or vertical installation
- Improved humidity and comfort control
- 24.5-inch-wide rigid SmartFrame™ cabinet
- 21-inch cabinet depth
- Tool-less filter access
- AHRI certified and ETL listed
High-Capacity Variable-Speed Airflow
The variable-speed ECM blower is designed to provide constant airflow across varying static-pressure conditions. This responsive airflow management helps the AHVE60DP0300 meet the demands of a 5 ton system while supporting consistent air distribution, humidity management, and indoor comfort.
Precise Refrigerant Control with an Internal EEV
A factory-installed electronic expansion valve precisely regulates refrigerant flow for compatible cooling and heat pump applications. Integrating the EEV into the air handler helps coordinate refrigerant management as system demand and operating conditions change.
Built for Modern R32 Systems
The AHVE60DP0300 is optimized for R32 refrigerant and features an all-aluminum evaporator coil along with a factory-installed R32 refrigerant sensor designed for the lifespan of the coil.
Flexible Installation for Higher-Capacity Systems
The 24.5-inch-wide SmartFrame™ cabinet supports horizontal or vertical installation while maintaining a 21-inch cabinet depth. Foil-faced insulation, screw-less sides and back, and a thermoplastic drain pan with secondary drain connections help reduce and manage condensation in demanding installation environments.
Communicating Comfort with Helpful Diagnostics
When paired with compatible communicating equipment, the AHVE60DP0300 supports enhanced airflow, humidity, and comfort management. Integrated diagnostics include a CFM indicator and recall of the six most recent faults to assist with setup, troubleshooting, and service.
Important Electric Heat Compatibility
The AHVE60DP0300 is not compatible with electric heater kits. Supplemental electric heat strips cannot be added to this air handler.
Complete your compatible high-capacity Goodman R32 system with the AHVE60DP0300 for 5 tons of variable-speed airflow, communicating comfort control, and flexible multi-position installation.
GTST Overview
The Goodman GTST connected thermostat is designed to deliver the ultimate inverter experience when used with the Goodman SD system. Compatible with all Goodman communicating unitary equipment, it can connect to the Goodman Home app via Wi-Fi, allowing control from an iOS or Android phone or tablet. Additionally, the GTST supports voice control with Amazon Alexa or Google Assistant. For enhanced efficiency and comfort, homeowners can program up to four schedule events each day on a seven-day schedule.
Standard Features
- Compact, non-intrusive design suitable for most interior environments
- Multifunction push buttons labeled for mode, fan, set-point up, set-point down
- Wi-Fi-enabled connected thermostat that works with Goodman GTST home app (iOS and Android)
- Voice control by Amazon Alexa and Google Assistant
- Programmable schedule
- Built-in temperature and humidity sensors
- Indoor unit Control: Mode (Auto/Heat/Cool/Emergency Heat), Setpoint (Dual/Single), Fan Speed, Fan On/Auto (with minimum run time)
- LED Mode indicator for heating and cooling
- Dehumidification function (setup with Goodman GTST home app)
- Error and maintenance notifications
- Control and comfort functions: Away mode and geo-fencing
- Over-the-air software update capable (requires Wi-Fi connection)
- Compatible with Cloud Services (Future)
- Setup is possible within the cloud services app, via the commissioning tool. Setup using buttons is possible, but not recommended.
Technical Specifications
- Backlit, 3.5 inch MVA TFT LCD display
- Bi-directional communications protocol for controlling HVAC system
- Multi-language support: English, Spanish, French (Goodman GTST home app only)
- 1 Auxiliary output configurable as a secondary heat source, dehumidifier. or humidifier
- FCC Certified/UL Listed
- An optional trim plate (PSPAC-WPM-L) is available.
One Touch Overview - DTST-TOU-A
The Daikin One Touch smart thermostat is the latest addition to the Daikin One ecosystem, joining the Daikin One smart thermostat as a control solution for Daikin's communicating unitary equipment.
Standard Features
- Simple, elegant industrial design
- Capacitive touchscreen user interface
- Wi-Fi-enabled smart thermostat with iOS and Android app control
- Voice control by Amazon Alexa and Google Assistant
- Control and comfort functions: Away mode, geo-fencing
- Outdoor environment monitoring: outdoor temperature, outdoor humidity, and weather forecast
- Compatible with Daikin One home air monitor for IAQ visualization
- Error and service notifications
- Multi-language support: English, Spanish, French
- Programmable 4-event schedule with adjustable hold function
- Compatible with Daikin One cloud services
- Open API compatible for home control systems such as Control4 and Crestron
- Compliant to California Title 24 (OCST listed), FCC Certified, and UL Listed
Technical Specifications
- Capacitive touch screen
- Backlit, 3.5 inch MVA TFT LCD display
- Bi-directional communications protocol for controlling HVAC system
- Bubble level (to aid installation)
- 640 × 480 pixels × 24 bit RGB (full color screen)
- Wi-Fi
- Operation Temperature: 32°F to 120°F
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST