America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
11am - 8pm EST
- 1.5 ton - best for spaces between 750 - 1000 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- If you have an indoor furnace, or air handler, along with an outdoor AC unit, this system will serve as a replacement for both.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- Low NOx and Ultra-Low NOx refers to California (only) emission limits on nitrogen oxides released by gas furnaces and are determined by local EPA standards and will vary for each type of gas furnace.
Goodman 1.5 Ton 15.2 SEER2 AC & Gas Furnace System – Single Stage Variable-Speed, 60000 BTU Ultra-Low NOx Gas Furnace, 96% AFUE, Downflow, R32
- Condenser: GLXS5BA1810
- Gas Furnace: CDVS960603BU
- Evaporator Coil: CAPTA3026B3
Furnace BTU Sizing Tonnage Calculator
Heating Square Footage Range by Climate Zone
| Region 1 | Region 2 | Region 3 | Region 4 | Region 5 |
| 30 - 35 BTU's per square foot | 35 - 40 BTU's per square foot | 40 - 45 BTU's per square foot | 45 - 50 BTU's per square foot | 50 - 60 BTU's per square foot |
- 1.5 ton - best for spaces between 750 - 1000 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- If you have an indoor furnace, or air handler, along with an outdoor AC unit, this system will serve as a replacement for both.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- Low NOx and Ultra-Low NOx refers to California (only) emission limits on nitrogen oxides released by gas furnaces and are determined by local EPA standards and will vary for each type of gas furnace.
Free Shipping
Over $1500
*Excludes Commercial Products
DELIVERY TIME 3-10 BUSINESS DAYS
EXCLUDING WEEKENDS AND HOLIDAYS
ProfessionalU.S. Support
GUARANTEED LOWEST PRICES
FREE
SHIPPING
OVER $1500
*Excludes Commercial Products
DELIVERY TIME
3 - 10 BUSINESS DAYS
EXCLUDING WEEKENDS AND HOLIDAYS
PROFESSIONAL
U.S. SUPPORT
ADD TO CART FOR
GUARANTEED LOWEST PRICES
0% Interest
Orders $3000+ offered at checkout
No Credit Needed
Bad credit/no credit is OK - offered at checkout
Orders over $3000 get a
7 night luxury resort stay
Goodman 1.5 Ton Up To 16.5 SEER2 R32 High-Efficiency Cooling Only Condenser
Model Number
GLXS5BA1810
Dimensions
26" W x 26" D x 27" H
Documents
Warranty
Parts: 10 years
Goodman 60000 BTU 96% AFUE Gas Furnace - Single Stage, Variable-Speed, Downflow, Ultra-Low NOx, 17-1/2" Width
Model Number
CDVS960603BU
Dimensions
17-1/2" W x 28-3/4" D x 34-1/2" H
Documents
Warranty
Parts: 10 years | Unit Replacement: 10 years
Goodman 2.5 Ton R32 Evaporator Coil With Internal TXV Upflow / Downflow
Model Number
CAPTA3026B3
Dimensions
17-1/2" W x 21" D x 26" H
Documents
Warranty
Parts: 10 years
AHRI Number
217484642
GLXS5B Overview
Standard Features
- High-Efficiency Scroll Compressor
- Factory-installed filter drier
- Fully charged for 15' of tubing length
- 5mm diameter copper tube/ enhanced aluminum fin coil
- Factory-installed filter drier
- Sweat connection service valves with easy access to gauge ports
- Enclosed contactor
- High-pressure switch
- Ground lug connection
- Capacitors with extended life
- AHRI Certified
- ETL Listed
Cabinet Features
- Removable grille-style top design compliant with UL 60335-2-40
- Venturi for increased velocity of airflow
- Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
- Wire fan discharge grille
- Steel louver coil guard
- Top and side maintenance access
- Single-panel access to controls with space provided for field-installed accessories
- When properly anchored, meets the 2023 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
Goodman 60,000 BTU 96% AFUE Gas Furnace – CDVS960603BU
High-efficiency, Ultra-Low NOx downflow heating engineered for maximum comfort and savings
The Goodman CDVS960603BU delivers outstanding comfort and efficiency with its 60,000 BTU heating output and an impressive 96% AFUE, allowing homeowners to significantly reduce heating costs compared to standard furnaces. Its downflow configuration makes it ideal for installations in closets, attics, or areas where air is supplied from above, and the 17.5-inch cabinet width ensures easy placement in tight spaces.
Equipped with a variable-speed ECM blower and both primary and secondary stainless-steel heat exchangers, this Ultra-Low NOx model complies with strict SCAQMD and SJVUAPCD emission standards while maintaining whisper-quiet, dependable performance. With multi-position venting options, LED diagnostics, and durable cabinet construction, this furnace is engineered for long-lasting reliability and modern home efficiency.
- 60,000 BTU heating capacity for small to mid-sized homes
- 96% AFUE provides exceptional energy savings and reduced utility bills
- Variable-speed ECM blower motor delivers quiet, consistent airflow
- Single-stage gas valve with reliable, steady heat output
- Ultra-Low NOx compliant (≤14 ng/J), approved for California districts
- Stainless-steel primary and super-ferritic secondary heat exchangers for long-term durability
- Downflow configuration with optional horizontal installation
- Top and optional side venting (2”–3” PVC) for flexible installations
- Self-diagnostic control board with constant memory and LED fault display
- Quiet induced draft blower improves overall operating sound levels
- Compact 17.5” cabinet width for space-constrained installation sites
Goodman CAPTA3026B3 Cased Coil – 2.5 Ton, 17.5" Cabinet
Durable coil for mid-size systems
The Goodman CAPTA3026B3 provides 2.5 tons of heating and cooling support in a 17.5-inch wide cabinet. Built with an all-aluminum coil and factory-installed TXV, it ensures efficiency and long-lasting performance.
This model is designed for dependable system matching with Goodman air conditioners and heat pumps.
Features & Benefits
- 2.5 Ton nominal capacity
- 17.5" cabinet width for versatile installations
- All-aluminum coil design
- Factory-installed TXV included
- Rugged cabinet with protective coating
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST
