Use Code 3offACD for an Extra 3% Off
Free Shipping On Orders Over $1500
America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- 2 ton - best for spaces between 1000 - 1200 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Good for extreme southern climates with very low heating demand such as south Florida and south Texas (otherwise a heat pump is the best option)
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
Intertherm 2 Ton AC & Upflow Electric Furnace System with Coil Cabinet for Mobile Homes - Choose a Compatible Furnace, R454B
- Condenser: HSA4ME5M1SN24K
- Electric Furnace: 10kW - 15kW Options
- Uncased Coil: C85DAMX24U-B
- 2 ton - best for spaces between 1000 - 1200 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Good for extreme southern climates with very low heating demand such as south Florida and south Texas (otherwise a heat pump is the best option)
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
As low as $4,700.49 was $4,821.00
Intertherm 2 Ton 14.3 SEER2 Air Conditioner Condenser for Mobile Homes, R454B
Model Number
HSA4ME5M1SN24K
Dimensions
31.75" W x 31.75" D x 29.25" H
Documents
Warranty
Standard: Parts: 1 year | 5 years
Registered: Parts: 5 years | 10 years
Intertherm 10 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7ED-B010K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 12 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7ED-B012K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 15 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7ED-B015K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 2 Ton Uncased A-Vertical Evaporator Coil With TXV for Mobile Home - 19-3/4-inch Cabinet Width, R454B
Model Number
C85DAMX24U-B
Dimensions
18-1/8" W x 19-1/2" D x 18" H
Documents
Warranty
Parts: 3 year
Reliable Cooling Built for the Needs of Factory-Built Homes
Efficient 2-ton cooling in a durable outdoor unit designed for lasting home comfort.
The Intertherm HSA4ME5M1SN24K is a 2-ton, 24,000 BTU split-system air conditioner designed to provide dependable cooling for compatible manufactured and modular home HVAC systems. Rated at 14.3 SEER2, this outdoor condenser helps maintain comfortable indoor temperatures while using energy more efficiently than older, lower-efficiency equipment.
For homeowners familiar with the former Revolv product line, Intertherm now carries that trusted manufactured-home HVAC legacy forward. The HSA4ME series is engineered specifically for factory-built housing and features a powder-coated galvanized-steel cabinet that helps protect the outdoor unit against corrosion, fading, chipping, and scratching.
- 2-ton cooling capacity: Provides approximately 24,000 BTUs of cooling for properly sized homes and applications.
- 14.3 SEER2 efficiency: Delivers efficient cooling that can help reduce energy use compared with older air-conditioning equipment.
- R454B refrigerant: Uses a current-generation refrigerant with a lower global warming potential than R410A.
- Factory-built home design: Engineered for compatible manufactured and modular home HVAC applications.
- Durable outdoor cabinet: Powder-coated galvanized steel helps protect the unit from outdoor weather and everyday wear.
- Matched-system compatibility: Designed to operate with an approved Intertherm indoor coil and furnace for dependable system performance.
The Intertherm HSA4ME5M1SN24K is a practical replacement or new-system choice for homeowners who need dependable 2-ton cooling in a properly matched manufactured-home HVAC system. Professional sizing and installation are required to confirm compatibility and achieve the intended comfort and efficiency.
Efficient Upflow Electric Comfort in a Space-Saving Cabinet
Reliable electric heating for homes that distribute conditioned air through overhead ductwork.
The Intertherm E7EU Series Electric Furnace is designed for compatible manufactured and mobile homes with upflow duct systems. Heated air moves upward from the furnace into ductwork above the unit, making the E7EU a suitable choice when the home’s existing HVAC layout requires an upflow configuration.
Heating capacities from 10 to 23 kW provide options for different home sizes, climates and heating loads. The compact cabinet is designed for factory-built housing applications, while front service access helps qualified technicians reach the internal components for installation and maintenance.
- Upflow Configuration: Delivers heated air into ductwork located above the furnace.
- Multiple Heating Capacities: Available in 10, 12, 15, 17, 20 and 23 kW models.
- All-Electric Heating: Does not require an onsite gas burner or combustion vent.
- Factory-Built Housing Design: Sized for common manufactured-home installation spaces.
- Accessible Cabinet: Front access supports professional service and inspection.
- Matched Cooling Capability: Can be paired with approved air-conditioning components for year-round comfort.
The Intertherm E7EU Series was formerly offered under the Revolv brand. Verify the home’s airflow orientation, electrical requirements, heating load and approved component matches before selecting a furnace.
Efficient Indoor Cooling Performance for Factory-Built Homes
A compact 2-ton indoor coil designed to support dependable comfort and proper refrigerant control.
The Intertherm C85DAMX24U-B is a 2-ton, 24,000 BTU uncased indoor evaporator coil designed for compatible manufactured and modular home HVAC systems. Installed with an approved outdoor air conditioner or heat pump and furnace, the coil transfers heat between the refrigerant and indoor air to help cool or heat the home.
For homeowners familiar with the former Revolv product line, Intertherm now carries that manufactured-home HVAC tradition forward. This vertical A-coil uses micro-channel technology and includes a factory-installed thermal expansion valve, commonly called a TXV, to regulate refrigerant flow as operating conditions change.
- 2-ton capacity: Supports properly matched systems with approximately 24,000 BTUs of nominal capacity.
- R454B compatibility: Designed for current R454B air-conditioning and heat-pump systems.
- Micro-channel coil: Provides efficient heat transfer through a compact indoor coil design.
- Factory-installed TXV: Precisely controls refrigerant flow to support consistent system performance and efficiency.
- Vertical A-coil configuration: Designed for installation with compatible manufactured-home furnace and indoor equipment arrangements.
- Uncased construction: Fits inside an approved furnace or coil cabinet rather than adding a separate exterior cabinet.
- Down-turn connections: Braze connections are positioned to support the intended manufactured-home installation layout.
The C85DAMX24U-B is a practical indoor-coil choice when building or replacing a properly matched 2-ton Intertherm system. A qualified HVAC professional must verify the outdoor unit, furnace, A2L safety components, airflow, and certified equipment match before installation.
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST