Use Code 3offACD for an Extra 3% Off
Free Shipping On Orders Over $1500
America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Good for extreme southern climates with very low heating demand such as south Florida and south Texas (otherwise a heat pump is the best option)
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
Intertherm 3 Ton Heat Pump & Upflow Electric Furnace System with Coil Cabinet for Mobile Homes - Choose a Compatible Furnace, R454B
- Condenser: HSH4ME5M1SP36K
- Electric Furnace Options: 12kW - 17kW
- Uncased Coil: C85DAMX3036U-B
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Good for extreme southern climates with very low heating demand such as south Florida and south Texas (otherwise a heat pump is the best option)
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
As low as $5,454.16 was $5,594.00
Intertherm 3 Ton 14.3 SEER2 Heat Pump for Mobile Homes, R454B
Model Number
HSH4ME5M1SP36K
Dimensions
31.75" W x 31.75" D x 45" H
Documents
Warranty
Standard: Parts: 1 year | 5 years
Registered: Parts: 5 years | 10 years
Intertherm 12 kW Electric Furnace for Mobile Homes - Upflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7EU-B012K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 15 kW Electric Furnace for Mobile Homes - Upflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7EU-B015K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 17 kW Electric Furnace for Mobile Homes - Upflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7EU-B017K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 2.5-3 Ton Uncased A-Vertical Evaporator Coil With TXV for Mobile Home - 19-3/4-inch Cabinet Width, R454B
Model Number
C85DAMX3036U-B
Dimensions
18-1/8" W x 19-1/3" D x 18" H
Documents
Warranty
Parts: 3 year
Balanced Year-Round Comfort for Your Manufactured Home
Efficient 3-ton heating and cooling keeps your indoor environment comfortable across changing seasons.
The Intertherm HSH4ME5M1SP36K is a 3-ton, 36,000 BTU split-system heat pump designed around the specialized HVAC requirements of compatible manufactured and modular homes. It provides dependable air conditioning during hot weather and reverses operation to supply energy-efficient heating when outdoor temperatures become cooler.
For homeowners who previously knew this category of equipment under the Revolv name, Intertherm carries that manufactured-home heating and cooling legacy forward. The HSH4ME combines a 14.3 SEER2 cooling rating with a 7.5 HSPF2 heating rating. A scroll compressor supports smooth, quieter operation, while the protected outdoor cabinet is built to withstand exposure to demanding weather.
- 3-ton capacity: Supplies approximately 36,000 BTUs of heating and cooling for correctly sized applications.
- Heating and cooling operation: Provides two essential home-comfort functions from one outdoor unit.
- 14.3 SEER2 cooling efficiency: Helps manage electricity use while maintaining comfortable summer temperatures.
- 7.5 HSPF2 heating efficiency: Measures efficient seasonal performance when operating in heating mode.
- R454B refrigerant: Uses a lower-global-warming-potential refrigerant developed for modern HVAC systems.
- Scroll compressor: Helps deliver dependable performance with reduced operating noise.
- Durable outdoor design: Guardian Seal and protective cabinet construction help resist weather and physical wear.
- Matched Intertherm system: Designed for use with approved C85DA indoor coils and compatible furnace equipment.
The HSH4ME5M1SP36K is a strong year-round comfort option when a professional load calculation confirms that 3-ton capacity is appropriate for the home. Proper component matching and professional installation are essential for reliable operation and intended efficiency.
Efficient Upflow Electric Comfort in a Space-Saving Cabinet
Reliable electric heating for homes that distribute conditioned air through overhead ductwork.
The Intertherm E7EU Series Electric Furnace is designed for compatible manufactured and mobile homes with upflow duct systems. Heated air moves upward from the furnace into ductwork above the unit, making the E7EU a suitable choice when the home’s existing HVAC layout requires an upflow configuration.
Heating capacities from 10 to 23 kW provide options for different home sizes, climates and heating loads. The compact cabinet is designed for factory-built housing applications, while front service access helps qualified technicians reach the internal components for installation and maintenance.
- Upflow Configuration: Delivers heated air into ductwork located above the furnace.
- Multiple Heating Capacities: Available in 10, 12, 15, 17, 20 and 23 kW models.
- All-Electric Heating: Does not require an onsite gas burner or combustion vent.
- Factory-Built Housing Design: Sized for common manufactured-home installation spaces.
- Accessible Cabinet: Front access supports professional service and inspection.
- Matched Cooling Capability: Can be paired with approved air-conditioning components for year-round comfort.
The Intertherm E7EU Series was formerly offered under the Revolv brand. Verify the home’s airflow orientation, electrical requirements, heating load and approved component matches before selecting a furnace.
Purpose-Built Indoor Cooling for 3.5-Ton Manufactured-Home Systems
A compact micro-channel coil engineered specifically for approved air-conditioning applications.
The Intertherm C85DAMX42U-B is a 3.5-ton, 42,000 BTU uncased indoor evaporator coil designed for compatible manufactured and modular home air-conditioning systems. This model is intended for cooling-only applications and should be paired with an approved Intertherm air conditioner and compatible furnace.
For customers who previously knew this equipment family under the Revolv name, Intertherm carries that manufactured-home HVAC heritage forward. The coil uses a vertical micro-channel A-coil design and a factory-installed TXV to regulate R454B refrigerant flow, supporting dependable cooling and efficient system operation.
- 3.5-ton cooling capacity: Supports approved air-conditioning systems with approximately 42,000 BTUs of nominal capacity.
- Cooling-only application: Designed for compatible split-system air conditioners rather than heat-pump installations.
- R454B compatibility: Engineered for current R454B refrigerant systems.
- Micro-channel construction: Provides efficient indoor heat transfer in a compact coil assembly.
- Factory-installed TXV: Controls refrigerant flow to help the air conditioner perform consistently across changing conditions.
- Uncased vertical design: Installs within an approved manufactured-home furnace or coil cabinet.
- Manufactured-home fit: Designed around the specialized indoor equipment configuration of factory-built housing.
The C85DAMX42U-B is a strong replacement or new-system option when a certified 3.5-ton cooling-only match calls for this exact coil. It is not interchangeable with the similarly sized C85DAMX43U-B heat-pump coil; a qualified HVAC professional should verify the complete equipment match before ordering.
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST