America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Good for extreme southern climates with very low heating demand such as south Florida and south Texas (otherwise a heat pump is the best option)
Daikin 10 Ton Commercial Two-Stage Air Conditioner & Electric Heat Split System - 208/230V 3-Phase, R32
- Condenser: DC6TE12030
- Air Handler: DAQ12033
- Optional Electric Heat: Select a compatible electric heat kit for supplemental heating
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Good for extreme southern climates with very low heating demand such as south Florida and south Texas (otherwise a heat pump is the best option)
As low as $12,855.06
Daikin 10 Ton Commercial Split System Two-Stage Air Conditioner - 208/230V 3-Phase, R32
Model Number
DC6TE12030
Dimensions
35-1/2" W x 35-1/2" D x 41-1/2" H
Documents
Limited Warranty
Parts: 5 years
Daikin 10 Ton Multi-Position Commercial Air Handler - 208/230V 3-Phase, R32
Model Number
DAQ12033
Dimensions
60-15/32" W x 48-3/32" D x 24-3/16" H
Documents
Limited Warranty
Parts: 5 years
Daikin Electric Heat Kits for DAQ Commercial Air Handlers - 208/230V 3-Phase
Large-Capacity Two-Stage Commercial Air Conditioner with R-32 Refrigerant
Model: DC6TE12030
10 tons of high-performance cooling designed for larger commercial buildings.
The Daikin DC6TE12030 commercial split system air conditioner delivers 10 tons (118,000 BTU) of cooling capacity for larger commercial applications requiring dependable comfort and energy-efficient operation. Designed for 208/230V three-phase power, this unit features a two-stage tandem compressor system that helps provide improved temperature control and reduced energy consumption during partial load conditions. The system delivers up to 16.4 IEER performance and utilizes environmentally responsible R-32 refrigerant.
Built to withstand demanding commercial environments, the DC6TE12030 includes a rugged galvanized steel cabinet, steel coil guards, copper tube/aluminum fin coil construction, factory-installed filter drier, and integrated pressure protection switches. Its quiet top-discharge operation and durable design make it an excellent solution for schools, office buildings, retail facilities, and other large commercial spaces.
Features & Benefits
- 10 ton commercial split system air conditioner
- 118,000 BTU cooling capacity
- 208/230V three-phase electrical configuration
- Up to 16.4 IEER efficiency
- R-32 refrigerant technology
- Two-stage tandem compressor design
- Quiet top-discharge operation
- Copper tube and aluminum fin condenser coil
- Brass liquid and suction service valves
- Factory-installed filter drier
- High- and low-pressure safety switches
- Heavy-gauge galvanized steel cabinet construction
- Steel louver coil protection
- AHRI Certified and ETL Listed
- Designed for larger commercial HVAC applications
Commercial Multi-Position Air Handler for 10 Ton Split System Applications
Powerful commercial airflow performance for larger buildings and demanding applications.
The Daikin DAQ12033 is a 10 ton commercial air handler designed to support high-capacity split system installations in offices, schools, retail centers, light industrial facilities, and other commercial buildings. Operating on 208/230V three-phase power, this air handler delivers dependable airflow and efficient indoor comfort throughout the year.
Designed with dual direct-drive blower motors, advanced coil construction, and a rugged insulated cabinet, the DAQ12033 combines durability with installation flexibility. Its multi-position design allows adaptation to a variety of commercial HVAC layouts while helping maintain reliable performance and serviceability.
Features & Benefits
- 10 ton commercial air handler capacity
- Compatible with commercial split system air conditioners and heat pumps
- 208/230V three-phase electrical configuration
- Multi-position installation flexibility
- Dual 5-speed direct-drive blower motors
- Nominal airflow up to 4,000 CFM
- Copper tube and aluminum fin evaporator coils
- Dual thermal expansion valves (TXVs)
- R-32 refrigerant compatibility
- Integrated R-32 leak mitigation system
- Heavy-gauge galvanized steel cabinet construction
- Fully insulated cabinet helps improve efficiency
- Built-in filter rack with included 2-inch filters
- Removable access panels for simplified servicing
- AHRI Certified and ETL Listed
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST