America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- 1.5 ton - best for spaces between 750 - 1000 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- If you have an indoor furnace, or air handler, along with an outdoor AC unit, this system will serve as a replacement for both.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- Low NOx and Ultra-Low NOx refers to California (only) emission limits on nitrogen oxides released by gas furnaces and are determined by local EPA standards and will vary for each type of gas furnace.
Goodman 1.5 Ton 18.5 SEER2 Variable-Speed Inverter AC & Gas Furnace System - Two-Stage Variable-Speed 60000 BTU 80% AFUE Low NOx Gas Furnace, Horizontal, R32
- Condenser: GXV6SS1810
- Gas Furnace: GRVT800604BX
- Evaporator Coil: CHPEA2422B3
- Thermostat (Optional): Choose a compatible proprietary Goodman or Daikin communicating thermostat
Furnace BTU Sizing Tonnage Calculator
Heating Square Footage Range by Climate Zone
| Region 1 | Region 2 | Region 3 | Region 4 | Region 5 |
| 30 - 35 BTU's per square foot | 35 - 40 BTU's per square foot | 40 - 45 BTU's per square foot | 45 - 50 BTU's per square foot | 50 - 60 BTU's per square foot |
- 1.5 ton - best for spaces between 750 - 1000 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- If you have an indoor furnace, or air handler, along with an outdoor AC unit, this system will serve as a replacement for both.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- Low NOx and Ultra-Low NOx refers to California (only) emission limits on nitrogen oxides released by gas furnaces and are determined by local EPA standards and will vary for each type of gas furnace.
Goodman 1.5 Ton Up to 17.2 SEER2 Variable-Speed Inverter AC Side Discharge Condenser – R32
Model Number
GXV6SS1810
Dimensions
36-5/8" W x 13-3/4" D x 27-3/8" H
Documents
Limited Warranty
Parts: 10 years | Compressor: Limited Lifetime
Goodman 60000 BTU 80% Efficiency Two Stage Gas Furnace | Variable-Speed ECM Upflow / Horizontal | Low NOx For California | R32
Model Number
GRVT800604BX
Dimensions
17-1/2" W x 28" D x 33-3/8" H
Documents
Warranty
Parts: 10 years | Heat Exchanger: Limited Lifetime
Goodman 2 Ton Cased Aluminum Horizontal Coil | 17-1/2" High Cabinet With EEV Expansion | R32
Model Number
CHPEA2422B3
Dimensions
22" W x 21" D x 17-1/2" H
Documents
Limited Warranty
Parts: 10 years
Goodman GTST Connected Thermostat
Model Number
GTST-CW-WH-A
Dimensions
3.3" W x 3.3" H x 1.04" D
Documents
Limited Warranty
Parts: 5 years
Daikin One Touch Smart Thermostat
Model Number
DTST-TOU-A
Dimensions
11-9/16" W x 13-3/4" D x 7-1/16" H
Documents
Limited Warranty
Parts: 12 years
AHRI Number
215490252
Why Buy This AC & Gas Furnace System?
- Ideal for Attic or Crawlspace Installations: The CHPEA horizontal indoor coil and GRVT80 furnace are designed for horizontal airflow setups without sacrificing performance.
- Smoother Cooling & Heating: The inverter air conditioner and variable-speed furnace work together to maintain steady indoor temperatures year-round.
- Two-Stage Heating Comfort: The gas furnace operates on low heat most of the time for quieter, more economical performance.
- Optimized R-32 Cooling Performance: The factory-installed EEV in the indoor coil helps manage refrigerant flow precisely for improved efficiency.
- Matched System Efficiency: When paired properly, these components are designed to help achieve rated performance and dependable operation.
Goodman GXV6SS1810 1.5 Ton Variable-Speed Side Discharge Air Conditioner
Premium inverter-driven cooling designed for quiet, space-saving comfort
The Goodman GXV6SS1810 is a 1.5-ton (18,000 BTU) variable-speed side discharge air conditioner engineered for homeowners who want precise comfort, lower energy bills, and minimal outdoor noise. Using advanced inverter technology and R-32 refrigerant, this system continuously adjusts cooling output to match your home’s needs—eliminating temperature swings and reducing humidity.
With a compact side-discharge design, the GXV6SS1810 is ideal for patios, rooftops, and tight outdoor spaces. When paired with Goodman communicating indoor equipment, it delivers smooth, efficient operation and ultra-quiet performance, making it a smart upgrade from traditional single-stage systems.
- 1.5 ton (18,000 BTU) cooling capacity
- Up to 17.2 SEER2 efficiency for reduced energy costs
- Variable-speed inverter compressor for precise temperature control
- Side-discharge cabinet design saves outdoor space
- R-32 refrigerant with lower global warming potential
- Communicating system capable with compatible Goodman equipment
- Quiet-mode operation with sound levels as low as 45 dBA
- Heavy-gauge galvanized steel cabinet with corrosion-resistant finish
GRVT800604BX Overview
Smart, Quiet Heating with the Goodman GRVT80 Gas Furnace
The Goodman GRVT80 is a high-performance, two-stage, variable-speed gas furnace designed to deliver consistent warmth and energy efficiency. With up to 80% AFUE (Annual Fuel Utilization Efficiency), this furnace ensures that most of your fuel is converted into usable heat—helping you save on energy bills while staying comfortable all winter long.
Advanced ComfortBridge™ Technology for Smarter Control
Equipped with ComfortBridge™ technology, the GRVT80 continuously monitors and adjusts performance for optimal comfort and efficiency. Its variable-speed ECM blower motor and two-speed draft blower provide quiet, even airflow throughout your home, while the SureStart® silicon nitride igniter and self-diagnostic control board ensure reliable operation and easy maintenance.
Durable, Flexible, and Backed by Warranty
Built with a heavy-duty aluminized-steel heat exchanger and a fully insulated steel cabinet, the GRVT80 is engineered for long-lasting performance and quiet operation. It supports multi-position installation (upflow or horizontal), making it ideal for a variety of home layouts. Enjoy peace of mind with a Lifetime Heat Exchanger Limited Warranty, 10-Year Parts Warranty, and 10-Year Unit Replacement Warranty (with registration).
Standard Features
- Integrated communicating ComfortBridge™ technology
- Two-stage gas valve provides quiet, economical heating
- Commissioning and diagnostics via on board Bluetooth with the CoolCloud™ phone and tablet application
- Efficient and quiet variable-speed ECM circulator motor gently ramps up or down according to heating or cooling demand
- SureStart® Silicon Nitride igniter designed for long igniter life
- Self-diagnostic control board with constant memory fault code history output to a triple 7-segment display
- Low constant fan speed circulates air throughout the home
- Quiet, two-speed induced draft blower
- California Low NOx emissions-compliant models available
- Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD) on or after October 1, 2019.
- AHRI Certified; ETL Listed
Cabinet Features
- Fully insulated, heavy-gauge steel cabinet with durable baked-enamel finish
- Multi-position installation: upflow, horizontal left or right
- Removable bottom for side- or bottom-return applications
- Convenient left or right connection for gas/electric service
- Cabinet air leakage ≤ 2%
- Coil and furnace fit flush for most installations
Goodman CHPEA2422B3 2 Ton R-32 Horizontal Evaporator Coil – 17.5" Cabinet
All-Aluminum Horizontal Coil with Factory-Installed EEV
The Goodman CHPEA Series horizontal evaporator coil is designed for high-efficiency R-32 air conditioning and heat pump systems. Built with an all-aluminum coil and a factory-installed Electronic Expansion Valve (EEV), it provides accurate refrigerant management, improved system efficiency, and long-lasting durability. Engineered specifically for horizontal airflow applications, the CHPEA coil is ideal for attic or crawlspace installations where space and configuration matter.
- Optimized for R-32 refrigerant systems
- Horizontal airflow design for attic or crawlspace installation
- Factory-installed Electronic Expansion Valve (EEV)
- All-aluminum evaporator coil construction
- Foil-faced insulation to reduce cabinet condensation
- Rust-resistant thermoplastic drain pan with secondary drain connections
GTST Overview
The Goodman GTST connected thermostat is designed to deliver the ultimate inverter experience when used with the Goodman SD system. Compatible with all Goodman communicating unitary equipment, it can connect to the Goodman Home app via Wi-Fi, allowing control from an iOS or Android phone or tablet. Additionally, the GTST supports voice control with Amazon Alexa or Google Assistant. For enhanced efficiency and comfort, homeowners can program up to four schedule events each day on a seven-day schedule.
Standard Features
- Compact, non-intrusive design suitable for most interior environments
- Multifunction push buttons labeled for mode, fan, set-point up, set-point down
- Wi-Fi-enabled connected thermostat that works with Goodman GTST home app (iOS and Android)
- Voice control by Amazon Alexa and Google Assistant
- Programmable schedule
- Built-in temperature and humidity sensors
- Indoor unit Control: Mode (Auto/Heat/Cool/Emergency Heat), Setpoint (Dual/Single), Fan Speed, Fan On/Auto (with minimum run time)
- LED Mode indicator for heating and cooling
- Dehumidification function (setup with Goodman GTST home app)
- Error and maintenance notifications
- Control and comfort functions: Away mode and geo-fencing
- Over-the-air software update capable (requires Wi-Fi connection)
- Compatible with Cloud Services (Future)
- Setup is possible within the cloud services app, via the commissioning tool. Setup using buttons is possible, but not recommended.
Technical Specifications
- Backlit, 3.5 inch MVA TFT LCD display
- Bi-directional communications protocol for controlling HVAC system
- Multi-language support: English, Spanish, French (Goodman GTST home app only)
- 1 Auxiliary output configurable as a secondary heat source, dehumidifier. or humidifier
- FCC Certified/UL Listed
- An optional trim plate (PSPAC-WPM-L) is available.
One Touch Overview - DTST-TOU-A
The Daikin One Touch smart thermostat is the latest addition to the Daikin One ecosystem, joining the Daikin One smart thermostat as a control solution for Daikin's communicating unitary equipment.
Standard Features
- Simple, elegant industrial design
- Capacitive touchscreen user interface
- Wi-Fi-enabled smart thermostat with iOS and Android app control
- Voice control by Amazon Alexa and Google Assistant
- Control and comfort functions: Away mode, geo-fencing
- Outdoor environment monitoring: outdoor temperature, outdoor humidity, and weather forecast
- Compatible with Daikin One home air monitor for IAQ visualization
- Error and service notifications
- Multi-language support: English, Spanish, French
- Programmable 4-event schedule with adjustable hold function
- Compatible with Daikin One cloud services
- Open API compatible for home control systems such as Control4 and Crestron
- Compliant to California Title 24 (OCST listed), FCC Certified, and UL Listed
Technical Specifications
- Capacitive touch screen
- Backlit, 3.5 inch MVA TFT LCD display
- Bi-directional communications protocol for controlling HVAC system
- Bubble level (to aid installation)
- 640 × 480 pixels × 24 bit RGB (full color screen)
- Wi-Fi
- Operation Temperature: 32°F to 120°F
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST