America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
11am - 8pm EST
- 2.5 ton - best for spaces between 1200 -1500 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- Best for mild to cold climates. The heat pump is the primary heat source and the gas furnace works for supplement heating when the temperature drops down to about 30 degrees or so
Goodman 2.5 Ton Dual Fuel Hybrid Heat Pump System – 60000 BTU Gas Furnace, Two Stage, 80% AFUE, Horizontal, 14.5 SEER2, R32
- Condenser: GLZS4BA3010
- Gas Furnace: GR9T800603BN
- Evaporator Coil: CHPTA3026B3
Furnace BTU Sizing Tonnage Calculator
Heating Square Footage Range by Climate Zone
| Region 1 | Region 2 | Region 3 | Region 4 | Region 5 |
| 30 - 35 BTU's per square foot | 35 - 40 BTU's per square foot | 40 - 45 BTU's per square foot | 45 - 50 BTU's per square foot | 50 - 60 BTU's per square foot |
- 2.5 ton - best for spaces between 1200 -1500 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- Best for mild to cold climates. The heat pump is the primary heat source and the gas furnace works for supplement heating when the temperature drops down to about 30 degrees or so
Free Shipping
Over $1500
*Excludes Commercial Products
DELIVERY TIME 3-10 BUSINESS DAYS
EXCLUDING WEEKENDS AND HOLIDAYS
ProfessionalU.S. Support
GUARANTEED LOWEST PRICES
FREE
SHIPPING
OVER $1500
*Excludes Commercial Products
DELIVERY TIME
3 - 10 BUSINESS DAYS
EXCLUDING WEEKENDS AND HOLIDAYS
PROFESSIONAL
U.S. SUPPORT
ADD TO CART FOR
GUARANTEED LOWEST PRICES
0% Interest
Orders $3000+ offered at checkout
No Credit Needed
Bad credit/no credit is OK - offered at checkout
Orders over $3000 get a
7 night luxury resort stay
Goodman 2.5 Ton 15.2 SEER2 R32 Heat Pump Condenser
Model Number
GLZS4BA3010
Dimensions
29" W x 29" D x 39-1/2" H
Documents
Limited Warranty
Parts: 10 years
Goodman R32 60000 BTU 80% Multi-Speed ECM Furnace Upflow / Horizontal
Model Number
GR9T800603BN
Dimensions
17-1/2" W x 28" D x 33-3/8" H
Documents
Limited Warranty
Heat Exchanger: Limited Lifetime | Parts: 10 years
Goodman 2.5 Ton R32 Evaporator Coil With Internal TXV Horizontal
Model Number
CHPTA3026B3
Dimensions
17-1/2" W x 21" D x 26" H
Documents
Warranty
Parts: 10 years
AHRI Number
215218855
Goodman GLZS4BA3010 Heat Pump – 2.5 Ton, 15.2 SEER2
Efficient heating and cooling for year-round comfort
The Goodman GLZS4BA3010 delivers 30,000 BTU of single-stage heating and cooling performance. With a 15.2 SEER2 efficiency rating, this heat pump helps lower utility bills while providing reliable comfort for mid-sized homes.
Its scroll compressor, SmartShift® technology, and durable steel cabinet ensure years of dependable service.
Features & Benefits
- 2.5 Ton capacity (30,000 BTU)
- 15.2 SEER2 cooling / 7.8 HSPF2 heating
- Scroll compressor for efficient performance
- Factory-installed suction-line accumulator
- Galvanized-steel cabinet with powder coat finish
GR9T80 Overview
Standard Features
- Two-stage gas valve provides quiet, economical heating
- Efficient and quiet multi-speed ECM circulator motor
- SureStart™ Silicon Nitride igniter designed for long igniter life
- Self-diagnostic control board
- Low constant fan speed circulates air throughout the home
- Quiet, two-speed induced draft blower
- California Low NOx emissions-compliant models available
- Can not be installed in California’s South Coast AirQuality Management District (SCAQMD) and San Joaquin Valley Air Pollution Control District (SJVAPCD).
- AHRI Certified; ETL Listed
Cabinet Features
- Fully insulated, heavy-gauge steel cabinet with durable baked-enamel finish
- Multi-position installation:
- GR9T80: upflow, horizontal left or right
- GD9T80: downflow, horizontal left or right
- Removable bottom for side- or bottom-return applications
- Convenient left or right connection for gas/electric service
- Cabinet air leakage ≤ 2%
- Coil and furnace fit flush for most installations
Goodman CHPTA3026B3 Horizontal Coil – 2.5 Ton, 17.5" Cabinet
Reliable comfort for mid-sized systems
The Goodman CHPTA3026B3 is built for 2.5-ton residential systems and comes in a 17.5-inch cabinet, making it versatile for horizontal installations. Its durable coil and TXV design provide precise performance and efficiency.
With Goodman’s rugged cabinet design, this coil is built to withstand long-term use while delivering reliable comfort.
Features & Benefits
- 2.5 Ton nominal capacity
- 17.5" cabinet width
- All-aluminum coil design
- Factory-installed TXV for efficiency
- Optimized for R-32 refrigerant systems
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST
