America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- 2 ton - best for spaces between 1000 - 1200 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- If you have an indoor furnace, or air handler, along with an outdoor AC unit, this system will serve as a replacement for both.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- Low NOx and Ultra-Low NOx refers to California (only) emission limits on nitrogen oxides released by gas furnaces and are determined by local EPA standards and will vary for each type of gas furnace.
Goodman 2 Ton 15.2 SEER2 AC & Gas Furnace System – Two Stage Variable-Speed 80000 BTU Low NOx Gas Furnace, 80% AFUE, Downflow, R32
- Condenser: GLXS4BA2410
- Gas Furnace: GDVT800803BX
- Evaporator Coil: CAPTA3022B3
Furnace BTU Sizing Tonnage Calculator
Heating Square Footage Range by Climate Zone
| Region 1 | Region 2 | Region 3 | Region 4 | Region 5 |
| 30 - 35 BTU's per square foot | 35 - 40 BTU's per square foot | 40 - 45 BTU's per square foot | 45 - 50 BTU's per square foot | 50 - 60 BTU's per square foot |
- 2 ton - best for spaces between 1000 - 1200 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- If you have an indoor furnace, or air handler, along with an outdoor AC unit, this system will serve as a replacement for both.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- Low NOx and Ultra-Low NOx refers to California (only) emission limits on nitrogen oxides released by gas furnaces and are determined by local EPA standards and will vary for each type of gas furnace.
Goodman 2 Ton Up To 15.2 SEER2 R32 Cooling Only Condenser
Model Number
GLXS4BA2410
Dimensions
26" W x 26" D x 27" H
Documents
Limited Warranty
Parts: 10 years
Goodman 80000 BTU 80% Efficiency Two Stage Gas Furnace | Variable-Speed ECM Downflow | Low NOx For California | R32
Model Number
GDVT800803BX
Dimensions
17-1/2" W x 28" D x 33-3/8" H
Documents
Warranty
Parts: 10 years | Heat Exchanger: Limited Lifetime
Goodman 2.5 Ton R32 Evaporator Coil With Internal TXV Upflow / Downflow
Model Number
CAPTA3022B3
Dimensions
17-1/2" W x 21" D x 22" H
Documents
Warranty
Parts: 10 years
AHRI Number
216615428
GLX4B Overview
Standard Features
- High efficiency Energy-efficient compressor
- High-density foam compressor
- Advanced Copeland® Technology
- Fully charged for 15' of tubing length
- Copper tube/ enhanced aluminum fin coil-5mm diameter
- Factory-installed filter drier
- Sweat connection service valves with easy access to gauge ports
- Enclosed contactor
- High-pressure switch
- Ground lug connection
- Capacitors with extended life
- AHRI Certified
- ETL Listed
Cabinet Features
- Removable grille-style top design compliant with UL 60335-2-40
- Venturi for increased velocity of airflow
- Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
- Wire fan discharge grille
- Steel louver coil guard
- Top and side maintenance access
- Single-panel access to controls with space provided for field-installed accessories
- When properly anchored, meets the 2023 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
GDVT800803BX Overview
Efficient, Quiet Heating with the Goodman GDVT80 Gas Furnace
The Goodman GDVT80 is a high-efficiency, two-stage, variable-speed gas furnace that delivers consistent warmth and energy savings with up to 80% AFUE. Designed for downflow and horizontal installations, this furnace is ideal for homes needing flexible installation options without sacrificing performance. Its variable-speed ECM blower motor adjusts airflow smoothly, reducing energy use and maintaining even temperatures throughout your home.
Smart Comfort with ComfortBridge™ Technology
Equipped with ComfortBridge™ technology, the GDVT80 continuously monitors system performance and adjusts settings for optimal comfort and efficiency. The SureStart® silicon nitride igniter, self-diagnostic control board, and quiet two-speed draft blower work together to ensure reliable, low-maintenance operation. This smart system also supports Bluetooth diagnostics via the CoolCloud™ app, making service and setup easier for technicians.
Built to Last with Industry-Leading Warranties
The GDVT80 features a heavy-duty aluminized-steel tubular heat exchanger and a fully insulated, heavy-gauge steel cabinet for durability and quiet operation. It’s backed by a Lifetime Heat Exchanger Limited Warranty, 10-Year Parts Warranty, and a 10-Year Unit Replacement Warranty (with registration), giving you long-term peace of mind. Proudly designed, engineered, and assembled in the USA, the GDVT80 is a dependable choice for energy-efficient home heating.
Standard Features
- Integrated communicating ComfortBridge™ technology
- Two-stage gas valve provides quiet, economical heating
- Commissioning and diagnostics via on board Bluetooth with the CoolCloud™ phone and tablet application
- Efficient and quiet variable-speed ECM circulator motor gently ramps up or down according to heating or cooling demand
- SureStart® Silicon Nitride igniter designed for long igniter life
- Self-diagnostic control board with constant memory fault code history output to a triple 7-segment display
- Low constant fan speed circulates air throughout the home
- Quiet, two-speed induced draft blower
- California Low NOx emissions-compliant models available
- Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD) on or after October 1, 2019.
- AHRI Certified; ETL Listed
Cabinet Features
- Fully insulated, heavy-gauge steel cabinet with durable baked-enamel finish
- Multi-position installation: upflow, horizontal left or right
- Removable bottom for side- or bottom-return applications
- Convenient left or right connection for gas/electric service
- Cabinet air leakage ≤ 2%
- Coil and furnace fit flush for most installations
Goodman CAPTA3022B3 Cased Coil – 2–2.5 Ton, 17.5" Cabinet
Balanced comfort with reliable design
The Goodman CAPTA3022B3 offers 2–2.5 tons of capacity and features a 17.5-inch wide cabinet for flexible airflow. Designed for upflow or downflow installations, it provides reliable cooling and heating support.
Engineered with an aluminum coil and TXV, it is built to last and easy to maintain.
Features & Benefits
- 2–2.5 Ton nominal capacity
- 17.5" cabinet width for system flexibility
- All-aluminum coil for durability
- Factory-installed TXV ensures efficiency
- Designed for Goodman AC and heat pump systems
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST