Wild Weekend Savings Event extended until Tuesday, October 21, 2025 at 9:00 AM est.
Free Shipping On Orders Over $1500
America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
11am - 8pm EST
- 2 ton - best for spaces between 1000 - 1200 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- Best for mild to cold climates. The heat pump is the primary heat source and the gas furnace works for supplement heating when the temperature drops down to about 30 degrees or so
Goodman 2 Ton Dual Fuel Hybrid Heat Pump System – 60000 BTU Gas Furnace, 96% AFUE, 14.3 SEER2, Downflow, R32
- Condenser: GLZS4BA2410
- Gas Furnace: GD9S960603BN
- Evaporator Coil: CAPTA3022B3
Furnace BTU Sizing Tonnage Calculator
Heating Square Footage Range by Climate Zone
| Region 1 | Region 2 | Region 3 | Region 4 | Region 5 |
| 30 - 35 BTU's per square foot | 35 - 40 BTU's per square foot | 40 - 45 BTU's per square foot | 45 - 50 BTU's per square foot | 50 - 60 BTU's per square foot |
- 2 ton - best for spaces between 1000 - 1200 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- Best for mild to cold climates. The heat pump is the primary heat source and the gas furnace works for supplement heating when the temperature drops down to about 30 degrees or so
Free Shipping
Over $1500
*Excludes Commercial Products
DELIVERY TIME 5-10 BUSINESS DAYS
EXCLUDING WEEKENDS AND HOLIDAYS
ProfessionalU.S. Support
GUARANTEED LOWEST PRICES
FREE
SHIPPING
OVER $1500
DELIVERY TIME
5 - 10 BUSINESS DAYS, EXCLUDING WEEKENDS AND HOLIDAYS
PROFESSIONAL
U.S. SUPPORT
ADD TO CART FOR
GUARANTEED LOWEST PRICES
0% Interest
Orders $3000+ offered at checkout
No Credit Needed
Bad credit/no credit is OK - offered at checkout
Orders over $3000 get a
7 night luxury resort stay
Goodman 2 Ton 15.2 SEER2 R32 Heat Pump Condenser
Model Number
GLZS4BA2410
Dimensions
29" W x 29" D x 32-1/2" H
Documents
Limited Warranty
Parts: 10 years
Goodman R32 60000 BTU 96% Multi-Speed ECM Furnace Upflow / Horizontal
Model Number
GD9S960603BN
Dimensions
17-1/2" W x 28-3/4" D x 34-1/2" H
Documents
Limited Warranty
Heat Exchanger: Limited Lifetime | Parts: 10 years
Goodman 2.5 Ton R32 Evaporator Coil With Internal TXV Upflow / Downflow
Model Number
CAPTA3022B3
Dimensions
17-1/2" W x 21" D x 22" H
Documents
Warranty
Parts: 10 years
AHRI Number
215218665
Goodman GLZS4BA2410 Heat Pump – 2 Ton, 15.2 SEER2
Reliable comfort for moderate-sized homes
The Goodman GLZS4BA2410 provides 24,000 BTU of cooling and heating power with high efficiency ratings of 15.2 SEER2 and 7.8 HSPF2. It’s a great choice for moderate-sized homes seeking dependable, energy-efficient comfort.
Equipped with a rotary compressor, ECM fan motor, and SmartShift® technology, this heat pump ensures consistent operation in all seasons.
Features & Benefits
- 2 Ton capacity (24,000 BTU)
- 15.2 SEER2 / 7.8 HSPF2 efficiency ratings
- Rotary compressor for consistent performance
- All-aluminum coil for durability and efficiency
- Powder-coated cabinet for weather resistance
GD9S96 Overview
Standard Features
- Heavy-duty aluminized-steel tubular heat exchanger
- Stainless-steel secondary heat exchanger
- Single-stage gas valve
- Durable Silicon Nitride igniter
- Quiet single-speed induced draft blower
- Self-diagnostic control board with constant memory fault code history output to a LED
- All models comply with California 40 ng/J Low NOx emissions standard
- Can not be installed in California’s South Coast AirQuality Management District (SCAQMD) and San Joaquin Valley Air Pollution Control District (SJVAPCD).
- AHRI Certified; ETL Listed
Cabinet Features
- Designed for multi-position installation —
- GR9S96: upflow, horizontal left or right
- GD9S96: downflow, horizontal left or right
- Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
- Easy-to-install top venting with optional side venting — GR9S96/upflow models only
- Convenient left or right connection for gas and electrical service
- Cabinet air leakage (QLeak) ≤ 2%
- Heavy-gauge steel cabinet with durable finish
- Fully insulated heat exchanger and blower section
- Airtight solid bottom or side return with easy-cut tabs for effortless removal in bottom air-inlet applications
Goodman CAPTA3022B3 Cased Coil – 2–2.5 Ton, 17.5" Cabinet
Balanced comfort with reliable design
The Goodman CAPTA3022B3 offers 2–2.5 tons of capacity and features a 17.5-inch wide cabinet for flexible airflow. Designed for upflow or downflow installations, it provides reliable cooling and heating support.
Engineered with an aluminum coil and TXV, it is built to last and easy to maintain.
Features & Benefits
- 2–2.5 Ton nominal capacity
- 17.5" cabinet width for system flexibility
- All-aluminum coil for durability
- Factory-installed TXV ensures efficiency
- Designed for Goodman AC and heat pump systems
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST
