America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
11am - 8pm EST
- 2 ton - best for spaces between 1000 - 1200 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- If you have an indoor furnace, or air handler, along with an outdoor AC unit, this system will serve as a replacement for both.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- Low NOx and Ultra-Low NOx refers to California (only) emission limits on nitrogen oxides released by gas furnaces and are determined by local EPA standards and will vary for each type of gas furnace.
Goodman 2 Ton 18 SEER2 Variable-Speed Inverter AC & Gas Furnace System - Two-Stage Variable-Speed 80000 BTU 80% AFUE Low NOx Gas Furnace, Downflow, R32
- Condenser: GXV6SA2410
- Gas Furnace: GDVT800803BX
- Evaporator Coil: CAPEA3022B3
- Thermostat (Optional): Choose a compatible proprietary Goodman or Daikin communicating thermostat
Furnace BTU Sizing Tonnage Calculator
Heating Square Footage Range by Climate Zone
| Region 1 | Region 2 | Region 3 | Region 4 | Region 5 |
| 30 - 35 BTU's per square foot | 35 - 40 BTU's per square foot | 40 - 45 BTU's per square foot | 45 - 50 BTU's per square foot | 50 - 60 BTU's per square foot |
- 2 ton - best for spaces between 1000 - 1200 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- If you have an indoor furnace, or air handler, along with an outdoor AC unit, this system will serve as a replacement for both.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- Low NOx and Ultra-Low NOx refers to California (only) emission limits on nitrogen oxides released by gas furnaces and are determined by local EPA standards and will vary for each type of gas furnace.
Free Shipping
Over $1500
*Excludes Commercial Products
DELIVERY TIME 3-10 BUSINESS DAYS
EXCLUDING WEEKENDS AND HOLIDAYS
ProfessionalU.S. Support
GUARANTEED LOWEST PRICES
FREE
SHIPPING
OVER $1500
*Excludes Commercial Products
DELIVERY TIME
3 - 10 BUSINESS DAYS
EXCLUDING WEEKENDS AND HOLIDAYS
PROFESSIONAL
U.S. SUPPORT
ADD TO CART FOR
GUARANTEED LOWEST PRICES
0% Interest
Orders $3000+ offered at checkout
No Credit Needed
Bad credit/no credit is OK - offered at checkout
Orders over $3000 get a
7 night luxury resort stay
Goodman 2 Ton Up to 17.2 SEER2 Variable-Speed Inverter AC Side Discharge Condenser – R32
Model Number
GXV6SS3010
Dimensions
36-5/8" W x 13-3/4" D x 27-3/8" H
Documents
Limited Warranty
Parts: 10 years | Compressor: Limited Lifetime
Goodman 80000 BTU 80% Efficiency Two Stage Gas Furnace | Variable-Speed ECM Downflow | Low NOx For California | R32
Model Number
GDVT800803BX
Dimensions
17-1/2" W x 28" D x 33-3/8" H
Documents
Warranty
Parts: 10 years | Heat Exchanger: Limited Lifetime
Goodman 2.5 Ton 17-1/2" Wide Cased R32 Evaporator Coil With Internal EEV
Model Number
CAPEA3022B3
Dimensions
17-1/2" W x 21" D x 22" H
Documents
Limited Warranty
Parts: 10 years
Goodman GTST Connected Thermostat
Model Number
GTST-CW-WH-A
Dimensions
3.3" W x 3.3" H x 1.04" D
Documents
Limited Warranty
Parts: 5 years
Daikin One Touch Smart Thermostat
Model Number
DTST-TOU-A
Dimensions
11-9/16" W x 13-3/4" D x 7-1/16" H
Documents
Limited Warranty
Parts: 12 years
AHRI Number
215490641
Why Buy This AC & Gas Furnace System?
- Engineered for Downflow Applications: The GDVT80 gas furnace is specifically designed for downflow installations, ensuring proper airflow and safe system operation.
- Quiet, Two-Stage Heating: The furnace adjusts between high and low heat settings to improve comfort while reducing noise.
- Inverter-Driven Cooling Efficiency: The GXV6S air conditioner automatically adjusts output to match your home’s cooling demand for steady comfort.
- Precision Indoor Coil Design: The CAPEA coil with factory-installed electronic expansion valve (EEV) helps maximize cooling performance and refrigerant efficiency.
- Complete, Matched Heating & Cooling System: Designed to work as one integrated AC and gas furnace system for reliable year-round comfort.
Goodman GXV6SA2410 2 Ton Variable-Speed Side Discharge Air Conditioner
Efficient, adaptable cooling approved for nationwide installation
The Goodman GXV6SA2410 delivers 2 tons (24,000 BTU) of inverter-driven cooling with excellent efficiency and quiet performance. Designed for all-region use, this system offers precise comfort control and reduced operating costs compared to traditional air conditioners.
Its side-discharge design allows for flexible placement in tight outdoor spaces while maintaining reliable, long-lasting operation.
- 2 ton (24,000 BTU) cooling capacity
- Up to 17.2 SEER2 efficiency
- Variable-speed inverter compressor
- Side-discharge design
- R-32 refrigerant
- All-region approved
GDVT800803BX Overview
Efficient, Quiet Heating with the Goodman GDVT80 Gas Furnace
The Goodman GDVT80 is a high-efficiency, two-stage, variable-speed gas furnace that delivers consistent warmth and energy savings with up to 80% AFUE. Designed for downflow and horizontal installations, this furnace is ideal for homes needing flexible installation options without sacrificing performance. Its variable-speed ECM blower motor adjusts airflow smoothly, reducing energy use and maintaining even temperatures throughout your home.
Smart Comfort with ComfortBridge™ Technology
Equipped with ComfortBridge™ technology, the GDVT80 continuously monitors system performance and adjusts settings for optimal comfort and efficiency. The SureStart® silicon nitride igniter, self-diagnostic control board, and quiet two-speed draft blower work together to ensure reliable, low-maintenance operation. This smart system also supports Bluetooth diagnostics via the CoolCloud™ app, making service and setup easier for technicians.
Built to Last with Industry-Leading Warranties
The GDVT80 features a heavy-duty aluminized-steel tubular heat exchanger and a fully insulated, heavy-gauge steel cabinet for durability and quiet operation. It’s backed by a Lifetime Heat Exchanger Limited Warranty, 10-Year Parts Warranty, and a 10-Year Unit Replacement Warranty (with registration), giving you long-term peace of mind. Proudly designed, engineered, and assembled in the USA, the GDVT80 is a dependable choice for energy-efficient home heating.
Standard Features
- Integrated communicating ComfortBridge™ technology
- Two-stage gas valve provides quiet, economical heating
- Commissioning and diagnostics via on board Bluetooth with the CoolCloud™ phone and tablet application
- Efficient and quiet variable-speed ECM circulator motor gently ramps up or down according to heating or cooling demand
- SureStart® Silicon Nitride igniter designed for long igniter life
- Self-diagnostic control board with constant memory fault code history output to a triple 7-segment display
- Low constant fan speed circulates air throughout the home
- Quiet, two-speed induced draft blower
- California Low NOx emissions-compliant models available
- Can no longer be installed in California’s South Coast Air Quality Management District (SCAQMD) on or after October 1, 2019.
- AHRI Certified; ETL Listed
Cabinet Features
- Fully insulated, heavy-gauge steel cabinet with durable baked-enamel finish
- Multi-position installation: upflow, horizontal left or right
- Removable bottom for side- or bottom-return applications
- Convenient left or right connection for gas/electric service
- Cabinet air leakage ≤ 2%
- Coil and furnace fit flush for most installations
Goodman CAPEA3022B3 2.5 Ton R-32 Cased Upflow/Downflow Evaporator Coil – 17.5" Cabinet
All-Aluminum Coil with Factory-Installed EEV for Enhanced System Efficiency
The Goodman CAPEA Series indoor evaporator coil is engineered for high-efficiency R-32 air conditioning and heat pump systems. Featuring an all-aluminum coil design and a factory-installed Electronic Expansion Valve (EEV), this coil delivers precise refrigerant control, improved efficiency, and dependable long-term performance. Designed for upflow or downflow installation, the CAPEA coil integrates seamlessly with compatible Goodman and Daikin outdoor units for optimized system operation.
- Optimized for R-32 refrigerant systems
- Factory-installed Electronic Expansion Valve (EEV)
- All-aluminum evaporator coil construction
- Upflow and downflow installation versatility
- Rust-resistant thermoplastic drain pan with secondary drain connections
- Foil-faced insulation to reduce cabinet condensation
GTST Overview
The Goodman GTST connected thermostat is designed to deliver the ultimate inverter experience when used with the Goodman SD system. Compatible with all Goodman communicating unitary equipment, it can connect to the Goodman Home app via Wi-Fi, allowing control from an iOS or Android phone or tablet. Additionally, the GTST supports voice control with Amazon Alexa or Google Assistant. For enhanced efficiency and comfort, homeowners can program up to four schedule events each day on a seven-day schedule.
Standard Features
- Compact, non-intrusive design suitable for most interior environments
- Multifunction push buttons labeled for mode, fan, set-point up, set-point down
- Wi-Fi-enabled connected thermostat that works with Goodman GTST home app (iOS and Android)
- Voice control by Amazon Alexa and Google Assistant
- Programmable schedule
- Built-in temperature and humidity sensors
- Indoor unit Control: Mode (Auto/Heat/Cool/Emergency Heat), Setpoint (Dual/Single), Fan Speed, Fan On/Auto (with minimum run time)
- LED Mode indicator for heating and cooling
- Dehumidification function (setup with Goodman GTST home app)
- Error and maintenance notifications
- Control and comfort functions: Away mode and geo-fencing
- Over-the-air software update capable (requires Wi-Fi connection)
- Compatible with Cloud Services (Future)
- Setup is possible within the cloud services app, via the commissioning tool. Setup using buttons is possible, but not recommended.
Technical Specifications
- Backlit, 3.5 inch MVA TFT LCD display
- Bi-directional communications protocol for controlling HVAC system
- Multi-language support: English, Spanish, French (Goodman GTST home app only)
- 1 Auxiliary output configurable as a secondary heat source, dehumidifier. or humidifier
- FCC Certified/UL Listed
- An optional trim plate (PSPAC-WPM-L) is available.
One Touch Overview - DTST-TOU-A
The Daikin One Touch smart thermostat is the latest addition to the Daikin One ecosystem, joining the Daikin One smart thermostat as a control solution for Daikin's communicating unitary equipment.
Standard Features
- Simple, elegant industrial design
- Capacitive touchscreen user interface
- Wi-Fi-enabled smart thermostat with iOS and Android app control
- Voice control by Amazon Alexa and Google Assistant
- Control and comfort functions: Away mode, geo-fencing
- Outdoor environment monitoring: outdoor temperature, outdoor humidity, and weather forecast
- Compatible with Daikin One home air monitor for IAQ visualization
- Error and service notifications
- Multi-language support: English, Spanish, French
- Programmable 4-event schedule with adjustable hold function
- Compatible with Daikin One cloud services
- Open API compatible for home control systems such as Control4 and Crestron
- Compliant to California Title 24 (OCST listed), FCC Certified, and UL Listed
Technical Specifications
- Capacitive touch screen
- Backlit, 3.5 inch MVA TFT LCD display
- Bi-directional communications protocol for controlling HVAC system
- Bubble level (to aid installation)
- 640 × 480 pixels × 24 bit RGB (full color screen)
- Wi-Fi
- Operation Temperature: 32°F to 120°F
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST
