America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
11am - 8pm EST
- 3 ton - best for spaces between 1500 - 1800 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- Best for mild to cold climates. The heat pump is the primary heat source and the gas furnace works for supplement heating when the temperature drops down to about 30 degrees or so
Goodman 3 Ton Dual Fuel Hybrid Heat Pump System – 100000 BTU Gas Furnace, 80% AFUE, 15.2 SEER2, Horizontal, R32
- Condenser: GLZS5BA3610
- Gas Furnace: GR9S801005CN
- Evaporator Coil: CHPTA4230C3
Furnace BTU Sizing Tonnage Calculator
Heating Square Footage Range by Climate Zone
| Region 1 | Region 2 | Region 3 | Region 4 | Region 5 |
| 30 - 35 BTU's per square foot | 35 - 40 BTU's per square foot | 40 - 45 BTU's per square foot | 45 - 50 BTU's per square foot | 50 - 60 BTU's per square foot |
- 3 ton - best for spaces between 1500 - 1800 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- Best for mild to cold climates. The heat pump is the primary heat source and the gas furnace works for supplement heating when the temperature drops down to about 30 degrees or so
Free Shipping
Over $1500
*Excludes Commercial Products
DELIVERY TIME 3-10 BUSINESS DAYS
EXCLUDING WEEKENDS AND HOLIDAYS
ProfessionalU.S. Support
GUARANTEED LOWEST PRICES
FREE
SHIPPING
OVER $1500
*Excludes Commercial Products
DELIVERY TIME
3 - 10 BUSINESS DAYS
EXCLUDING WEEKENDS AND HOLIDAYS
PROFESSIONAL
U.S. SUPPORT
ADD TO CART FOR
GUARANTEED LOWEST PRICES
0% Interest
Orders $3000+ offered at checkout
No Credit Needed
Bad credit/no credit is OK - offered at checkout
Orders over $3000 get a
7 night luxury resort stay
Goodman 3 Ton Up To 16 SEER2 R32 High-Efficiency Heat Pump Condenser
Model Number
GLXS5BA3610
Dimensions
35-1/2" W x 35-1/2" D x 39-1/2" H
Documents
Warranty
Parts: 10 years
Goodman R32 100000 BTU 80% Multi-Speed ECM Furnace Upflow / Horizontal
Model Number
GR9S801005CN
Dimensions
21" W x 28" D x 33-3/8" H
Documents
Limited Warranty
Heat Exchanger: Limited Lifetime | Parts: 10 years
Goodman 3.5 Ton R32 Evaporator Coil With Internal TXV Horizontal
Model Number
CHPTA4230C3
Dimensions
21" W x 21" D x 30" H
Documents
Warranty
Parts: 10 years
AHRI Number
215382742
GLZS5B Overview
Standard Features
- High-efficiency scroll compressor
- SmartShift® technology to ensure quiet reliable defrost
- Enhanced aluminum fin with coil - 5mm diameter copper tubes in 1.5 ton - 3.5 ton
- Enhanced aluminum fin coil with 7mm diameter copper tubes 4 - 5 ton
- Single-speed PSC condenser fan motor
- Factory-installed suction-line accumulator
- Factory-installed compressor crankcase heater
- Factory-installed high-capacity muffler
- High- and low-pressure switches
- Service valves with sweat connections and easy access to gauge ports
- Fully charged for 15’ of tubing length
- Ground lug connection
- Fully enclosed contactor
- Capacitor with extended life
- AHRI Certified; ETL Listed
Cabinet Features
- Removable grille style top design compliant with UL 60335-2-40
- Steel louver coil guard
- Heavy-gauge galvanized-steel cabinet
- Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
- Top and side maintenance access
- Single panel access to controls with space provided for field-installed accessories
- When properly anchored, meets the 2023 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
Goodman GR9S801005CN Gas Furnace – 100,000 BTU, 80% AFUE
High-capacity heating for large homes
The Goodman GR9S801005CN provides 100,000 BTU of heating input at 80% AFUE efficiency. With five burners and a robust blower system, it delivers dependable heating power for large residential spaces.
Built for strength and durability, this furnace ensures long-term comfort and reliable performance.
Features & Benefits
- 100,000 BTU input / 80,000 BTU output
- 80% AFUE efficiency rating
- Five-burner configuration
- Large blower motor for improved airflow
- Heavy-duty steel cabinet with insulation
Goodman CHPTA4230C3 Horizontal Coil – 3.5 Ton, 21" Cabinet
High-capacity coil for larger systems
The Goodman CHPTA4230C3 supports 3.5-ton residential systems in a 21-inch cabinet designed for horizontal applications. It ensures efficient refrigerant management and consistent comfort for larger spaces.
Built with an all-aluminum coil, factory-installed TXV, and a rugged cabinet, this coil delivers long-lasting performance.
Features & Benefits
- 3.5 Ton nominal capacity
- 21" cabinet width for larger system designs
- All-aluminum coil for enhanced durability
- Factory-installed TXV included
- Durable cabinet construction for long service life
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST
