America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
11am - 8pm EST
- 3 ton - best for spaces between 1500 - 1800 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Good for extreme southern climates with very low heating demand such as south Florida and south Texas (otherwise a heat pump is the best option)
- If you have an indoor furnace, or air handler, along with an outdoor AC unit, this system will serve as a replacement for both.
Goodman 3 Ton 16.6 SEER2 Variable-Speed Inverter Air Conditioning System With Electric Heat - R32
- Condenser: GXV6SA3610
- Air Handler: AHVE42CP1300
- Heating Element (Optional): Choose a compatible electric heat kit for supplemental heating
AC Size Calculator | Get BTU’s and Tonnage – Free and Easy!
Welcome! START HERE:
Use the sizing calculator below to calculate your required system size.
Follow these easy steps:
- 3 ton - best for spaces between 1500 - 1800 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Good for extreme southern climates with very low heating demand such as south Florida and south Texas (otherwise a heat pump is the best option)
- If you have an indoor furnace, or air handler, along with an outdoor AC unit, this system will serve as a replacement for both.
Free Shipping
Over $1500
*Excludes Commercial Products
DELIVERY TIME 3-10 BUSINESS DAYS
EXCLUDING WEEKENDS AND HOLIDAYS
ProfessionalU.S. Support
GUARANTEED LOWEST PRICES
FREE
SHIPPING
OVER $1500
DELIVERY TIME
3 - 10 BUSINESS DAYS, EXCLUDING WEEKENDS AND HOLIDAYS
PROFESSIONAL
U.S. SUPPORT
ADD TO CART FOR
GUARANTEED LOWEST PRICES
0% Interest
Orders $3000+ offered at checkout
No Credit Needed
Bad credit/no credit is OK - offered at checkout
Orders over $3000 get a
7 night luxury resort stay
Goodman 3 Ton Up to 17.2 SEER2 Variable-Speed Inverter AC Side Discharge Condenser – R32
Model Number
GXV6SS3010
Dimensions
36-5/8" W x 13-3/4" D x 27-3/8" H
Documents
Limited Warranty
Parts: 10 years | Compressor: Limited Lifetime
Goodman 3.5 Ton Variable-Speed Multi-Position Air Handler with Internal EEV – R32
Model Number
AHVE42CP1300
Dimensions
21" W x 21" D x 53-7/16" H
Documents
Limited Warranty
Parts: 10 years
Heating Element
Choice of (1) Heat Kit
Heat Options
3kW | 5kW | 6kW | 8kW | 10kW | 15kW | 20kW
Documents
Heat Kits Specifications Sheet
Warranty
5 years
AHRI Number
215446883
Goodman GXV6SA3610 3 Ton Variable-Speed Side Discharge Air Conditioner
High-efficiency, all-region cooling engineered for whole-home comfort
The Goodman GXV6SA3610 delivers 3 tons (36,000 BTU) of powerful, energy-efficient cooling for mid-to-large homes. Its variable-speed inverter compressor continuously adapts to changing indoor conditions, providing longer run times at lower speeds for improved comfort, humidity control, and efficiency.
Designed with a low-profile side-discharge cabinet, this unit fits easily into tight outdoor spaces while maintaining quiet operation. With R-32 refrigerant and all-region approval, the GXV6SA3610 offers a future-ready cooling solution built for dependable, long-term performance.
- 3 ton (36,000 BTU) cooling capacity for medium to large homes
- Up to 17.2 SEER2 energy efficiency
- Inverter-driven variable-speed compressor
- Side-discharge configuration saves outdoor space
- Environmentally friendly R-32 refrigerant
- All-region approved model
- Communicating system ready with compatible Goodman controls
- Quiet-mode operation for reduced outdoor sound levels
Goodman AHVE42CP1300 3.5 Ton Variable-Speed Communicating Air Handler
Enhanced airflow and humidity control for larger homes
The Goodman AHVE42CP1300 is a 3.5-ton (42,000 BTU) variable-speed air handler engineered for larger residential systems that demand dependable airflow and comfort control. Its ECM blower motor and communicating capability allow the system to fine-tune performance for consistent temperatures and reduced humidity.
Designed with a low-leakage SmartFrame™ cabinet and factory-installed R-32 sensor, this air handler supports modern refrigerant standards while offering flexible installation options and long-term reliability.
- 3.5 ton (42,000 BTU) capacity
- Variable-speed ECM blower motor
- Internal electronic expansion valve
- All-aluminum evaporator coil
- Optimized for R-32 systems
- Multi-position installation flexibility
- Improved moisture removal
Goodman HKTS Series Electric Heat Kits for Air Handlers
Reliable electric heating solutions designed to integrate seamlessly with Goodman air handlers
Goodman HKTS Series electric heat kits provide dependable supplemental or primary electric heating when paired with compatible Goodman air handlers. Designed for use in all-electric or dual-fuel HVAC systems, these heat kits deliver consistent, evenly distributed warmth during colder months, making them an ideal solution for homes without access to natural gas or in regions requiring electric backup heat.
Available in a wide range of heating capacities, Goodman HKTS heat kits are engineered for straightforward installation and long-term reliability. Each kit is designed to integrate cleanly into the air handler cabinet, maintaining proper airflow while delivering safe, efficient electric heat. Whether used as auxiliary heat for heat pump systems or as the primary heat source, HKTS kits offer dependable performance and system compatibility.
- Compatible with select Goodman air handlers including AHVE and other multi-position models
- Multiple heating capacities available to match a wide range of system sizes and comfort needs
- Designed for electric and heat pump applications
- Provides supplemental or primary electric heating
- Engineered for proper airflow and temperature control
- Integrated safety controls for reliable operation
- Supports single-point wiring options with compatible air handlers
- Factory-designed fit for clean installation and long-term durability
- Ideal for all-electric homes or gas-restricted installations
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST
