America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- 4 ton - best for spaces between 2000-2400 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Best for mild to cold climates. The heat pump is the primary heat source and the gas furnace works for supplement heating when the temperature drops down to about 30 degrees or so
Goodman 4 Ton 16.5 SEER2 Dual Fuel Side Discharge Heat Pump & Gas Furnace System - Inverter Heat Pump, 80,000 BTU 80% AFUE 2-Stage Variable-Speed Horizontal Ultra-Low NOx Furnace, California & Colorado Compliant, R32
- Condenser: GZV9SA4810
- Gas Furnace: GRVS800805CU
- Evaporator Coil: CHPEA4830C3
- Thermostat (Optional): Choose a compatible proprietary Goodman or Daikin communicating thermostat
Furnace BTU Sizing Tonnage Calculator
Heating Square Footage Range by Climate Zone
| Region 1 | Region 2 | Region 3 | Region 4 | Region 5 |
| 30 - 35 BTU's per square foot | 35 - 40 BTU's per square foot | 40 - 45 BTU's per square foot | 45 - 50 BTU's per square foot | 50 - 60 BTU's per square foot |
- 4 ton - best for spaces between 2000-2400 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Best for mild to cold climates. The heat pump is the primary heat source and the gas furnace works for supplement heating when the temperature drops down to about 30 degrees or so
Goodman 4 Ton Up to 21 SEER2 Variable-Speed Inverter Heat Pump Side Discharge Condenser - R32
Model Number
GZV9SA4810
Dimensions
37" W x 12-5/8" D x 56-5/16" H
Documents
Warranty
Parts: 10 years | Limited Replacement: 10 years
Goodman 80000 BTU 80% AFUE Gas Furnace - Single Stage, Variable-Speed, Upflow/Horizontal, Ultra-Low NOx, 21" Width
Model Number
GRVS800805CU
Dimensions
21" W x 28" D x 33-3/8" H
Documents
Warranty
Parts: 10 years | Unit Replacement: 10 years
Goodman 4 Ton Cased Aluminum Horizontal Coil | 21" High Cabinet With EEV Expansion | R32
Model Number
CHPEA4830C3
Dimensions
30" W x 21" D x 21" H
Documents
Limited Warranty
Parts: 10 years
Goodman GTST Connected Thermostat
Model Number
GTST-CW-WH-A
Dimensions
3.3" W x 3.3" H x 1.04" D
Documents
Limited Warranty
Parts: 5 years
Daikin One Touch Smart Thermostat
Model Number
DTST-TOU-A
Dimensions
11-9/16" W x 13-3/4" D x 7-1/16" H
Documents
Limited Warranty
Parts: 12 years
AHRI Number
217989227
Goodman 4 Ton Variable-Speed Inverter Heat Pump Condenser – Up to 21 SEER2 Side Discharge System
Powerful 46,000–48,000 BTU Comfort for Larger Homes and Business Applications
The Goodman GZV9SA4810 4 Ton heat pump condenser is built for larger homes and light commercial spaces that need powerful, efficient heating and cooling. This variable-speed inverter system delivers up to 46,000 BTU cooling capacity and up to 48,000 BTU heating capacity at 47°F, helping maintain consistent comfort while using energy more efficiently.
With R-32 refrigerant, a compact side discharge cabinet, and advanced Goodman communicating technology, this unit is designed for modern comfort needs. Its quiet operation, strong cold-weather heating performance, and built-in diagnostics make it a strong option for property owners looking for long-term reliability and comfort control.
Features & Benefits
- 4 Ton capacity with up to 46,000 BTU cooling and 48,000 BTU heating
- Up to 21 SEER2 and 10.0 HSPF2 high-efficiency performance
- Variable-speed inverter compressor helps reduce temperature swings
- Side discharge design saves outdoor space and improves placement flexibility
- Quiet-mode operation and high-density compressor sound blanket
- R-32 refrigerant for efficient heating and cooling performance
- Heating operation range down to -20°F for cold-climate applications
- Field-selectable boost mode for demanding conditions
- Compatible with Goodman communicating equipment
- Corrosion-resistant cabinet with 500-hour salt-spray tested finish
Goodman 80,000 BTU 80% AFUE Gas Furnace – GRVS800805CU
Powerful whole-home heating with advanced comfort technology and ultra-low emissions
The Goodman GRVS800805CU provides a robust 80,000 BTU heating output, making it an excellent choice for larger homes and light commercial spaces that require reliable performance. Featuring a variable-speed ECM blower motor, this furnace adjusts airflow smoothly and quietly, helping maintain even temperatures while improving indoor comfort and air quality.
Engineered for Ultra-Low NOx operation, this furnace complies with California’s strict emission standards and offers a durable stainless-steel tubular heat exchanger for long-lasting performance. Its 21-inch cabinet width delivers additional airflow capacity—supporting cooling systems up to 5 tons—while maintaining installation versatility with upflow or horizontal mounting options.
- 80,000 BTU heating capacity for larger homes and businesses
- 80% AFUE efficiency for dependable, cost-effective operation
- Variable-speed ECM blower ensures quieter operation and enhanced comfort
- Ultra-Low NOx compliant — ideal for SCAQMD and SJVUAPCD regions
- ComfortBridge™ communicating technology for smarter, optimized operation
- CoolCloud™ Bluetooth diagnostics streamline maintenance and troubleshooting
- Heavy-duty stainless steel tubular heat exchanger enhances durability and heat transfer
- Single-stage gas valve for straightforward, reliable heating
- Multi-position installation: Upflow or horizontal left/right
- 21” wide cabinet for higher airflow and compatibility with larger cooling systems
- Supports AC systems from 2–5 tons (per airflow ratings)
Goodman CHPEA4830C3 4 Ton R-32 Horizontal Evaporator Coil – 21" Cabinet
Large-Capacity Horizontal Coil with Factory-Installed EEV
The Goodman CHPEA Series horizontal evaporator coil is designed for high-efficiency R-32 air conditioning and heat pump systems. Built with an all-aluminum coil and a factory-installed Electronic Expansion Valve (EEV), it provides accurate refrigerant management, improved system efficiency, and long-lasting durability. Engineered specifically for horizontal airflow applications, the CHPEA coil is ideal for attic or crawlspace installations where space and configuration matter.
- Optimized for R-32 refrigerant systems
- Horizontal airflow design for attic or crawlspace installation
- Factory-installed Electronic Expansion Valve (EEV)
- All-aluminum evaporator coil construction
- Foil-faced insulation to reduce cabinet condensation
- Rust-resistant thermoplastic drain pan with secondary drain connections
GTST Overview
The Goodman GTST connected thermostat is designed to deliver the ultimate inverter experience when used with the Goodman SD system. Compatible with all Goodman communicating unitary equipment, it can connect to the Goodman Home app via Wi-Fi, allowing control from an iOS or Android phone or tablet. Additionally, the GTST supports voice control with Amazon Alexa or Google Assistant. For enhanced efficiency and comfort, homeowners can program up to four schedule events each day on a seven-day schedule.
Standard Features
- Compact, non-intrusive design suitable for most interior environments
- Multifunction push buttons labeled for mode, fan, set-point up, set-point down
- Wi-Fi-enabled connected thermostat that works with Goodman GTST home app (iOS and Android)
- Voice control by Amazon Alexa and Google Assistant
- Programmable schedule
- Built-in temperature and humidity sensors
- Indoor unit Control: Mode (Auto/Heat/Cool/Emergency Heat), Setpoint (Dual/Single), Fan Speed, Fan On/Auto (with minimum run time)
- LED Mode indicator for heating and cooling
- Dehumidification function (setup with Goodman GTST home app)
- Error and maintenance notifications
- Control and comfort functions: Away mode and geo-fencing
- Over-the-air software update capable (requires Wi-Fi connection)
- Compatible with Cloud Services (Future)
- Setup is possible within the cloud services app, via the commissioning tool. Setup using buttons is possible, but not recommended.
Technical Specifications
- Backlit, 3.5 inch MVA TFT LCD display
- Bi-directional communications protocol for controlling HVAC system
- Multi-language support: English, Spanish, French (Goodman GTST home app only)
- 1 Auxiliary output configurable as a secondary heat source, dehumidifier. or humidifier
- FCC Certified/UL Listed
- An optional trim plate (PSPAC-WPM-L) is available.
One Touch Overview - DTST-TOU-A
The Daikin One Touch smart thermostat is the latest addition to the Daikin One ecosystem, joining the Daikin One smart thermostat as a control solution for Daikin's communicating unitary equipment.
Standard Features
- Simple, elegant industrial design
- Capacitive touchscreen user interface
- Wi-Fi-enabled smart thermostat with iOS and Android app control
- Voice control by Amazon Alexa and Google Assistant
- Control and comfort functions: Away mode, geo-fencing
- Outdoor environment monitoring: outdoor temperature, outdoor humidity, and weather forecast
- Compatible with Daikin One home air monitor for IAQ visualization
- Error and service notifications
- Multi-language support: English, Spanish, French
- Programmable 4-event schedule with adjustable hold function
- Compatible with Daikin One cloud services
- Open API compatible for home control systems such as Control4 and Crestron
- Compliant to California Title 24 (OCST listed), FCC Certified, and UL Listed
Technical Specifications
- Capacitive touch screen
- Backlit, 3.5 inch MVA TFT LCD display
- Bi-directional communications protocol for controlling HVAC system
- Bubble level (to aid installation)
- 640 × 480 pixels × 24 bit RGB (full color screen)
- Wi-Fi
- Operation Temperature: 32°F to 120°F
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST