America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
11am - 8pm EST
- 5 ton - best for spaces between 2400- 3000 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Heat pumps are all electric and good for mild and cold climates.
- If you have an indoor furnace, or air handler, along with an outdoor AC unit, this system will serve as a replacement for both.
Goodman 5 Ton 16.6 SEER2 Variable-Speed Inverter Heat Pump System - High-Efficiency, R32
- Condenser: GZV6SA6010
- Air Handler: AHVE60DP1300
- Heating Element (Optional): Choose a compatible electric heat kit for supplemental heating
AC Size Calculator | Get BTU’s and Tonnage – Free and Easy!
Welcome! START HERE:
Use the sizing calculator below to calculate your required system size.
Follow these easy steps:
- 5 ton - best for spaces between 2400- 3000 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Heat pumps are all electric and good for mild and cold climates.
- If you have an indoor furnace, or air handler, along with an outdoor AC unit, this system will serve as a replacement for both.
Free Shipping
Over $1500
*Excludes Commercial Products
DELIVERY TIME 3-10 BUSINESS DAYS
EXCLUDING WEEKENDS AND HOLIDAYS
ProfessionalU.S. Support
GUARANTEED LOWEST PRICES
FREE
SHIPPING
OVER $1500
DELIVERY TIME
3 - 10 BUSINESS DAYS, EXCLUDING WEEKENDS AND HOLIDAYS
PROFESSIONAL
U.S. SUPPORT
ADD TO CART FOR
GUARANTEED LOWEST PRICES
0% Interest
Orders $3000+ offered at checkout
No Credit Needed
Bad credit/no credit is OK - offered at checkout
Orders over $3000 get a
7 night luxury resort stay
Goodman 5 Ton Variable-Speed Inverter Side Discharge Heat Pump – Up to 16.2 SEER2, High-Efficiency, R32
Model Number
GZV6SA6010
Dimensions
37" W x 12-5/8" D x 39" H
Documents
Limited Warranty
Parts: 10 years | Compressor: Limited Lifetime
Goodman 5 Ton Variable-Speed Multi-Position Air Handler with Internal EEV – R32
Model Number
Dimensions
24-1/2" W x 21" D x 58" H
Documents
Limited Warranty
Parts: 10 years
Heating Element
Choice of (1) Heat Kit
Heat Options
3kW | 5kW | 6kW | 8kW | 10kW | 15kW | 20kW
Documents
Heat Kits Specifications Sheet
Warranty
5 years
AHRI Number
215429195
Goodman GZV6SA6010 5 Ton Variable-Speed Side Discharge Heat Pump
Maximum-capacity inverter comfort for large homes and high-demand applications
The Goodman GZV6SA6010 is a 5-ton (60,000 BTU) variable-speed heat pump engineered for large homes and demanding comfort needs. Its inverter-driven technology delivers smooth, efficient heating and cooling while minimizing temperature swings and operating noise.
With a compact side-discharge design and all-region approval, this system offers powerful performance, flexible installation, and modern efficiency using environmentally friendly R-32 refrigerant.
- 5 ton (60,000 BTU) heating and cooling capacity
- Variable-speed inverter compressor
- Side-discharge space-saving design
- R-32 refrigerant
- All-region approved heat pump
- Designed for large homes and high-load applications
Goodman AHVE60DP1300 5 Ton Variable-Speed Communicating Air Handler
Maximum airflow capacity for large homes and demanding comfort systems
The Goodman AHVE60DP1300 is a 5-ton (60,000 BTU) variable-speed air handler built for large homes and high-demand HVAC applications. Its ECM blower motor delivers powerful, efficient airflow while maintaining quiet operation and consistent comfort.
Designed to integrate with Goodman S-Series communicating systems, this air handler features an internal EEV, R-32 optimization, and a rigid SmartFrame™ cabinet to ensure long-term performance and reduced air leakage.
- 5 ton (60,000 BTU) nominal capacity
- High-output variable-speed ECM blower
- Internal electronic expansion valve
- All-aluminum evaporator coil
- Optimized for R-32 refrigerant
- Compatible with electric heat kits up to 25 kW
- Ideal for large homes and light commercial use
Goodman HKTS Series Electric Heat Kits for Air Handlers
Reliable electric heating solutions designed to integrate seamlessly with Goodman air handlers
Goodman HKTS Series electric heat kits provide dependable supplemental or primary electric heating when paired with compatible Goodman air handlers. Designed for use in all-electric or dual-fuel HVAC systems, these heat kits deliver consistent, evenly distributed warmth during colder months, making them an ideal solution for homes without access to natural gas or in regions requiring electric backup heat.
Available in a wide range of heating capacities, Goodman HKTS heat kits are engineered for straightforward installation and long-term reliability. Each kit is designed to integrate cleanly into the air handler cabinet, maintaining proper airflow while delivering safe, efficient electric heat. Whether used as auxiliary heat for heat pump systems or as the primary heat source, HKTS kits offer dependable performance and system compatibility.
- Compatible with select Goodman air handlers including AHVE and other multi-position models
- Multiple heating capacities available to match a wide range of system sizes and comfort needs
- Designed for electric and heat pump applications
- Provides supplemental or primary electric heating
- Engineered for proper airflow and temperature control
- Integrated safety controls for reliable operation
- Supports single-point wiring options with compatible air handlers
- Factory-designed fit for clean installation and long-term durability
- Ideal for all-electric homes or gas-restricted installations
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST
