America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Heat pumps are all electric and good for mild and cold climates.
MrCool DIY Easy Pro 18,000 BTU Mini-Split Heat Pump Wall-Mounted System with 11.5 Ft. Installation Kit - 20 SEER2, Single-Zone, 230V R454B
- Outdoor Unit: EZPRO-18-HP-C-23011DE-O
- Indoor Unit: EZPRO-18-HP-WMAH-230DE-O
- Controller: Included With Indoor Unit
- 11.5 ft. Precharged R-454B Refrigerant Quick Connect Lineset
- Communication Cable
Mini Split Sizing BTU Calculator
Use this Free & Easy Mini Split BTU Calculator to Select the Right Size Mini Split AC or Heat Pump for your Home.
When using a mini split sizing calculator for rooms below a conditioned space, apply an additional .7 factor to your final Btu outcome.
For example, if your Btu requirement via this calculator is 18,000 Btu's: 18,000 Btu's x .7 factor = 12,600 Btu's required. When in doubt, it is okay to go up a size or two. Unlike standard non-variable systems, The mini split inverter technology allows the system to adjust to the actual room requirements in both heating and cooling.
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Heat pumps are all electric and good for mild and cold climates.
As low as $1,806.00
MrCool DIY Easy Pro 18,000 BTU Mini-Split Heat Pump Condenser - 230V, R454B
Model Number
EZPRO-18-HP-C-23011DE-O
Dimensions
30.12" W x 11.93" D x 21.85" H
Documents
EZPRO-18-HP-C-23011DE-O Specifications
Warranty
5 Year Compressor | 3 Year Parts
MrCool DIY Easy Pro 18,000 BTU Mini-Split Heat Pump Wall-Mounted Air Handler - 230V, R454B
Model Number
EZPRO-18-HP-WMAH-230DE-O
Dimensions
38.23" W x 8.98" D x 12.64" H
Documents
EZPRO-18-HP-WMAH-230DE-O Specifications
Warranty
3 Year Parts
Controller
Wireless Controller Included
AHRI Number
217678024
Included Installation Kit
- 11.5 ft. pre-charged Quick Connect line set
- Communication wire included
High-Efficiency DIY Mini-Split System for Larger Residential Comfort Zones
Complete matched heating and cooling system with inverter technology, WiFi control, and dependable performance.
The MRCOOL DIY Easy Pro 18,000 BTU Mini-Split Heat Pump System combines a compatible wall-mounted indoor air handler with a matched outdoor condenser to provide efficient year-round heating and cooling for larger rooms, garages, workshops, family rooms, and open living spaces. Variable-speed DC inverter technology continuously adjusts system performance to deliver consistent comfort while reducing unnecessary energy use.
Designed for installation using compatible factory pre-charged Quick Connect® line sets, this system helps simplify installation when installed according to MRCOOL's instructions. Built-in WiFi, Follow Me® comfort technology, quiet indoor operation, washable filtration, and the outdoor unit's Gold Fin® corrosion-resistant coil work together to provide dependable performance and long-term reliability.
Features & Benefits
- Complete matched 18,000 BTU mini-split heat pump system
- Includes compatible wall-mounted indoor air handler and outdoor condenser
- 230V electrical configuration
- Designed for R-454B refrigerant
- Variable-speed DC inverter compressor technology
- Compatible with factory pre-charged Quick Connect® line sets
- Designed to simplify installation using approved MRCOOL accessories
- Built-in WiFi with MRCOOL Comfort App compatibility
- Follow Me® remote temperature sensing
- Washable air filter for convenient maintenance
- Gold Fin® corrosion-resistant outdoor coil
- Quiet operation indoors and outdoors
- Reliable heating and cooling throughout the year
- Ideal for family rooms, garages, workshops, and larger living spaces
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST