Use Code MEGA3 for an Extra 3% Off
Free Shipping On Orders Over $1500
America's Leading Discount HVAC Supplier Since 2001
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- 2.5 ton - best for spaces between 1200 -1500 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Good for extreme southern climates with very low heating demand such as south Florida and south Texas (otherwise a heat pump is the best option)
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
Intertherm 2.5 Ton AC & Downflow Electric Furnace System with Coil Cabinet for Mobile Homes - Choose a Compatible Furnace, R454B
- Condenser: HSA4ME5M1SN30K
- Electric Furnace: 10kW - 15kW Options
- Uncased Coil: C85DAMX3036U-B
- 2.5 ton - best for spaces between 1200 -1500 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Good for extreme southern climates with very low heating demand such as south Florida and south Texas (otherwise a heat pump is the best option)
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
As low as $4,726.81 was $4,848.00
Intertherm 2.5 Ton 14.3 SEER2 Air Conditioner Condenser for Mobile Homes, R454B
Model Number
HSA4ME5M1SN30K
Dimensions
31.75" W x 31.75" D x 29.25" H
Documents
Warranty
Standard: Parts: 1 year | 5 years
Registered: Parts: 5 years | 10 years
Intertherm 10 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7ED-B010K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 12 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7ED-B012K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 15 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7ED-B015K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 17 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7ED-B017K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 2.5-3 Ton Uncased A-Vertical Evaporator Coil With TXV for Mobile Home - 19-3/4-inch Cabinet Width, R454B
Model Number
C85DAMX3036U-B
Dimensions
18-1/8" W x 19-1/3" D x 18" H
Documents
Warranty
Parts: 3 year
Efficient Everyday Cooling for Lasting Manufactured-Home Comfort
Dependable 2.5-ton performance helps keep your home comfortable through hot weather.
The Intertherm HSA4ME5M1SN30K is a 2.5-ton, 30,000 BTU split-system air conditioner developed for compatible manufactured and modular home HVAC systems. Its 14.3 SEER2 rating provides an efficient cooling solution for homeowners replacing aging equipment or building a properly matched new system.
Intertherm continues the manufactured-home HVAC heritage many homeowners previously knew under the Revolv name. Designed for the unique requirements of factory-built housing, this outdoor condenser combines reliable cooling with a powder-coated galvanized-steel cabinet that helps resist corrosion, fading, scratching, and chipping.
- 2.5-ton cooling capacity: Supplies approximately 30,000 BTUs of cooling when properly sized for the home.
- 14.3 SEER2 efficiency: Helps deliver comfortable cooling without the energy demands of older, less-efficient equipment.
- R454B refrigerant: Uses a lower-global-warming-potential refrigerant designed for current HVAC systems.
- Purpose-built design: Developed for compatible manufactured and modular home applications.
- Weather-resistant construction: A powder-coated galvanized-steel exterior helps protect critical components.
- Compatible system matching: Pairs with approved Intertherm coils and furnaces to create a complete cooling system.
For homeowners seeking a durable and efficient 2.5-ton air conditioner for a factory-built home, the HSA4ME5M1SN30K offers a strong foundation for a properly matched Intertherm system. A qualified HVAC professional should verify sizing, component compatibility, and installation requirements.
Dependable Downflow Electric Heating for Factory-Built Homes
Comfortable, all-electric heat designed for homes with ductwork located beneath the furnace.
The Intertherm E7ED Series Electric Furnace provides dependable heating for compatible manufactured and mobile homes with downflow duct systems. In a downflow installation, heated air moves from the furnace into ductwork located beneath the unit, making this configuration a practical replacement choice for many factory-built homes.
Available in heating capacities from 10 to 23 kW, the E7ED family makes it easier to match the furnace to the home’s heating requirements. Its compact cabinet supports installation in common manufactured-home utility spaces, while front service access helps qualified HVAC professionals perform routine inspection and maintenance.
- Downflow Configuration: Designed to deliver heated air into ductwork below the furnace.
- Multiple Heating Capacities: Available in 10, 12, 15, 17, 20 and 23 kW models.
- All-Electric Operation: Provides heat without an onsite gas burner or combustion flue.
- Compact Cabinet: Designed for the space requirements commonly found in factory-built homes.
- Front Service Access: Helps simplify professional inspection and maintenance.
- Cooling-System Compatibility: Can support a matched central air-conditioning installation when paired with approved components.
The Intertherm E7ED Series was formerly sold under the Revolv brand. Choose the appropriate model based on the required heating capacity, electrical service and compatible cooling equipment, and have the system sized and installed by a qualified HVAC professional.
Flexible Indoor Coil Capacity for Reliable Manufactured-Home Comfort
One efficient coil supports approved 2.5- and 3-ton system combinations.
The Intertherm C85DAMX3036U-B is an uncased indoor evaporator coil designed for compatible 2.5- and 3-ton manufactured or modular home HVAC systems. Its nominal capacity range of 30,000 to 36,000 BTUs allows the coil to serve multiple approved equipment combinations when properly matched with the correct outdoor unit and furnace.
Intertherm continues the manufactured-home HVAC legacy previously recognized under the Revolv name. The C85 coil uses micro-channel construction for effective heat transfer and includes a factory-installed TXV that adjusts refrigerant flow according to system demand, helping the matched system operate consistently and efficiently.
- 2.5- to 3-ton capacity range: Supports approved systems with approximately 30,000 to 36,000 BTUs of nominal capacity.
- R454B refrigerant design: Built specifically for compatible current-generation R454B systems.
- Micro-channel technology: Promotes efficient heat transfer in a compact indoor coil.
- Factory-installed TXV: Regulates refrigerant flow to support proper system performance across changing conditions.
- Vertical A-coil design: Engineered for compatible manufactured and modular home furnace applications.
- Uncased configuration: Installs within an approved furnace or coil cabinet for a space-conscious system layout.
- Matched-system flexibility: Can support more than one nominal capacity when paired according to certified equipment combinations.
The C85DAMX3036U-B provides useful system-matching flexibility for homeowners replacing or assembling a 2.5- or 3-ton manufactured-home HVAC system. Final capacity, airflow, furnace compatibility, A2L safety requirements, and the certified outdoor-unit match must be confirmed by a qualified HVAC professional.
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST