Use Code MEGA3 for an Extra 3% Off
Free Shipping On Orders Over $1500
America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- 2 ton - best for spaces between 1000 - 1200 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Heat pumps are all electric and good for mild and cold climates.
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
Intertherm 2 Ton Heat Pump & Upflow Electric Furnace System with Coil Cabinet for Mobile Homes - Choose a Compatible Furnace, R454B
- Condenser: HSH4ME5M1SP24K
- Electric Furnace Options: 10kW - 15kW
- Uncased Coil: C85DAMX24U-B
- 2 ton - best for spaces between 1000 - 1200 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Heat pumps are all electric and good for mild and cold climates.
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
As low as $4,926.69 was $5,053.00
Intertherm 2 Ton 14.3 SEER2 Heat Pump for Mobile Homes, R454B
Model Number
HSH4ME5M1SP24K
Dimensions
31.75" W x 31.75" D x 33" H
Documents
Warranty
Standard: Parts: 1 year | 5 years
Registered: Parts: 5 years | 10 years
Intertherm 10 kW Electric Furnace for Mobile Homes - Upflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7EU-B010K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 12 kW Electric Furnace for Mobile Homes - Upflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7EU-B012K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 15 kW Electric Furnace for Mobile Homes - Upflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7EU-B015K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 2 Ton Uncased A-Vertical Evaporator Coil With TXV for Mobile Home - 19-3/4-inch Cabinet Width, R454B
Model Number
C85DAMX24U-B
Dimensions
18-1/8" W x 19-1/2" D x 18" H
Documents
Warranty
Parts: 3 year
Year-Round Comfort Designed for Factory-Built Homes
Efficient 2-ton heating and cooling helps keep your home comfortable through every season.
The Intertherm HSH4ME5M1SP24K is a 2-ton, 24,000 BTU split-system heat pump designed for compatible manufactured and modular home HVAC systems. It cools the home during warm weather and reverses operation to provide energy-efficient heating when temperatures drop, giving homeowners one outdoor unit for year-round comfort.
For customers familiar with the former Revolv product line, Intertherm now carries that manufactured-home HVAC tradition forward. This heat pump combines a 14.3 SEER2 cooling rating and 7.5 HSPF2 heating rating with a scroll compressor designed to support dependable, quieter operation. Its durable outdoor construction helps protect the unit against harsh weather and everyday wear.
- 2-ton capacity: Provides approximately 24,000 BTUs of heating and cooling for properly sized applications.
- Year-round operation: Supplies cooling during summer and efficient heat-pump heating during cooler weather.
- 14.3 SEER2 cooling efficiency: Helps reduce cooling energy use compared with many older systems.
- 7.5 HSPF2 heating efficiency: Measures efficient seasonal heat-pump performance.
- R454B refrigerant: Uses a current-generation refrigerant with lower global warming potential than R410A.
- Scroll compressor: Supports smooth, dependable, and quieter equipment operation.
- Weather-resistant protection: Durable cabinet construction and Guardian Seal protection help defend the unit from outdoor conditions.
- Matched-system compatibility: Designed to operate with an approved Intertherm C85DA indoor coil and compatible furnace.
The HSH4ME5M1SP24K is a practical choice for homeowners who need properly sized 2-ton heating and cooling in a factory-built home. A professional load calculation and approved equipment match are required to ensure the system provides the expected comfort, efficiency, and reliability.
Efficient Upflow Electric Comfort in a Space-Saving Cabinet
Reliable electric heating for homes that distribute conditioned air through overhead ductwork.
The Intertherm E7EU Series Electric Furnace is designed for compatible manufactured and mobile homes with upflow duct systems. Heated air moves upward from the furnace into ductwork above the unit, making the E7EU a suitable choice when the home’s existing HVAC layout requires an upflow configuration.
Heating capacities from 10 to 23 kW provide options for different home sizes, climates and heating loads. The compact cabinet is designed for factory-built housing applications, while front service access helps qualified technicians reach the internal components for installation and maintenance.
- Upflow Configuration: Delivers heated air into ductwork located above the furnace.
- Multiple Heating Capacities: Available in 10, 12, 15, 17, 20 and 23 kW models.
- All-Electric Heating: Does not require an onsite gas burner or combustion vent.
- Factory-Built Housing Design: Sized for common manufactured-home installation spaces.
- Accessible Cabinet: Front access supports professional service and inspection.
- Matched Cooling Capability: Can be paired with approved air-conditioning components for year-round comfort.
The Intertherm E7EU Series was formerly offered under the Revolv brand. Verify the home’s airflow orientation, electrical requirements, heating load and approved component matches before selecting a furnace.
Efficient Indoor Cooling Performance for Factory-Built Homes
A compact 2-ton indoor coil designed to support dependable comfort and proper refrigerant control.
The Intertherm C85DAMX24U-B is a 2-ton, 24,000 BTU uncased indoor evaporator coil designed for compatible manufactured and modular home HVAC systems. Installed with an approved outdoor air conditioner or heat pump and furnace, the coil transfers heat between the refrigerant and indoor air to help cool or heat the home.
For homeowners familiar with the former Revolv product line, Intertherm now carries that manufactured-home HVAC tradition forward. This vertical A-coil uses micro-channel technology and includes a factory-installed thermal expansion valve, commonly called a TXV, to regulate refrigerant flow as operating conditions change.
- 2-ton capacity: Supports properly matched systems with approximately 24,000 BTUs of nominal capacity.
- R454B compatibility: Designed for current R454B air-conditioning and heat-pump systems.
- Micro-channel coil: Provides efficient heat transfer through a compact indoor coil design.
- Factory-installed TXV: Precisely controls refrigerant flow to support consistent system performance and efficiency.
- Vertical A-coil configuration: Designed for installation with compatible manufactured-home furnace and indoor equipment arrangements.
- Uncased construction: Fits inside an approved furnace or coil cabinet rather than adding a separate exterior cabinet.
- Down-turn connections: Braze connections are positioned to support the intended manufactured-home installation layout.
The C85DAMX24U-B is a practical indoor-coil choice when building or replacing a properly matched 2-ton Intertherm system. A qualified HVAC professional must verify the outdoor unit, furnace, A2L safety components, airflow, and certified equipment match before installation.
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST