Use Code MEGA3 for an Extra 3% Off
Free Shipping On Orders Over $1500
America's Leading Discount HVAC Supplier Since 2001
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Heat pumps are all electric and good for mild and cold climates.
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
- This includes a heat pump condenser outdoor unit and a heat pump evaporator coil to insert into your suitable electric furnace
Intertherm 3.5 Ton 14.3 SEER2 Heat Pump & Coil Add-On for Existing Mobile Home Furnaces, R454B
- Condenser: HSH4ME5M1SP42K
- Uncased Coil: C85DAMX42U-B
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Heat pumps are all electric and good for mild and cold climates.
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
- This includes a heat pump condenser outdoor unit and a heat pump evaporator coil to insert into your suitable electric furnace
As low as $4,558.13 was $4,675.00
Intertherm 3.5 Ton 14.3 SEER2 Heat Pump for Mobile Homes, R454B
Model Number
HSH4ME5M1SP42K
Dimensions
31.75" W x 31.75" D x 45" H
Documents
Warranty
Standard: Parts: 1 year | 5 years
Registered: Parts: 5 years | 10 years
Intertherm 4 Ton Uncased A-Vertical Evaporator Coil With TXV for Mobile Home - 19-3/4-inch Cabinet Width, R454B
Model Number
C85DAMX48U-B
Dimensions
18-1/8" W x 19-1/6" D x 25" H
Documents
Warranty
Parts: 3 year
AHRI Number
217179931
Dependable All-Season Performance for Greater Home Comfort
Powerful 3.5-ton heating and cooling supports comfort through summer heat and cooler seasonal weather.
The Intertherm HSH4ME5M1SP42K is a 3.5-ton, 42,000 BTU split-system heat pump developed for compatible manufactured and modular home HVAC systems. It cools the home during warm weather and reverses the refrigerant cycle to provide efficient heating during cooler conditions.
Intertherm continues the manufactured-home HVAC heritage many customers previously recognized as Revolv. Rated at 14.3 SEER2 for cooling and 7.5 HSPF2 for heating, the HSH4ME provides efficient year-round performance. Its scroll compressor promotes smooth, dependable operation, while Guardian Seal and durable exterior construction help protect the equipment from harsh outdoor conditions.
- 3.5-ton capacity: Provides approximately 42,000 BTUs of heating and cooling for properly sized homes.
- One system for every season: Delivers cooling in warm weather and heat-pump heating during cooler months.
- 14.3 SEER2 cooling performance: Supports efficient air-conditioning operation throughout the cooling season.
- 7.5 HSPF2 heating performance: Helps homeowners receive efficient seasonal heating from the heat pump.
- R454B refrigerant: Uses a current refrigerant with lower global warming potential than R410A.
- Scroll compressor design: Supports reliable performance and quieter operation.
- Outdoor durability: Guardian Seal protection helps resist corrosion, fading, chipping, scratching, and weather exposure.
- Compatible system components: Designed to pair with an approved Intertherm C85DA coil and compatible furnace.
For a factory-built home requiring 3.5-ton capacity, the HSH4ME5M1SP42K offers efficient heating and cooling in one durable outdoor unit. A qualified HVAC professional should confirm equipment sizing, component compatibility, and installation requirements.
Year-Round Indoor Heat Transfer for 3.5-Ton Heat Pump Systems
A heat-pump-specific indoor coil designed to support efficient cooling and heating.
The Intertherm C85DAMX43U-B is a 3.5-ton, 42,000 BTU uncased indoor coil designed specifically for compatible manufactured and modular home heat-pump systems. Unlike a cooling-only evaporator coil, this model supports refrigerant heat transfer during both summer cooling and heat-pump heating operation.
Intertherm continues the factory-built home HVAC legacy previously associated with the Revolv name. This vertical A-coil combines micro-channel construction with a factory-installed TXV to manage R454B refrigerant flow, helping an approved matched heat-pump system provide dependable year-round comfort.
- 3.5-ton nominal capacity: Supports approved heat-pump systems with approximately 42,000 BTUs of capacity.
- Heat-pump application: Designed to support both cooling and heating in compatible split heat-pump systems.
- R454B refrigerant design: Built for approved current-generation R454B equipment.
- Micro-channel coil: Provides effective heat transfer during cooling and heating operation.
- Factory-installed TXV: Precisely regulates refrigerant flow as system conditions change.
- Vertical uncased configuration: Installs within a compatible manufactured-home furnace or coil cabinet.
- Purpose-built equipment match: Designed for approved Intertherm heat pumps rather than cooling-only outdoor units.
The C85DAMX43U-B is the appropriate 3.5-ton coil when an approved Intertherm heat-pump match requires this model. It should not be substituted with the C85DAMX42U-B cooling-only coil solely because both have similar nominal capacity. Professional match verification and installation are required.
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST