America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- 3 ton - best for spaces between 1500 - 1800 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
Revolv 3 Ton Mobile Home AC And 96% AFUE Two Stage Gas Furnace System | 14.3 SEER2 | Front Return Downflow With Coil Cabinet | Select Your Furnace | R454B
- Condenser: HSA4ME5M1SN36K
- Gas Furnace Options: 60000 Or 72000 BTU
- Select A Concentric Vent Kit
- Uncased Coil: C85DAMX3036U-B
- 3 ton - best for spaces between 1500 - 1800 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Best for cold climates and if you already have a gas furnace or a gas fuel supply already available.
- You'll need about 25-30 Btu's per sq. foot for warmer winter climates and about 35-50 Btu's per sq. foot for colder winter climates - highly dependent on construction type and insulation values.
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
As low as $7,278.38 was $7,465.00
Revolv 3 Ton Mobile Home Air Condtioning Condenser | 14.3 SEER2 | R454B
Model Number
HSA4ME5M1SN36K
Dimensions
31-3/4" W x 31-3/4" D x 37-1/4" H
Documents
Warranty
Parts: 5 years | Compressor: 10 years | Labor: 1 year
Revolv 60000 BTU 96% AFUE Two Stage Gas Furnace For Mobile Homes | Front Return Downflow | With Cabinet For 18" High Coil | R454B
Model Number
MG2S-B060F2ABM1
Dimensions
21-1/2" W x 24-5/8" D x 76" H
Documents
MG2S-B060F2ABM1 Specifications
Warranty
Parts: 5 years | Heat Exchanger: 20 years | Labor: 1 year
Revolv 72000 BTU 96% AFUE Two Stage Gas Furnace For Mobile Homes | Front Return Downflow | With Cabinet For 18" High Coil | R454B
Model Number
MG2S-B072F2ABM1
Dimensions
21-1/2" W x 24-5/8" D x 76" H
Documents
MG2S-B072F2ABM1 Specifications
Warranty
Parts: 5 years | Heat Exchanger: 20 years | Labor: 1 year
Revolv 2" Diameter Concentric Vent Kit For Mobile Homes Gas Furnaces
Model Number
904952
Diameter
2"
Warranty
Parts: 1 year
Revolv 3" Diameter Concentric Vent Kit For Mobile Homes Gas Furnaces
Model Number
904953
Diameter
3"
Warranty
Parts: 1 year
Revolv 2.5 - 3 Ton Mobile Home Evaporator Coil | Uncased Coil For Mobile & Manufactured Homes
Model Number
C85DAMX3036U-B
Dimensions
18-1/8" W x 19-1/2" D x 18" H
Documents
Warranty
Parts: 5 years | Labor: 1 year
HSA4ME5M1SN36K Overview
HSA4ME5M1SN36K – 3 Ton 14.3 SEER2 Air Conditioner
The HSA4ME5M1SN36K is a 3-ton air conditioner with a cooling capacity of 35,000 BTU, perfect for larger mobile homes. It combines energy efficiency, quiet operation, and rugged construction to deliver long-lasting performance.
This model includes a removable top grille, high-pressure safety switch, and factory-installed filter drier, ensuring both safety and ease of maintenance.
Key Features & Benefits
- Energy-Efficient Performance - Rated up to 14.3 SEER2 and 11.7 EER2, these units help reduce energy bills while maintaining consistent indoor comfort.
- Designed for Manufactured Housing - Pre-charged for 20 feet of lineset, making installation faster and easier for mobile and modular homes.
- Durable, Weather-Resistant Construction - Galvanized steel cabinet with powder-coated finish resists rust, fading, and scratches. Composite base pan absorbs sound and resists corrosion.
- Quiet, Reliable Operation - Equipped with a scroll compressor and permanently lubricated PSC motor for smooth, low-noise performance and long-lasting reliability.
- Easy Maintenance & Service Access - Features like removable top grille, full-service valves, and side-access panels simplify servicing and reduce downtime.
- All-Aluminum Coils - Provide superior corrosion resistance and long-term durability, especially in coastal or humid environments.
- Built-In Safety Features - Includes a high-pressure switch and liquid line filter drier to protect the system and ensure optimal performance.
- Multiple Capacity Options - Available in 24K, 30K, 36K, 42K, 48K, and 60K BTU models to suit a wide range of home sizes and cooling needs.
- AHRI Certified - All models are AHRI-rated and tested for performance and efficiency, ensuring compliance with industry standards.
Revolv MG2S Series 96% AFUE Mobile Home Gas Furnaces Overview
High-Efficiency, Two-Stage Heating for Mobile and Manufactured Homes
The Revolv MG2S Series is a top-tier line of 96% AFUE-rated gas furnaces designed for mobile and manufactured homes. With both front and top return configurations, these furnaces offer maximum installation flexibility, ultra-efficient performance, and quiet, reliable comfort for homes of all sizes.
Key Features:
- 96% AFUE Efficiency: Converts 96% of fuel into heat, minimizing energy waste
- Two-Stage Gas Valve: Adjusts heat output for better comfort and energy savings
- Multi-Speed ECM Blower Motor: Delivers consistent airflow and quiet operation
- AC-Ready Design: Compatible with up to 4-ton cooling systems (R410A & R454B)
- Sealed Combustion System: Uses outside air for combustion, improving indoor air quality
- Direct Vent Approved: Supports both vertical and horizontal venting
- LP Convertible: Includes easy-to-install propane conversion kit
- Smart Diagnostics: LED indicators simplify troubleshooting and maintenance
- Durable Heat Exchangers: Aluminized primary and stainless steel secondary for long life
- Fully Insulated Cabinet: Reduces heat loss and operating noise
Benefits for Homeowners:
- Lower Heating Bills: High-efficiency design reduces monthly energy costs
- Quiet Comfort: Advanced burner and blower design keeps noise to a minimum
- Flexible Installation: Choose front or top return to match your home’s layout
- Reliable Performance: Built with premium components and tested for quality
- Easy Maintenance: Smart diagnostics and accessible design simplify service
- Peace of Mind: Backed by a 20-year heat exchanger and 5-year parts warranty
Perfect For:
- Mobile and manufactured homes of all sizes
- Homeowners upgrading from older, less efficient furnaces
- Installations requiring front or top return airflow
- Systems needing compatibility with modern refrigerants (R410A, R454B)
Revolv Concentric Vent Kits for Mobile Home Gas Furnaces Overview
Safe, Space-Saving Venting for High-Efficiency Furnaces
Ensure safe and efficient venting for your mobile or manufactured home gas furnace with the Revolv Concentric Vent Kits. Designed for use with Revolv MG2R and MG2S high-efficiency furnaces, these kits combine intake and exhaust into a single pipe, simplifying installation and saving valuable space.
Key Features:
- Model 904952: 2-inch diameter, ideal for standard venting distances
- Model 904953: 3-inch diameter, perfect for larger systems or longer vent runs
- Concentric Design: Combines air intake and exhaust into one pipe for cleaner, more compact installation
- Compatible with MG2R & MG2S Furnaces: Designed specifically for Revolv’s high-efficiency mobile home furnace lines
- Durable Construction: Built to withstand outdoor elements and long-term use
- Easy Installation: Reduces the number of wall or roof penetrations needed
- UL Listed & Code Compliant: Meets safety standards for manufactured housing
Benefits for Homeowners:
- Simplified Installation: Fewer parts and penetrations make setup faster and easier
- Space-Saving Design: Ideal for tight spaces in mobile and modular homes
- Improved Aesthetics: Clean, single-pipe look on the exterior of the home
- Enhanced Safety: Sealed combustion system keeps combustion air separate from indoor air
- Flexible Sizing: Choose 2" or 3" based on your furnace size and venting needs
Perfect For:
- Mobile and manufactured homes using Revolv MG2R or MG2S furnaces
- Installations requiring compact, efficient venting solutions
- HVAC professionals seeking code-compliant, easy-to-install vent kits
C85DAMX42U-B Overview
C85DAMX42U-B – 3.5 Ton Uncased Indoor Coil
The C85DAMX42U-B is a 3.5-ton indoor coil designed for high-performance HVAC systems in manufactured housing. It features a TXV metering device, micro-channel aluminum coil, and uncased vertical design, making it a reliable and adaptable component for cooling and heat pump applications.
Features & Benefits
- High Capacity: Supports up to 42,000 BTU systems
- Micro-Channel Technology: Reduces refrigerant use and improves efficiency
- Uncased Flexibility: Fits custom or space-constrained installations
- Durable Drain Pan Design: Engineered for long-term moisture management
- R454B Ready: Compatible with modern refrigerant standards
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST