Use Code FALL3 for an Extra 3% Off
Free Shipping On Orders Over $1500
America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Heat pumps are all electric and good for mild and cold climates.
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
- This includes a heat pump condenser outdoor unit and a heat pump evaporator coil to insert into your suitable electric furnace
Intertherm 4 Ton 14.3 SEER2 Heat Pump & Coil Add-On for Existing Mobile Home Furnaces, R454B
- Condenser: HSH4ME5M1SP48K
- Uncased Coil: C85DAMX48U-B
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Heat pumps are all electric and good for mild and cold climates.
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
- This includes a heat pump condenser outdoor unit and a heat pump evaporator coil to insert into your suitable electric furnace
As low as $4,848.68 was $4,973.00
Intertherm 4 Ton 14.3 SEER2 Heat Pump for Mobile Homes, R454B
Model Number
HSH4ME5M1SP48K
Dimensions
31.75" W x 31.75" D x 45" H
Documents
Warranty
Standard: Parts: 1 year | 5 years
Registered: Parts: 5 years | 10 years
Intertherm 4-5 Ton Uncased A-Vertical Evaporator Coil With TXV for Mobile Home - 19-3/4-inch Cabinet Width, R454B
Model Number
C85DAMX4960U-B
Dimensions
18-1/8" W x 19-1/7" D x 29" H
Documents
Warranty
Parts: 3 year
AHRI Number
High-Capacity Heating and Cooling Built for Year-Round Reliability
Efficient 4-ton performance delivers dependable comfort for properly sized factory-built homes.
The Intertherm HSH4ME5M1SP48K is a 4-ton, 48,000 BTU split-system heat pump engineered for compatible manufactured and modular home HVAC installations. It provides substantial cooling capacity during hot weather while also operating as an efficient heating system when temperatures fall.
For homeowners familiar with equipment formerly sold under the Revolv name, Intertherm now carries that factory-built home HVAC tradition forward. This model offers 14.3 SEER2 cooling efficiency and 7.5 HSPF2 heating efficiency. Its scroll compressor helps support reliable, quieter operation, while Guardian Seal and durable cabinet construction protect the outdoor equipment from weather-related wear.
- 4-ton capacity: Supplies approximately 48,000 BTUs of heating and cooling for higher-capacity applications.
- Year-round home comfort: Combines summer air conditioning and efficient heat-pump heating in one system.
- 14.3 SEER2 cooling efficiency: Helps deliver strong cooling performance while managing seasonal energy consumption.
- 7.5 HSPF2 heating efficiency: Supports efficient heat-pump operation during cooler weather.
- R454B refrigerant: Uses a modern refrigerant with lower global warming potential than R410A.
- Scroll compressor: Provides smooth, durable, and quieter operation.
- Guardian Seal protection: Helps protect the outdoor unit against corrosion, fading, scratching, and chipping.
- Matched-system design: Works with approved Intertherm C85DA coils and compatible furnace equipment.
The HSH4ME5M1SP48K provides a durable all-season solution for manufactured or modular homes that require 4-ton capacity. Professional load calculation, approved indoor-equipment matching, and qualified installation are necessary to achieve the expected comfort and efficiency.
High-Capacity Indoor Cooling Designed for Factory-Built Homes
Efficient 4-ton heat transfer supports dependable cooling in properly matched air-conditioning systems.
The Intertherm C85DAMX48U-B is a 4-ton, 48,000 BTU uncased indoor evaporator coil developed for compatible manufactured and modular home air-conditioning systems. This model is intended for cooling-only applications and works with an approved outdoor air conditioner and compatible indoor furnace.
For homeowners familiar with the former Revolv equipment line, Intertherm now carries that manufactured-home HVAC tradition forward. Its micro-channel A-coil design efficiently transfers indoor heat to the R454B refrigerant, while the factory-installed TXV regulates refrigerant flow to support consistent cooling performance.
- 4-ton cooling capacity: Supports approved air-conditioning systems with approximately 48,000 BTUs of nominal capacity.
- Cooling-only design: Intended for compatible air-conditioner combinations rather than heat-pump applications.
- R454B compatibility: Engineered for current R454B split-system equipment.
- Micro-channel construction: Supports efficient heat transfer through a compact indoor coil design.
- Factory-installed TXV: Adjusts refrigerant flow to help maintain proper system performance.
- Vertical A-coil configuration: Designed for compatible manufactured-home furnace and airflow arrangements.
- Uncased installation: Fits inside an approved furnace or coil cabinet without an additional outer casing.
The C85DAMX48U-B provides the indoor heat-transfer component needed for an approved 4-ton Intertherm cooling system. Because this model is designed for air-conditioning applications, a qualified HVAC professional should verify the outdoor condenser, furnace, airflow, and certified coil match before purchase.
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST