Use Code MEGA3 for an Extra 3% Off
Free Shipping On Orders Over $1500
America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Ask an Expert
866 862 8922
Hours of Operation 8am - 8pm EST
8am - 8pm EST
- 5 ton - best for spaces between 2400- 3000 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Good for extreme southern climates with very low heating demand such as south Florida and south Texas (otherwise a heat pump is the best option)
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
Intertherm 5 Ton AC & Downflow Electric Furnace System with Coil Cabinet for Mobile Homes - Choose a Compatible Furnace, R454B
- Condenser: HSA4ME5M1SN60K
- Electric Furnace: 10kW - 15kW Options
- Uncased Coil: C85DAMX4960U-B
- 5 ton - best for spaces between 2400- 3000 sq ft depending on your home's insulation and your climate
- SEER2 rating helps consumers compare energy efficiency when choosing a new air conditioner. Higher SEER2 ratings mean significant utility savings. The federal minimum is 14 SEER2 with ratings into the 20 SEER2 range. A 20 SEER2 uses half the energy of a 10 seer much like MPG ratings for vehicles.
- Good for extreme southern climates with very low heating demand such as south Florida and south Texas (otherwise a heat pump is the best option)
- If you have a mobile home be sure the equipment is designed specifically for mobile homes or it will NOT work properly
As low as $6,442.80 was $6,608.00
Intertherm 5 Ton 14.3 SEER2 Air Conditioner Condenser for Mobile Homes, R454B
Model Number
HSA4ME5M1SN60K
Dimensions
31.75" W x 31.75" D x 45.25" H
Documents
Warranty
Standard: Parts: 1 year | 5 years
Registered: Parts: 5 years | 10 years
Intertherm 17 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7ED-B017K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 20 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7ED-B020K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 23 kW Electric Furnace for Mobile Homes - Downflow, R410 & R454B Compatible, With Factory-Installed Coil Cabinet
Model Number
E7ED-B023K1
Dimensions
20" W x 24-1/2" D x 60" H
Documents
Warranty
Standard: Parts: 1 year
Registered: Parts 5 year
Intertherm 4-5 Ton Uncased A-Vertical Evaporator Coil With TXV for Mobile Home - 19-3/4-inch Cabinet Width, R454B
Model Number
C85DAMX4960U-B
Dimensions
18-1/8" W x 19-1/7" D x 29" H
Documents
Warranty
Parts: 3 year
Powerful Cooling Capacity with Purpose-Built Outdoor Durability
Efficient 5-ton performance provides reliable comfort for properly sized factory-built homes.
The Intertherm HSA4ME5M1SN60K is a 5-ton, 60,000 BTU split-system air conditioner engineered for compatible manufactured and modular home HVAC applications. As the largest-capacity model in the HSA4ME series, it provides substantial cooling performance with a 14.3 SEER2 efficiency rating.
Intertherm carries forward the manufactured-home HVAC experience previously associated with the Revolv product line. This condenser is specifically designed for factory-built housing and protected by a powder-coated galvanized-steel cabinet that helps resist outdoor corrosion, fading, scratching, and chipping.
- 5-ton cooling capacity: Supplies approximately 60,000 BTUs of cooling for applications that require higher-capacity equipment.
- 14.3 SEER2 efficiency: Helps deliver strong cooling performance while managing seasonal energy consumption.
- R454B refrigerant: Uses a modern refrigerant with lower global warming potential than R410A.
- Manufactured-home design: Purpose-built for compatible factory-built and modular home HVAC systems.
- Outdoor protection: A powder-coated galvanized-steel cabinet helps shield the unit from weather and physical wear.
- Matched-system operation: Designed for use with approved Intertherm indoor coils and furnace equipment.
The HSA4ME5M1SN60K is a strong choice when a professional load calculation confirms that a full 5 tons of cooling is appropriate for the home. Correct indoor-equipment matching and professional installation are required to ensure reliable performance, comfort, and efficiency.
Dependable Downflow Electric Heating for Factory-Built Homes
Comfortable, all-electric heat designed for homes with ductwork located beneath the furnace.
The Intertherm E7ED Series Electric Furnace provides dependable heating for compatible manufactured and mobile homes with downflow duct systems. In a downflow installation, heated air moves from the furnace into ductwork located beneath the unit, making this configuration a practical replacement choice for many factory-built homes.
Available in heating capacities from 10 to 23 kW, the E7ED family makes it easier to match the furnace to the home’s heating requirements. Its compact cabinet supports installation in common manufactured-home utility spaces, while front service access helps qualified HVAC professionals perform routine inspection and maintenance.
- Downflow Configuration: Designed to deliver heated air into ductwork below the furnace.
- Multiple Heating Capacities: Available in 10, 12, 15, 17, 20 and 23 kW models.
- All-Electric Operation: Provides heat without an onsite gas burner or combustion flue.
- Compact Cabinet: Designed for the space requirements commonly found in factory-built homes.
- Front Service Access: Helps simplify professional inspection and maintenance.
- Cooling-System Compatibility: Can support a matched central air-conditioning installation when paired with approved components.
The Intertherm E7ED Series was formerly sold under the Revolv brand. Choose the appropriate model based on the required heating capacity, electrical service and compatible cooling equipment, and have the system sized and installed by a qualified HVAC professional.
Flexible High-Capacity Performance for Larger Manufactured-Home Systems
An R454B micro-channel coil designed to support approved 4- and 5-ton equipment combinations.
The Intertherm C85DAMX4960U-B is a high-capacity uncased indoor coil designed for compatible 4- and 5-ton manufactured or modular home HVAC systems. Its nominal operating range supports approved equipment combinations from approximately 48,000 to 60,000 BTUs when matched with the correct outdoor unit and furnace.
Intertherm carries forward the manufactured-home HVAC experience many customers previously knew through the Revolv product line. This vertical A-coil uses micro-channel technology and a factory-installed TXV to manage R454B refrigerant flow, helping the complete matched system deliver dependable comfort and efficient heat transfer.
- 4- to 5-ton capacity range: Supports approved systems with approximately 48,000 to 60,000 BTUs of nominal capacity.
- R454B system compatibility: Designed for current-generation R454B air-conditioning and approved heat-pump combinations.
- Micro-channel coil design: Provides effective heat transfer for higher-capacity residential HVAC systems.
- Factory-installed TXV: Regulates refrigerant flow to support proper operation across changing system conditions.
- Vertical uncased construction: Installs within an approved manufactured-home furnace or coil cabinet.
- High-capacity flexibility: Can serve different certified equipment combinations without assuming every 4- or 5-ton outdoor unit is interchangeable.
- Factory-built home application: Engineered around the specialized space and equipment requirements of manufactured housing.
The C85DAMX4960U-B offers useful flexibility for larger manufactured-home HVAC systems, but the exact application depends on the approved outdoor unit, furnace, airflow, and certified system rating. A qualified HVAC professional must verify the complete match and required R454B/A2L safety components before installation.
Who installs the AC unit after I purchase it?
ACDirect does not yet provide installation services directly. However, most of our customers successfully arrange installation through local licensed HVAC contractors. These systems are designed for professional installation and typically include the components your installer will need.
Here’s how it works:
- Hire a licensed HVAC technician in your area
- Use platforms like Angi, Thumbtack, or a local HVAC directory to find reliable professionals
- Confirm your installer is experienced with the system type you’re purchasing
Note:
Please be aware if you choose to install HVAC equipment yourself and don’t possess proper HVAC licensing, you will void the manufacturer’s factory warranty. If you are capable of a factory-compliant installation yourself, you will need a licensed HVAC contractor to sign off on your work, fully confirming factory-compliant workmanship.
Need help? Contact Our Experts
(866)-862-8922
Hours:
Monday - Friday: 8am to 9pm EST
Saturday: 8am to 8pm EST
Sunday: 11am to 8pm EST