Toggle Nav
America's Leading Discount HVAC Supplier Since 2001 ...
and now, NASCAR Racing Sponsor
Goodman 5 Ton 14 SEER2 120000 BTU 92% Single Stage Natural Gas System Horizontal
- Condenser: GSXN406010
- Furnace: GM9S921205DN
- Evaporator Coil: CHPT4860D4
Goodman 5 Ton 14.3 SEER2 Straight Cool Condenser Value Line
Model Number
GSXN406010
Dimensions
35-1/2" W x 35-1/2" D x 36-1/2" H
Documents
Limited Warranty
10 years
Goodman GM9S 120000 BTU 92% Natural Gas Furnace Single Stage Upflow/Horizontal
Model Number
GM9S921205DN
Dimensions
24-1/2" W x 28-7/8" D x 34-1/2" H
Documents
Warranty
Heat Exchanger: Limited Lifetime | Parts: 10 years
Goodman 4-5 Ton Evaporator Coil with TXV Built in Horizontal 24"
Model Number
CHPT4860D4
Dimensions
26" W x 21 1/8" D x 24.5" H
Documents
Limited Warranty
10 years
AHRI
208800569
GSXN4 Condenser
Standard Features
- Energy-Efficient Compressor
- Copper tube/ enhanced aluminum fin coil-5mm diameter on 1.5-4.0T
- Factory-installed filter drier
- Fully charged for 15’ of tubing length
- Service valves with sweat connections and easy-to-access gauge ports
- Contactor with lug connection
- Ground lug connection
- AHRI Certified; ETL Listed
Cabinet Features
- Removable grille style top style grill design compatible with UL 60335-2-40
- Heavy-gauge galvanized-steel cabinet
- Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval
- Steel louver coil guard
- Single-panel access to controls with space provided for field-installed accessories
- When properly anchored, meets the 2020 Florida Building Code unit integrity requirements for hurricane-type winds (Anchor bracket kits available.)
Goodman GM9S92 Single-Stage, Multi-Speed Gas Furnace Features
Standard
- Heavy-duty aluminized-steel tubular heat exchanger
- Stainless-steel secondary heat exchanger
- Single-stage gas valve
- Durable Silicon Nitride igniter
- Multi-speed ECM blower motor
- Quiet single-speed induced draft blower
- Self-diagnostic control board
- All models comply with California 40 ng/J Low NOx emissions standard• For installation in California’s South Coast Air Quality Management District (SCAQMD) only: This furnace does not meet the SCAQMD Rule 1111 14 ng/J NOx emission limit, and thus is subject to a mitigation fee of up to $450. This furnace is not eligible for the SCAQMD Clean Air Furnace Rebate Program: www.CleanAirFurnaceRebate.com.
- AHRI Certified; ETL Listed
Cabinet
- Designed for multi-position installation — GM9S92: upflow, horizontal left or right
- Certified for direct vent (2-pipe) or non-direct vent (1-pipe)
- Easy-to-install top venting with optional side venting — GM9S92/upflow models only
- Convenient left or right connection for gas and electrical service
- Cabinet air leakage (QLeak) ≤ 2%
- Heavy-gauge steel cabinet with durable finish
- Foil-faced insulated heat exchanger cabinet
- Airtight solid bottom or side return with easy-cut tabs for effortless removal in bottom air-inlet applications
CHPTA Indoor Coil
Standard Features
- All-Aluminum evaporator coil
- Optimized for use with R-410A refrigerant
- Some models suitable for use with R-410A or R-22 refrigerant
- CAPT, CAPTA, CHPT, CHPTA models feature factory-installed thermal expansion valves for cooling and heat pump applications
- CAPF, CAPFA, CAUF, CAUFA, CHPF, CSCF models feature a check flowrator for cooling and heat pump applications
- Vertical and horizontal models available
- 21” depth for easier attic access
- Foil-faced insulation covers the internal casing to reduce cabinet condensation
- Galvanized, leather grain-embossed finish
- Rust resistant, thermoplastic drain pans featuring a low water-retention design
- DecaBDE-free thermoplastic drain pan with secondary drain connections
- UV-resistant drain pan
- AHRI Certified; ETL Listed
We found other products you might like!
FREE
SHIPPING
DELIVERY TIME
5-7 BUSINESS DAYS
PROFESSIONAL
SUPPORT STAFF
ADD TO CART FOR
GUARANTEED LOWEST PRICES
